Your best gadget you came up with

To many ads? Support ODJT and see no ads!

MADNESS

Well-Known DJ
Dec 20, 2006
2,293
49
65
Florence, AZ
www.primetimedj.net
Every one has some little time saving gadget or something they came up with that has made the job easier for them. Some thing that we saw as a problem and went HMMMMM and came up with a solution for it.
Please share these so we all may benifit from your ideas, or maybe build on them.

I have 2 off the top of my head

1. I was looking at the wires on my speaker stands and light stands at a wedding and hate having the wires show. I had some spare time after set up and ran to walmart and picked up 5 of the 5 foot length of artificial flowers. Zip tied them to the top and wound them down the stand. Looks nice and easy way to cover wires at a wedding.
2. Got tired of how my rack and cd case looked. made fabric skirts and attached velcro to the rack case and my cd case. There you go ready made skirts you just wrap around your equipment.

I will look to see if I have any pics to show what I mean.
 
I build a wireless hard hat camera for video parties.

Added an outlet to my powered subs to power my tops and added 25' of cord.
This allows me to power one side off the other also when outlet location dictates speaker placement.

f7ccbba9.jpg



I utilized a 4 shelf rolling rack that keeps all my lighting on wheels in the trailer which helps considerably with load in/out.
 
I build a wireless hard hat camera for video parties.

Added an outlet to my powered subs to power my tops and added 25' of cord.
This allows me to power one side off the other also when outlet location dictates speaker placement.

f7ccbba9.jpg



I utilized a 4 shelf rolling rack that keeps all my lighting on wheels in the trailer which helps considerably with load in/out.

Do you have nay pics of the camera, that is a fantastic idea!
 
I've had a ramp for years,, it's the best thing... I use a 8 foot piece so the angle isn't so steep..

Saves me many times,,, I can back up the van, span the steps, or at a loading dock I can back right up to it...

If I have a tall stage I can bring the ramp in to get the gear on,,,, and in one or two cases I used it to block people from getting to close...

The other thing is EVERYTHING is on wheels.... don't carry if you don't have to!
 
I'll agree with the custom made skirting. Shirl is mighty handy with a sewing machine and made the skirts we use to cover our rack stack.

One thing we did to save load time was to mount the wireless mic receiver inside the frontend case. It is attached via Velcro and stays connected up to the mixer. The mics are stored in there as well. It's all plug 'n' play.

Patch cables and power cords that go between the cases are stowed in the cases and marked with colored tape. When we set up, we connect a few XLRs, AC power cords and Speakon cables. A slice of colored tape is also attached next to input jacks so we get the right connections every time.

Unused Speakon jacks (passive crossover inputs) on speaker cabs are covered with black electrical tape.

Hope this helps.
 
ea3c2174.jpg


ea3c2061.jpg
 
Added an outlet to my powered subs to power my tops and added 25' of cord.

Did you have an Electrican add the "gang box", or are you electric savy? Great idea......
 
No, that was my own idea.
I used low profile outlet boxes and the wiring was a snap really.

Thank you

Rick
 
I have drilled 3 Holes in the bottom of my rack case (On wheels), 1 for AC Cords, 1 for Audio, 1 for Aux. (Mics). cables, cords go out the bottom. I leave all cables, Cords/Cables color coded as Fred mentioned for quick hook-up. I have 2 completely seperate Racks, both on wheels, set up this way, I can switch one to the other in a few minutes time. One is Karaoke, the other is DJ with my Numark HDCD1 Player/Hardrive. I am going to look into mounting the mics as Fred indicated
 
No, that was my own idea.
I used low profile outlet boxes and the wiring was a snap really.

Thank you

Rick

So you tied into A/C Wires in speaker, and used something like a "wire nut" to secure, and then cut into speaker cab, to mount switch plate?

Thinking about doing this because when I set up with (4) Tops and (2) Subs, it's quite a run from the outer most speakers back to my rig.
 
I ordered the foam and the drawyer from ProGear Warehouse. There is a bottom piece of foam, which is about half an inch thick. You put that in the bottom of the drawyer, then there is a thicker piece that takes up the rest of the room. The foam is made up of tint foam squares that are glued together by commercial adhesive, so you put a cut between the squares towards the top to seperate the first layer of adhesive, then you "pick-and-pluck" the sections you want out.

Inside the case are two Shure PG-58's (whos recievers are rackmounted above the mixer, right under the shelf) and two AKG D2200s, as well as the two shure mic clips, two windscreens, the squelch adjustor tool for the Shure mics, and the gooseneck BNC light for my mixer. Not to mention the 5 9v batteries :sqwink:
 
Very nice mic storage for sure...or Shure...good idea on the batteries too.

Gray, The cord is cut 3" from the strain relief and this box screws down over it to which the outlet is wired and the 25' cord is wired also, so the outlet is actually the buss as well because if has 4 screws and a ground terminal.
Any Home Depot has these.

bd52_1.jpg
 
I build a wireless hard hat camera for video parties.

Added an outlet to my powered subs to power my tops and added 25' of cord.
This allows me to power one side off the other also when outlet location dictates speaker placement.

f7ccbba9.jpg



I utilized a 4 shelf rolling rack that keeps all my lighting on wheels in the trailer which helps considerably with load in/out.


how did you route the power out from the sub into the outlet box?
 
Finding the most knowledgeable, open, honest and sharing DJ forum on the net! :sqbiggrin:

ODJT