Ryan.....thanks....My intent is using the zone out on my mixer as i do with my hardware controller and somehow feeding that to the laptop where Freestyler is loaded and running the lights in a similar manner.....
So Ryan - Will I be able to do this?
Ryan.....thanks....My intent is using the zone out on my mixer as i do with my hardware controller and somehow feeding that to the laptop where Freestyler is loaded and running the lights in a similar manner.....
Ace but this thread is a how to operate the freestyler and with that in mint it isnt relevant noting the tool others are using if thats your tool touch on it in a thread and donate the time Ryan is with this thread thanks.
So Ryan - Will I be able to [run audio out of my mixer to control FreeStyler]?
You can probably output in RCA jacks (Red & White) from your mixer and hae the other end be a 1/4" headphone jack that can plug right into the microphone jack

Don't run Line-Level outputs into a Mic level input - even on a computer. Always use the Line-In! I think on some laptops the mic input does double-duty as a line-input when there are only out/mic jacks, but in general always run sound into the blue line-in jack.![]()
If it is indeed solely a MIC input, I would lower the zone-output on the mixer (or whatever you're running into it) wayyy down. Otherwise it would be way overloaded and either damage the soundcard or simply not work well at all.
That would help, but if it was completely overloaded that may not work? Not sure on that one, you'd have to test it out.
I don't wanna damage the soundcard, nor do I want others to and to blame meI'm assuming that running freestyler on a dedicated laptop is best, but as far as using a laptop to play music, I use and recommend an external soundcard anyway, as they are MUCH clearer than internal audio on a laptop. Most of these will have a line-in on them, so at the least you might want to use one of those here too. Might not be that big of a deal though. $0.02 :sqconfused: