I have fabbed up several flatscreen mounting brackets for customers in the day job. For what you need, I would got to a local steel whole seller, get a piece of 12 gauge flat sheet steel just about a 1" wider and taller than the mounting holes on the back of the flat screen. Drill the mounting holes into the steel. Get some metric screws that will give you at least 4 threads when tight. The factory ones are always too short. Then get what's called a mineralac strap or a "mini" from your local electrical parts house that fits your truss. A can of black spray paint and your done. You will need a screw driver to install it, unless you swap out the factory 1/4" x 20 screws with thumb screws. But as alway be aware of the "tip hazard".