Input wanted.... NEW GIG BENCH...

To many ads? Support ODJT and see no ads!
G

Guest

Guest
I'd like your thoughts and comments. This is the bench I built last year for my club gig on the "party dock" every summer.

Last night, DJ Richie and I did a gig at a local bar, where they originally wanted us outside in the parking lot under a small tent. Due to the weather, they had us set up inside.

We got to talking about fast set ups and breakdowns and decided that I'd build a new gig bench... only this time out of metal. I can put this old bench into action in under 5 minutes and wanted to keep that aspect for my new bench.

The posts are tri-pod crank ups that allows me to fit through doors, then raise the truss. Keep in mind that my sub weighs over 100 pounds and the rest of the gear puts the entire bench at over 200 pounds... thus the big wheels.

I'd like to hear any and all suggestions regarding a new bench, and I'll incorporate them into my new bench. NOTE: I covered the old bench with Grundorf carpet and hung a velvet drape from the edges of the table top (which I like).
 

Attachments

  • Bench 4.jpg
    Bench 4.jpg
    118.4 KB · Views: 15
Two extra pictures...

This is the table finished... so you can see what I came up with.
 

Attachments

  • !Finished gig table back 2.jpg
    !Finished gig table back 2.jpg
    33.4 KB · Views: 14
  • !Finished Gig Table 2.jpg
    !Finished Gig Table 2.jpg
    36 KB · Views: 12
Hey Tyrone.

I love your bench and for the last few weeks it's inspired me to create my own version for my bubble parties. I was thinking of throwing a powered speaker where your sub is and then have a basic mixer, wireless mic, bubble machine and laptop all prewired and ready to go. All I would need to do is roll the case in and find an outlet and bam, ready to go.

I'm figuring the total weight would be under 100 lbs.
 
I like it Tyronne...............does it just roll onto trailer, after you have lowered speakers? Are wiring connections maintained through teardown? Looks good
 
Forget the magic DVDs - Sell Gig Benches! Nice job, and you can bet I'm gonna work up a copycat....Thanks!
 
Any new ideas yet???

When I built this, I tried to figure everything out before hand... guess I got it right the first time, unless someone has any ideas.

Should I mount the top speakers below the drape too (so they're on the same level as the sub)? Will this cause sound issues?

I also thought I'd add extensions onto the truss, so it would be wider once I set it up.

And Gray... yes, all I have to do is unplug it and lower the truss so it will fit through doors. All the cables are pre-wired. I can have it put away only a minute or two after I have decided to shut it down.
 
This is the table finished... so you can see what I came up with.

Damn that's sweet Ty!

Personally I wouldn't mount those tops any lower...just my opinion. Of course you already know the lower you have those tops the more things like bodies, tables and chairs will affect how far the sound will travel.
 
Sweet,

How do you handle stairs, risers, or stages?

I often wondered if one could modify a "hospital gurnee" into something like this?

Could pcv pipe be used as a lighter material for base frame? Steel pipe would, but would it increase or decrease weight?
 
i wish i was 1/10 as creative as that....
very nice...can't think of something to improve on that.
 
Guys, I think you're missing what Tyrone said. This bench is NOT part of his mobile setup. The bench was created for his club gig and he just keeps it at the club.

I would reckon that whole thing weighs in at over 200 lbs. Not something you want to move yourself into your vehicle.
 
Looks Great! I love that idea!
my only suggestion is mabey some support in the middle at the bottom, mabey a middle set of wheels. It looked like it was drooping in the middle where the sub sits in the first picture.
 
Guys, I think you're missing what Tyrone said. This bench is NOT part of his mobile setup. The bench was created for his club gig and he just keeps it at the club.

I would reckon that whole thing weighs in at over 200 lbs. Not something you want to move yourself into your vehicle.

Not always. But I could still see how it might work for a mobile.
 
Metal vs. wood...

I agree about the middle swaying just a bit. That speaker is really heavy, which is why I want to build the next one with metal. I'm trying to talk Marie into letting me buy a MIG welder so I can make it out of aluminum (and I have this idea about making my own custom trusses).

My trailer door is just a tad lower than what I can lower this truss down to, so I'd agree that I want to be able to get it lower so I can get it into my trailer. If I use aluminum and weld the crank-up to the frame, I think I can do that.

The reason I was asking, was that I don't know how far apart the top speakers should be. I got the answer about not having them any lower... thanks. I was just wondering if anyone had ideas that I hadn't thought about yet.

So, OK, if this next one works out, I'll try to sell one to any one of you folks. I'll take photos as I progress with the "build" and post them as I go. It will be several weeks, since I'm in the process of building a deck in the back yard... damn, are my arms sore.