The Freestyler Guide

To many ads? Support ODJT and see no ads!

Which form of software DMX control do you use???

  • Martin's "LightJockey"

    Votes: 37 100.0%
  • Chauvet's "ShowXpress"

    Votes: 0 0.0%
  • Elation's "CompuPro"

    Votes: 0 0.0%
  • Sunlite Suite

    Votes: 0 0.0%
  • FreeStyler

    Votes: 0 0.0%
  • I use Hardware

    Votes: 0 0.0%
  • Other

    Votes: 0 0.0%

  • Total voters
    37

rlelek

New DJ
Oct 8, 2006
539
1
34
San Francisco, CA
www.ryanlelek.com
Ok everyone!!! The time has come!!!

It is time to change controlling your DMX lights from expensive, yet proven hardware to the innovative Freestyler software.

This is one of the BEST lighting software controllers I have seen to date. Believe me, I have been through very many of them, but this one beats them all. Here are some of the other software controllers I have seen followed by their advantages and disadvantages.


Martin's "LightJockey" - When people say this word to me, Three words go through my mind. Those words are "Expensive", "Reliable", and "Nightclub." This is probably one of the most expensive lighting software out there, but it does actually work and is EXTREMELY user friendly if you had experience with DMX before.

Chauvet's "ShowXpress" - Once I saw this program, I simply could NOT believe my eyes. The interface was horrible, looked like it came from the 1990's, and, according to Tyrone Blue, had one of the WORST user guides out there. I agree with Tyrone and I decided to move on because I did not have a commitment to this program like many others have because they bought the hardware. I really hope ShowXpress improves for all those people out there.

Elation's "Comupro" - Okay, Okay, we are getting better. At least I saw some sliders and I knew where to start. However, the reason I am steering away from hardware is BECAUSE of the sliders. I simply cannot handle them for DMX programming. Most of the time they are too sensitive and, if you actually can get them more precise, you have to memorize the order of gobos/colors in order to program fast. Sorry... Elation... Not for me....

Sunlite Suite - I decided to try this out because of all of the good things I had heard. However, I was simply turned off by this because I am a novice myself and am interested in nothing more than changing the pan/til/gobo/color of my (future) intels. Next!!!...

FreeStyler - I had encountered the "Free"-Styler a year or so ago and I did not like it then. I was 100% clueless on what to do (i didn't address my fixtures) and I started playing with all the attributes, but nothing happened for two reasons....

1. I didnt address my fixtures

2. It does not have a visualizer so i could actually see what I was doing.

***PLEASE NOTE***
There IS a visualizer included in this program, but we will talk about that later, in the guide.



After searching everywhere for a LightJockey dongle....I decided to give FreeStyler another go. Wow, I was so amazed at the striking similarity between it and lightjockey. Can you say "As close as you can get without violating copyrights"? Well....it was THAT close.

After enjoying this program for a few weeks, I decided to send out a guide for all of you out there who are clueless like I was. Please do NOT take this as an insult, but, rather, a chance to further your knowledge on DMX programming.

The Guide will be posted later tonight. Please give it a read.

Thanks,

rlelek



*Please keep in mind that I am only 14 years old. Please do NOT bash me (though I know the cool people here at ODJT wouldn't). I will try to make this as understandable as possible, but if you have any questions, feel free to message me :D
 
Elation's "Comupro" - Okay, Okay, we are getting better. At least I saw some sliders and I knew where to start. However, the reason I am steering away from hardware is BECAUSE of the sliders. I simply cannot handle them for DMX programming. Most of the time they are too sensitive and, if you actually can get them more precise, you have to memorize the order of gobos/colors in order to program fast. Sorry... Elation... Not for me....

Sunlite Suite - I decided to try this out because of all of the good things I had heard. However, I was simply turned off by this because I am a novice myself and am interested in nothing more than changing the pan/til/gobo/color of my (future) intels. Next!!!...
Ryan, you are aware that Elation's software is built by the same people who wrote the Sunlight suite.
 
Ryan, you are aware that Elation's software is built by the same people who wrote the Sunlight suite.

Well, these were both mentioned because they were marketed as two separate programs and have significantly different appearances.

I did not know that Travis, but I heard about that. I just thought it was a rumor. I did not really look into it because I was not planning to use either of them.
 
Well, these were both mentioned because they were marketed as two separate programs and have significantly different appearances.

I did not know that Travis, but I heard about that. I just thought it was a rumor. I did not really look into it because I was not planning to use either of them.
No Problemo... The good thing about using the elation compupro is you get the product at a reduced cost... But it's also a plus, because although they give you the 2002 version I believe (may be 2004), you could easily zip over to www.nicolaudie.com and download their latest version for free and it be compatible with the elation compu-pro dongle (dmx usb device).

If you haven't played with the current version they make it easy for a touch screen type enviroment. And even allow use of multiple fixtures and everything. You can pre-load all your fixtures, so you don't have to do a lot of programming, as most of the buttons are generated for you... Also common patters such as random movements, circles, pans, all that can easily be controlled by a mouse click or drag to set the speed. Simply apply a button to change the color, or gobo, or effect currently on :)

(I know this was derailed slightly but I just wanna get the facts across, I may post my own sunlight guide)
 
Chapter 1 is DONE!!!

Alright everyone, Chapter 1 of the guide is done. It is jam-packed with info for a novice, but advanced users might pick up a few new things as well. I did my best in writing it and trying to explain things, but I am only 14. I am sorry if some parts are unclear. There is also a hidden bonus at the end!!! I think you should read the chapter first though!!!!


Please post here with suggestions/comments if you have them.


Also, when i converted to PDF, the spacing went kinda off, so please excuse it. If anyone wants a .doc or .odt copy please let me know.

Thanks :sqwink:

rlelek


*I hope to have Chapter 2 done by Monday Night.
 

Attachments

  • rlelek_freestyler_guide.pdf
    55.3 KB · Views: 135
Thanks Ryan for your efforts to share here. It is highly commendable and why ODJT is definitely a different place. Anxious to get the final chapters complete and will be looking towards using this when I acquire my LED cans to go with my martin acrobats.
 
Okay everyone, here is a rough outline of the guide....



Chapter 1: Introduction to the FreeStyler program along with DMX. This chapter also introduces you to the lighting desktop's layout and gets you
comfortable using it.

Chapter 2: This is where the programming really starts, but it will be very basic. Why? Because I want to make sure you go through Chapter 3 before you lose interest in this addicting program. This covers the basics of Scenes (Steps), Sequences, and Cues.

Chapter 3: This is the chapter that introduces you to the visualizer. This chapter will show you the advantages/disadvantages of using it and your many different options.

Chapter 4: Revisiting Programming. This will explore programming advanced techniques in FreeStyler such as Macros, Time Encoding, And Sound Activation, all while seeing them come to life in the visualizer. This is probably one of the most exciting chapters.

Chapter 5: Everything else I know. This is an Odds & Ends chapter as I have not fully mastered all of FreeStyler's power. This will get you started on some of the features FreeStyler offers, some that barely even related to DMX.



That's pretty much what I have right now. After all is complete, I will be releasing a revised version. This will be the one to print out and hold to tight as you start venturing into the vast world of DMX......


Looks like Tyrone's book has a new friend :rofl:


rlelek
 
No, Thank You!!!

Thanks so much for all of this! It's understanding exactly how to use the program that has been holding me back! Can't wait for the rest of the chapters, thank you sooo much!

Well thank you for reading the first part of my guide! It really makes all the time I spend writing worth it. After all, why write a guide when nobody will read it?

I enjoy helping others because I know exactly what it was like to be there. I hear all these good things about programs, and, when I go to try them out, I am completely clueless! Once I spend countless hours of researching, I finally start to get the hang of it, although not always. I then think to myself, "A guide on all of this sure would have been helpful. I hate this User manual because it is boring and does not explain what I want in extreme detail."

I made this guide to help others make an amazing change. And I am glad everyone is using it!!! Why wouldn't you anyway? This is totally free and only involves a small investment under $100 to get the interface ($50 for a basic one I believe).

As already stated, I dislike the sliders on the hardware because it requires much memorization in order to program fast, but FreeStyler is a visual interface that displays everything for you. You can also name your sequences instead of having numbered "banks." All of this for an even lower price than a hardware controller? COUNT ME IN!!!

However, You do not have to sacrifice the concrete interface hardware provides to use this awesome program. There are a few MIDI boards available with assignable dials and faders for use with this program among many others. These only cost around $200.

Anyway you use it, FreeStyler is a great program and I am so glad I shared it with OurDJTalk!!!

:sqbiggrin:

Thanks,


rlelek





*I hope to have a few chapters done tonight. Do not expect them because some things have come up around my house. Between school and my parents, I barely have time. I apologize for this. :sqembarrassed:
 
Oh Man... Im getting excited!!

After getting back from Vegas, I have been looking at all of the Software DMX controllers... and have been soooo lost with all of the interfaces. I have even tried the Freestyler.. I really wanted the chauvet controller to do what I wanted it to, mainly because i have all chauvet lighting.... but I cant get it figured out....

SOOOO again... Thank you very much! who cared if you are 14... heck, back when I was a kid... I had to set the clock on my fathers VCR... some things never change... just the toys! LOL
 
I voted hardware, but I've been playing with Freestyler on and off for a while. I can't get it to save the scenes correctly at this point. Hopefully your tutorial will help.
 
I'm still a hardware guy. I'd like to go software based with a physical controller.

The reason is simple.
The software stuff would be more fun for me but the client doesn't care in the end.

But damnit,
when I wan't blackout, I want it now.
When I wan't full on, I want it now.
When I want s t r o b e, I want it now.
Something about a mouse doesn't do it for me. I can have one hand on my CD players (another hardware thing I enjoy) and one on my lightboard.

actually, you can see me in action here....

god I'm so pathetic....
 
Rlelek

I have printed out, and red the first chapter... Very well written!! I have played with Freestyler a bit, and your information is right on the money! Im looking forward to the next instalments.... I get lost when it comes to the actual programming!

Can I easily program my scanners to do circles? what about adding a delay to the scanners doing a sweep? (the first one moves just a bit faster then the second one.. and so on, it creates a bit of a wave effect??)

please keep it up!
 
Responses

Here are a few responses to the posts in no particular order....

jtnichol - in short, for about the same price you can have a decent DMX hardware controller (Chauvet's DMX-55), you can extend the software to MIDI hardware. All the MIDI hardware has user assignable faders/knobs to ensure you use what you need, and leave out what you don't. I have been looking at the behringer one because of the sweet motorized faders (wonder how long that will last), but there is also an M-Audio one that looks good as well.

That is also a pretty nice video. You look pretty hip and that headband just tops it lol. But seriously, Nice setup and GOOD SHOW!!! and no, you are not pathetic. :rofl:


thatmusicguy - Absolutely 100% YES. Freestyler is audio controllable. It may be a pain, because of the different sound levels from the different sound recordings, but it most certainly is audio controlled. This will be covered in the following chapters, but I will brief everyone on it now as it is probably one of the coolest features.



****------You may control FreeStyler by audio. You may choose to set a random DMX variable that will change with the sound, and, therefore, move the fixtures while changing the gobo/color/other variables. you may turn these settings off if you so choose or you may use the following method. Sound active random variables are one of the BEST ways to get a lightshow up and running quickly.

------You may also choose to have the scenes/steps change to the beat of the music. this is done in the same method as random variables are, but you must already have a preprogrammed sequence. ****


Do not worry if any of this does not make sense to you yet. It will soon because I plan to release chapter 2 and possibly even 3 tonight, but I do have quite a bit of math to do also....so we'll see.......

I also did not walk through the Sound active process as you cannot "see" what happens. Therfore, sound activation will be talked about in chapter 4 or 5.


DJ Scottie - First let me say....THANKS FOR SPELLING MY NAME CORRECTLY!!!

anyway...here are your responses.....

-Thank you for reading my guide. I am glad you liked it. It takes me a considerable amount of time to make this and I want to make sure I cover everything.

-I was confused by DMX programming at first, but Tyrone's guide helped me and put me where I am today. I recommend reading that (or at least an excerpt) before moving on even though I try to explain the base of DMX programming.

-I know for a fact you can do circles. You can obtain this effect by using "macros" which are discussed in either chapter 2 or 4. You may also use some of the other preprogrammed shapes such as "twist", "flower", or "rectangle." I will give you a quick description on how to use these macros.

***-------In order to access these features, open the "Pan/Tilt" attribute window. under the coordinate plane, you will see what I like to call the "Macros Section." Turn the "Off" button to "On" and watch the magic happen :sqlaugh:

----Amazing isn't it? switch the shapes by using the pull down menu, but do not stop there!!! click the "view" button and see the shape. Drag and drop the dots to make a unique shape all your own!!! Have Fun!!!---*****

I am not sure of the "delay" you are talking about. you might be able to get this effect by using the "fanning" section in the "Pan/Tilt" attribute window, but please do not quote me on that.



Thank you all for your time..... and please keep the suggestions/questions coming! You can talk to me via AIM with the screen name "MeatWad636"

In the mean time, continue exploring FreeStyler and HAVE FUN!!!




rlelek