LED strobes

To many ads? Support ODJT and see no ads!
jokerswild said:
Yup.... if ya leave all of the dips off except 10... it should run through all of it's programs sequicially.... and all you should have to do is supply sound and adjust the sensitivity knob.....

Max that knob out and put on some hip-hop.... with some bangin' bass and see what ya get.
Click to expand...

I'm at work.... no music. I'm just trying to make it run manually.
 
Papa Deuce said:
OK, I had ONLY switch 9 on, and no lights came on.


I think I am going to send it back and get 2 regular strobes.
Click to expand...

Sounds like ya got a DOA.... is the red indicator light lit? I wouldn't give up on that type of light.... I'd exchange it first then go from there.
 
jokerswild said:
Sounds like ya got a DOA.... is the red indicator light lit? I wouldn't give up on that type of light.... I'd exchange it first then go from there.
Click to expand...

Nope. :sqfrown:
 
Papa, check the fuse ;)
 
Papa Deuce said:
I would have to take the unit apart to get to the fuse. There is no external fuse.... not worth it.
Click to expand...

Look where you put your power cable there is a compartment right there that should just pop off and expose the fuse.

See pic below...
 

Attachments

  • CHFuseCompartment.JPG
    CHFuseCompartment.JPG
    4.1 KB · Views: 56
Rob got it. it's right where you plug the IEC cord. Small flat head screw driver will do the trick.
 
DJ SVO said:
Rob got it. it's right where you plug the IEC cord. Small flat head screw driver will do the trick.
Click to expand...

OK, so I opened it and even changed the fuse. There was a spare. It still wouldn't light up.

Thanks, all!

Oh, and yes, the outlet works. :sqwink:
 
Papa I will be back into the office on Tuesday 8am until 5 give me a call and I will take care of you. I am sorry that this happened and we will make sure that your replacement unit works before we send it out.

If 8-5 does not work let me know what does and i will make sure that I am there for you.

Kat
 
Kat said:
Papa I will be back into the office on Tuesday 8am until 5 give me a call and I will take care of you. I am sorry that this happened and we will make sure that your replacement unit works before we send it out.

If 8-5 does not work let me know what does and i will make sure that I am there for you.

Kat
Click to expand...

Kat, I have ZERO worries about NLFX taking care of their customers. None at all. :sqbiggrin:
 
I have sat here and read this thread tonight and after you getting the wrong light to begin with and THIS happening I'm like well crap! Making sure you are happy is top priority for us and I intend to kep it that way :)

Kat
 
Chuck The DJ said:
Kat, any word on my back oders?
Click to expand...

Chuck -

I logged into the office and it shows still on BO. That seems odd to me, I was sure the clamps in particular had come in by now. I'll make some calls on Tuesday.

Ben

(Sorry, I know you wanted an answer from Kat... she IS better looking)
 
So, the replacement came today and fired right up.... no video, but 1st impressions are that it doesn't stack up evenly with a traditional strobe.. I turned it on in a dimly lit TV studio that must be 1000 SF, though, and the light was hitting every wall, incuding 30' high ceilings.

IMO, it will cover the average dance floor just fine, just maybe not as well as a traditional strobe,
 
You must log in or register to reply here.
Top Bottom
Back