The worst luck ever! What to do about my blown sub?

To many ads? Support ODJT and see no ads!

LoudspeakerDJ

New DJ
Nov 16, 2006
116
0
48
I can't believe it. I was finished seting up for an event last night. The cocktail hour had ended, and it was time to crank up the juice. Come to find out, one of my subs was not working. Let me tell you how I got it...

I use all Yamaha speakers, this is because when I started many years ago, it is what I bought, and now I am happy with them, and want to keep everything the same. Well recently I ordered a new 18 sub to add to my other one, for a little extra punch. Guitar center botched my order up, so the manager offered the JBL JRX118S for me to use for this event. He basically applied my purchase amount for the yamaha sub, towards this one, so in essence I bought this sub. I am now supposed to return it, and exchange for the yamaha when it arrives.

When I picked up the JBL, I set it up and tried it out. Not as nice as the yamaha (To my surprise), but I new it would work.


Well, not 5 minutes into my set, and no subs are working. I disconnected the jbl, and the yamaha works fine. I was running them wired parallel on a bridged crown xls-602D. Did I blow this thing?

Any idea what the warranty is? What would you do about this. I sure as hell dont want to get stuck with a 400 wooden box!

Man, I have the worst luck.:sqmad: :sqmad: :sqmad: :sqmad:

sub.jpg

Here it is in my garage being tested out.

sub2.jpg
 
That bites. :(

Since the JBL is slated to be exchanged for the Yammie sub anyhow, simply return it and get the sub cab you want. The JBL is under warranty so there should be no issues there.
 
Did it not work at all? The sub may not be blown... push the cone in and if you don't feel scraping, you may be safe.

Check the terminals for oxidation.. the Eminence drivers (found in the LS800Ps) have had problems where the oxidation broke the clip off the terminal...
 
Did it not work at all? The sub may not be blown... push the cone in and if you don't feel scraping, you may be safe.

Check the terminals for oxidation.. the Eminence drivers (found in the LS800Ps) have had problems where the oxidation broke the clip off the terminal...


It worked in my garage before the event. It was when we cranked it up that it when kaput.
 
Do not open it up and just tell them it never worked at all.

My JRX subs have one of those sticker seals on them if you open it up, it'll void the warranty.
 
It worked in my garage before the event. It was when we cranked it up that it when kaput.

The Crown XLS series amps are not to be used for a 4 ohm load when bridge. They can be used for a 8 ohm load only. What happen is the crown went in to thermal mode, and the amp muted the output transistors.
 
The Crown XLS series amps are not to be used for a 4 ohm load when bridge. They can be used for a 8 ohm load only. What happen is the crown went in to thermal mode, and the amp muted the output transistors.

I tried it at the end of the event, in stereo mode. No dice!
 
ROTFLMAO........

they might as well call the JRX series "Jerk-Offs" or "Jerx" because they are the most crappy speakers JBL ever produced.

Those subs are an INSULT to the JBL name.

First off, 300 watts is NOT enough power for a subwoofer. Minimum should be 600 watts, Optimum is 800-1200 watts.

Secondly, the drivers are manufactured in China. Quality Control is spotty at best.

Last nite, my B-52 ACT-18's were placed next to each other (for a coupling effect)......I had them dialed at "12 o'clock" and the walls/floors were shaking.
Now THAT is a lot of bass (understandable when you have 800 watts powering each 18" speaker)!!!
 
ROTFLMAO........


First off, 300 watts is NOT enough power for a subwoofer. Minimum should be 600 watts, Optimum is 800-1200 watts.

That's why I was running them bridged. Produces alot more at 4 ohms.
Somone above posted that this amp cant do bridged 4ohm loads. I was surprised to hear this, for I read the manual from front to back. Didn't read anything like that. I guess I am spoiled with my qsc amps. They have alot more functionality built into them.
 
For a sub to suddenly "blow" and stop playing there would be a STRONG odor coming from the sub.

Was there a burning smell?

If not, open the cabinet. By bridging that amp at 4 ohms you produce a LOT of heat... crappy wires will burn out... check the terminals of the sub and check for burn marks or oxidation.
 
I'm not a sound expert, believe me......but I can tell you (from first hand and the experience of others) that you cannot get a silk purse out of a sow's ear.

8 OHMs is the only way to ensure clean distortion free power AND cooler operating temperatures.

Even the ACT-18's are dicey when you run the 4 ohm mode (1200 watts divided into Master and Slave getting 600 watts apiece 4 ohms each.)

I've had other DJs tell me about problems they had with the ACT 18 Master/Slave combo.

That's why I decided to use both powered versions, each one having its own amplifier, delivering a full 800 watts at 8 ohms each speaker. You also have more redundancy, because one blown sub means you still have one functioning.

The first ACT-18 cost me $650 in a Red Tag sale at PSSL.com.
My second ACT-18 was purchased at MBLV '05 for the same amount by Franz, who didn't like it because of the noisy cooling fan, and two months later, sold it to me for $700 (he installed a $40 fan to quiet the fan noise, and he also drove it from Las Vegas to Reno, so there was a shipping fee I guess).

For under $1400, I've got two monster cabs that will literally shake the floors off the foundations.

When I have a quiet wedding (where noisy fans can be a problem), I'm only using the single Franz-modified ACT-18 by itself.
 
I'd haul ot back to GC and keep my mouth shut as to any problems!

The dummies at my local Gc would never check to see if it works.
If they call you the next day, "geez it worked fine for me"
 
As I understand the gist of this thread, the author took the JRX sub cab in lieu of the Yamaha sub he ordered. He has the option of returning it for exchange with the Yammie when it comes in.

So, return the thing and exchange it for the Yammie. What went wrong with the JRX is a moot point. It don't matter. :)
 
And being that this is a moot point, AND you are going to return it anyway, DO NOT CRACK THE CABINET TO SEE WHAT WENT WRONG! You will most likely be liable for any damages if you do. It's a loaner until you get your Yammie anyway. And I bet if you look on that label, somewhere it will say something to the effect "No user servicable parts inside. Return to the place of purchase...."

Why open yourself up to scrutiny from your local GC? If you have a decent relationship with them, don't do anything that would tarnish that rep.

No one should EVER open a piece of equipment that is on loan. It doesn't belong to you. The best thing to remember under these circumstances is the old saying that you see in antique or china shops - "You break it, you buy it".

Just my two cents.
 
I have Crown XLS 602's and I have jrx 18"s I have the 602-B, you can run 4 ohm Bridge with thw a and b but not the c and d

The speakers can't handle the slightest bit of DC clipping. I'm assuning you were clipping the amp and burnt up the voice coil. I have done it 4 times. I have replaced the speakers with Peavy BW.

I hope for your sake GC thakes back the sub if you burnt the voice coil.
 
8 OHMs is the only way to ensure clean distortion free power AND cooler operating temperatures.

You might want to rethink that

And by the way Matt plastic is for toys :sqeek:

as others have said do not open the cabinets. First off they arent yours and second if they were they are under warranty
 
How about this?

Take the sub back that they loaned you and tell them what happened. Let them check it out and repair it as needed, then pay them the cost for the damage if it was caused by misuse.