EAW

To many ads? Support ODJT and see no ads!
Any RCF dealer can help you out, just have the driver info handy. EAW won't be of any help since they no longer deal with RCF.

Steve, do you think that RCF would know the driver info if I were to call and ask them. I don't have the cabs with me right now. Also, do you think that RCF would still make a speaker to EAW's specs being that they no longer deal with them (I just don't want to throw any RCF soofer into the cabinet). I heard that EAW is using Emminence now. Is that true, and if so, what's your take on that?
 
Eminence drivers and horns are OEM for many pro grade speaker system manufacturers. You may wish to browse Simply Speakers for replacement drivers.

Hope this helps.
 
Take one of the drivers out of the box. It should probably have a part/model # on it. Then call an RCF dealer for a replacement.
 
Thanks guys. I spoke with EAW today & they said that they are using Emminence in their new cabs but if you have the older cabs with RCF, they can still re cone them or get you new RCF'S because they still do deal with the company.
 
I wonder how long before EAW switches to Celestion drivers... They probably have Celestion designing drivers for them as we speak, since both EAW and Celestion are now in China. It would make more sense. Unless Eminence is setting up a factory in China but I have no word on that.
 
I wonder how long before EAW switches to Celestion drivers... They probably have Celestion designing drivers for them as we speak, since both EAW and Celestion are now in China. It would make more sense. Unless Eminence is setting up a factory in China but I have no word on that.

Hey Steven,
I was on the phone with EAW for more than a half an hour today. Not only did I speak with them, but I spoke with 3 other "EAW authorized dealers" including RCF themselves! I was on the phone today for hours. I was getting pulled in every direction. RCF told me out right that they don't sell to the public, so you have to go to a dealer. EAW says that they use Emminence now and that people shouldn't judge a driver by the manufacturer, but by who's making the specs for the driver... (and in this case... EAW). They said that RCF is a very good company, but if they put their name on a crappy speaker, it still would sell because of the name RCF.
And like I mentioned before, a huge misconception is that EAW does not deal with RCF anymore. They told me that they bought RCF years ago, and then sold it, but still do business with them. They also said that I shouldn't mix and match old and new parts (RCF & Emminence), and that they could still either re cone or replace the RCF drivers if need be. They did also admit that they downsized their company, and that most of the work is done in China now. They brought up the Mackie issue to me as well. They mentioned the Mackie SRM 450's (I owned a pair of the originals, with RCF drivers few years back). They told me that when Mackie used RCF drivers, 50% of the product got returned because of cracked magnets. Now I NEVER had a problem with my Mackies... and when I asked a dealer by me about the 50% returns.. he said that was bull sh!t. EAW also said, that if you were to physically looked at the RCF drivers side by side compared to the new drivers they use (I forgot the name), you would think that the RCF's were 1000 times better, because of the physical appearance of the speakers... but the new ones sound just as good, and hardly get returned. Is that true? I don't know. I heard nothing but bad things about the new Mackies.. I heared that they sound muddy and low compared to the original ones.

3 dealers told me that EAW deals with multiple manufacturers (at least 7), and that as long as the driver is made to EAW's specs (or close to it), don't sweat it. One told me that Emminence is the LARGEST manufacturer of drivers in the world....:sqconfused: I don't know. I heared very good things about them, including from one of my partners who's been in the business for almost 30 years... but on the flip side... I've read a couple of bad things about them on this site. I always dealt with EAW for most of my career, and thought that RCF was the way to go. I don't know, but I've been in the business for over 20 years, and I have a pretty big mobile DJ company based in N.Y. & N.J., with 10 partners (all owners) in all.. and between all of us, we have over 20 pairs of EAW (JF 560's, 590's & SB 250's). We also deal with JBL (EONs & FBT).

So what I'm going to do is drop my cab (SB 250) at my local dealer who I normally do business with, and have him order a few re cone kits, (which they said won't be in until August 31st), and recone my cab, and keep a few kits on the side, just in case :sqeek:

Thanks again everybody for your input.
 
Whats good BigSpinnerDoc? Sorry to hear about the run around you are getting with the EAW sub. The recone by a professional shop sounds like the best move as you stated. The newer Mackie SRM 450's are not too bad. They just get too damn hot too fast. I don't own them but like you said they are not as good as the earlier models you had.
The whole China movement pretty much pissed me off also. I love the LA cabs from EAW., but now that they are changing around, I will stick with RCF and Yorkville these days. They fit my operating budget and perform quite well.
The only true speaker company I would trust now would be EV. I like the ZX5 passive cabs. Good luck with recone. I've seen some of the set up's that Dash uses and you guys are running some really nice rigs. Keep up the good work.
 
See me remarks in BLUE.

Hey Steven,
I was on the phone with EAW for more than a half an hour today. Not only did I speak with them, but I spoke with 3 other "EAW authorized dealers" including RCF themselves! I was on the phone today for hours. I was getting pulled in every direction. RCF told me out right that they don't sell to the public, so you have to go to a dealer. Yes, just talk to a RCF dealer, they should be able to help you. EAW says that they use Emminence now and that people shouldn't judge a driver by the manufacturer, but by who's making the specs for the driver... (and in this case... EAW). Bull tweedy. Not anyone can build a driver up to the proper spec's. Do you see Ferrari subbing out their racing engines to be made by Hyundi? No. They said that RCF is a very good company, but if they put their name on a crappy speaker, it still would sell because of the name RCF. RCF would not put their name on a crappy speaker, that is the difference.
And like I mentioned before, a huge misconception is that EAW does not deal with RCF anymore. They told me that they bought RCF years ago, and then sold it, but still do business with them. Then why don't they still use their drivers? I'm sure they can still place an order with RCF just like anybody else but sounds like their pushing Eminence. They also said that I shouldn't mix and match old and new parts (RCF & Emminence), If the Eminence is built to the same spec's it should not make a difference. They are afraid you'll A/B them side-by-side after and hear the difference, then proceed to tell everyone about it...and that they could still either re cone or replace the RCF drivers if need be. Let them. They did also admit that they downsized their company, and that most of the work is done in China now. Going for the money... They brought up the Mackie issue to me as well. They mentioned the Mackie SRM 450's (I owned a pair of the originals, with RCF drivers few years back). They told me that when Mackie used RCF drivers, 50% of the product got returned because of cracked magnets. An out-right lie... After saying something like that, I wouldn't trust anything they told me. Now I NEVER had a problem with my Mackies... and when I asked a dealer by me about the 50% returns.. he said that was bull sh!t. EAW also said, that if you were to physically looked at the RCF drivers side by side compared to the new drivers they use (I forgot the name), you would think that the RCF's were 1000 times better,That's because they are! because of the physical appearance of the speakers... but the new ones sound just as good, and hardly get returned. They may sound good for the first few minutes until the voice-coils start to heat up... And NO, the new Mackie's with the Chinese Celestion drivers DO NOT sound as good as the old ones. Is that true? I don't know. I heard nothing but bad things about the new Mackies.. I heared that they sound muddy and low compared to the original ones.True.

3 dealers told me that EAW deals with multiple manufacturers (at least 7), and that as long as the driver is made to EAW's specs (or close to it), don't sweat it. Yes they deal with multiple driver suppliers or at least DID. Now it sounds like it's Eminence or broke. Is there an Eminence plant in China yet? One told me that Emminence is the LARGEST manufacturer of drivers in the world....:sqconfused: They are one of the largest supplier of OEM drivers in the world if not the largest. They can make a great product. I don't know. I heared very good things about them, including from one of my partners who's been in the business for almost 30 years... but on the flip side... I've read a couple of bad things about them on this site. I always dealt with EAW for most of my career, and thought that RCF was the way to go. EAW knows that an RCF woofer is hard to beat which is why they used them in their high-end cab's. Yorkville used them in their famous 800 & 808 Elite series cab's and got their great reputation. Now they use Eminence and still sound good but not as good as they used to.... I don't know, but I've been in the business for over 20 years, and I have a pretty big mobile DJ company based in N.Y. & N.J., with 10 partners (all owners) in all.. and between all of us, we have over 20 pairs of EAW (JF 560's, 590's & SB 250's). We also deal with JBL (EONs & FBT).

So what I'm going to do is drop my cab (SB 250) at my local dealer who I normally do business with, and have him order a few re cone kits, (which they said won't be in until August 31st), and recone my cab, and keep a few kits on the side, just in case :sqeek:Sounds like a good move to me. Good Luck!

Thanks again everybody for your input.
Anytime!
 
Whats good BigSpinnerDoc? Sorry to hear about the run around you are getting with the EAW sub. The recone by a professional shop sounds like the best move as you stated. The newer Mackie SRM 450's are not too bad. They just get too damn hot too fast. I don't own them but like you said they are not as good as the earlier models you had.
The whole China movement pretty much pissed me off also. I love the LA cabs from EAW., but now that they are changing around, I will stick with RCF and Yorkville these days. They fit my operating budget and perform quite well.
The only true speaker company I would trust now would be EV. I like the ZX5 passive cabs. Good luck with recone. I've seen some of the set up's that Dash uses and you guys are running some really nice rigs. Keep up the good work.

Thanks John.
How was vacation?
 
See me remarks in BLUE.

Anytime!

You are hilarious Steve! :rofl::rofl:
Thanks for addressing every one of my comments! lol.
I agree with you 100%. You are right on target. The only thing that I don't understand is if EAW still deals with RCF, why change to Emminence? RCF puts out a great product. A friend told me that Emminence is the biggest OEM company around (as stated before), but that doesn't make them the best as far as quality is concerned. Like I mentioned before, I've heard great things about them, but my main concern is that the original EAW products are going to sound far more superior as compared to the newer ones. Just like the Mackie scenario. It has to be a political thing. I don't know how true this is, but I heard that the unions in Italy are powerless and these big companies get easily strong armed. Who knows.. just as long as the company (EAW) doesn't go down in quality and service, I don't care.