Wireless DMX power question

To many ads? Support ODJT and see no ads!
TinyTim

TinyTim

DJ Extraordinaire
Nov 2, 2017
108
76
38
Good morning y'all!

So I have ordered a pair of Mini Kintas that I plan to mount underneath my speakers. I bought a set of wireless DMX transmitter/receiver and it needs a power source. Can I use an IEC to standard female plug adaptor with the power out port on the Mini Kintas or will I need to run a separate power cable to plug in the DMX gear? Pics of the adapter included for reference.

Thanks in advance for your help guys! Y'all are awesome!


967a574346a83cd23be40dccbd46a900.jpg145ed167442499f295b7eb490fb547e1.jpg

Sent from my XT1650 using Tapatalk
 
Last edited:
The mini kintas have a 3 prong outlet on the back of them so I would think you could just plug the power supply from the wireless receiver into the back of the kinta directly as long as the power to the kinta remains on and control for on/off of the lights is done with DMX.
 
BlueLineDJ said:
The mini kintas have a 3 prong outlet on the back of them so I would think you could just plug the power supply from the wireless receiver into the back of the kinta directly as long as the power to the kinta remains on and control for on/off of the lights is done with DMX.
Click to expand...

Ok. I just ordered the lights two days ago so I don't have them yet and I was seeing conflicting pictures online (some with an IEC out and some with a standard 3 prong out). I guess I will just wait till they get here and take a look at the back of them then.
 
trans.gif
This is the back of mine.
 

Attachments

  • MINI-KINTA-IRC[1].jpg
    MINI-KINTA-IRC[1].jpg
    172.9 KB · Views: 10
  • Like
Reactions: TinyTim
Some ADJ fixtures need those type of connectors for stringing power to each light..
 
  • Like
Reactions: TinyTim
You must log in or register to reply here.
Top Bottom
Back