Why is nothing loud enough?

To many ads? Support ODJT and see no ads!
Ben,

I don't know how many bar gigs you have done, but I have done thousands over the years, using EV, JBL and Peavey speakers. All are capable of giving him what he needs sound wise, just some are not capable of taking the power.

I can tell you from experience that the vast majority for regular bar gigs are 200 people or less with the majority being on the much less side. Any bar with a capacity of 100 or less I run a single sub system and can shake the room without a problem (Using oh my god a single Peavey sub).

The concert level sound systems like the Vertec and EV's top end midline XAs are indeed awesome systems but in general are way beyond what a Mobile DJ needs to do their job.

A lot of people don't understand the cost or even the concept of a neodymium magnet and the difference in power to weight it gives over a ferrite magnet. But the truth is most DJs would rather carry the extra 15 pounds than pay that difference in price. That is also the reason EV and JBL only put them in their TOL boxes. By the way Peavey did that in the original "Q" series between DTH and the new "Q", but no one was buying it because of two things PRICE and the DISS factor of Peavey gear in general.

Well.. the answer to your question would be thousands over my 15 year career as a mobile. But I felt it was irrelevant to his question. One off the things I have had to work hard on during my 13 years at NLFX is to NOT project personal viewpoints onto my customers needs. I was attempting to see HIS challenges and not respond with my own personal experiences which can be limited in scope. I never used an XA or a VerTec rig at a bar, and I would probably agree with you if I had never worked on this side of the fence. In fact, as I said in another post... I used to use Peavey gear at one time in my life. What I have learned though is that DJs have a variety of business models and it is not one size fits all. There ARE DJs out there using XA and making a LOT of money doing it!

That all being said, I didn't know if he was doing small bars or not. What I do know is that he gave us an equipment list and said it was failing him. I was not the first person to post the XA in this thread, but I agreed with that member that it would eliminate those problems and open a new market to him. He could easily be doing schools or corporate events of up to 2,500 people.

Cam memtioned that he was renting systems from people for these larger gigs, and this could put him on the other side of that equation. He could be the guy RENTING his gear out. In the proper setting the XA can pay for itself VERY quickly.

I think you hit the nail on the head earlier though. Properly matching speakers to amplifiers and setting the signal chain correctly will solve many needs. But there is still only so much you can get out of a given line of components.

At any point I think we're beating a dead horse and frustrating Cam. The XA is not the right solution for him.

Ben
 
Ben,

I agree with you and I am not arguing your point it is well taken and I agree an awesome system is an awesome system.

But some points here.

Rentals, years ago I did a lot of rentals to DJs and bands and had a lot of large rig. I stopped renting to most DJs because of the R&R that had to be done each time the rigs came back, or having to hunt them done to get my gear back.

I have been down sizing over the last few years. One of the reasons is two local sound companies one using a Meyer's system the other using an older Turbo system. Either one will come in and setup a system to cover a 2000+ person event for as little as $500. I can't compete with that and I can't afford not to use them when I do larger events in the area.
 
I have been down sizing over the last few years. One of the reasons is two local sound companies one using a Meyer's system the other using an older Turbo system. Either one will come in and setup a system to cover a 2000+ person event for as little as $500. I can't compete with that and I can't afford not to use them when I do larger events in the area.

WOW! That's all I can say.... WOW! That is CHEAP! Most wedding jocks using speakers on sticks make more than that, some many times that. Heck, you're right... you can't afford NOT to use them.

Hopefully your market rights itself so good people can make a reasonable living again someday.

Our mission at FX is to make our customers successful. If our customers are successful and financially healthy that will always pay dividends to us. So it's not lip service when we say that we want to partner with you. We do. We want to help you be as successful as you can be!

Ben
 
Ben

I am not talking about them doing a DJ job. Only the fact that they can come in and setup then come back and break down a sound system for that amount. The Dj or the band still has to do their job for the night. But I still can't compete at that rate for a sound system rental.
 
The great thing about Yorkvilles-- it takes a lot of stupidity to blow 'em up. Even if they do, they come with a 3 year (or is it 10?) warranty against ANYTHING, even if you mod the speaker!

The Yorkville "no fault" warranty is two years and covers damage to drivers and electronic components. The Elite and Unity series also have a 10 year warranty against defects in material or workmanship for the cabinet construction. I seriously doubt they would cover modified products (if they were aware of it).
 
Yes, they do cover modded products.. in example:

The contacts in the LS800 series will oxidize real easy (bad batch, I assume.) I needed the sub the same night so I opened it up and bypassed the contacts.

They covered it when I sent in a new cabinet.
 
No matter what I do I can never have enough volume.
.
.
.
I'm open to some suggestions.
People, I think you're all missing Cam's main problem...

CAM, YOU'RE GOING DEAF!!

(Is a smiley really needed here??)
 
People, I think you're all missing Cam's main problem...

CAM, YOU'RE GOING DEAF!!

(Is a smiley really needed here??)

Bryan, I've been thinking that since this thread started! I'm glad you were brave enough to say it! LOL :sqerr: :sqwink:
 
Cam hope you find humor amongst your loss (bet you thought I was going to continue with HEARING!) but seriously folks hes been through how many repaired or replaced Subs. Perhaps it calls for upgrading from those Mackies. I (and only in my minimal sub experience) would be moving on from the Mackie world and adventuring into something that can be music to even your ears. Guests, Clients and friends will surely notice nothing has changed.
 
Cam -

What is a "reasonable" amount of money that you want to spend on this upgrade? That will help me find the best bang for your buck. I feel your frustration, continually toasting voice coils and not acheiving results. I think we can help stop the financial bleeding here.

Ben
 
Thanks Ben,

Reasonably Speaking I would spend $2000 on a pair of 18"s. I'm really not fond of active speakers so that would be passive. I have Mackie 2 FR2500 and a QSC 3402 at my disposale so powering them should not be a problem. I do plan to add another amp to my arsenal after new subs. I'm open to options for suggestions if you feel the 3402 is not enough.

My recent thought has been to try a pair of JBL SRX subs.
 
Thanks Ben,

Reasonably Speaking I would spend $2000 on a pair of 18"s. I'm really not fond of active speakers so that would be passive. I have Mackie 2 FR2500 and a QSC 3402 at my disposale so powering them should not be a problem. I do plan to add another amp to my arsenal after new subs. I'm open to options for suggestions if you feel the 3402 is not enough.

My recent thought has been to try a pair of JBL SRX subs.

Hmmm... on a pair of 18s. Well... I'll tell you... Community's Tandem Drive has a dual 18 that just HAMMERS. It's in the $1,000 price range, and they're made right there in PA. As Duece mentioned, I'm headded out there at some point for training and I could arrange a factory tour and you could leave with two brand new boxes. :) If two of those don't do it I don't think any speaker in that price range will. That would give you 4 18s in a pair of very compact boxes.

I'm a big fan of the 3402, but not so much the Mackie. I don't think the 3402 is enough for the TDs though. Probably better off getting a 1802 or 2502 and bridging it for each box. I'd use the 3402 for your top boxes with the two 1802s for your subs.

The speakers are only part of the equation... you need to properly power them or you'll have the same problems you're having... frying voice coils. I will tell you that we've installed HUNDREDS of Community TD series speakers, as far away as Tokyo. You don't install a speaker on another continent unless you're confidant that they will not have problems. If you let us help you design the signal chain, life should be trouble free.

Ben
 
Cam

Have you ever measured it off with A decibel meter? Ill bet its alot louder than you think it is. Two things will make us think its not as loud as it should be continued exposure and quality sound

If I were you I would take the measurements before spending the cash to get the same results
 
Thanks Ben,

Reasonably Speaking I would spend $2000 on a pair of 18"s. I'm really not fond of active speakers so that would be passive. I have Mackie 2 FR2500 and a QSC 3402 at my disposale so powering them should not be a problem. I do plan to add another amp to my arsenal after new subs. I'm open to options for suggestions if you feel the 3402 is not enough.

My recent thought has been to try a pair of JBL SRX subs.

Cam, I would get a pair of Yorkville LS 808s. They can put out a 135 db with 1000 watts. They will handle a 1600 watt peak. The other choice is the EAW LA 400. You will need to use two of them coupled at all times. I found this to be a big draw back. The EAWs are also very large.

The LS 808 has a sensitivity rating of 105 db and the LA 400 is 107 db. The Yorkville will peak a 137 db and the EAW will do 140 db.

I use the Yorkville 808 sub it is awesome. I push it with a bridged Peavey CS 3000. This system sounds great and hits very hard.
 
Have you tried coupling your subs (placing them right next to each other)?

If that doesn't work, I think I found a solution for you.

bassault-rsm.jpg

http://www.bagend.com/bagend/bassault-r.htm

I like this sub... Hi guy's my name is Tony Crush DJ from the Bronx NY:sqcool:
 
Welcome Tony I was enjoying your Website. GLad you joined us what brought you to our neighborhood if I may ask. Hope you enjoy our site we enjoy active, honest sharing and networking here hope you find it a great place to hang.Cam sorry for the hijack. Resume the Boom!!!