Trailer Questions

To many ads? Support ODJT and see no ads!

cbarronx23

New DJ
Dec 12, 2006
1,093
0
35
I am now more serious than ever about buying a trailer. I had a gig last night that was the most physically exhausting job I think I ever had, and then loadind up was not fun at all.

I finished the gig at 9:30, packed it all up by 10:15 (by myself), and then by the time I loaded up and found a way to make everything fit, it was 11.

My needs are the following:

  • 6x12
  • Leaf Springs
  • Ramp Door
  • 2 dome lights
  • tie down rails

Now, it there anything I'm missing?


Also, I need to make sure this will hold 4 18" subs, 2 15" 3-ways, 4 15" 2-ways, 2 8 space amp racks, 2 consoles, 2 Global Crank Stands, 4 6 foot sections of truss, wire trunk, 4 scanners, 8 par cans, and some other lights.

Your thoughts?
 
go to home depot and check out the trailers there, it is one thing for us to talk about trailers but you need to find something that you will be comfortable with, pick the brain of a sales associate at one of these stores, also search the boards of the trailer pics for ideas.

Weight all your equipment up and find out if the trailer will support your needed weight.
 
go to home depot and check out the trailers there, it is one thing for us to talk about trailers but you need to find something that you will be comfortable with, pick the brain of a sales associate at one of these stores, also search the boards of the trailer pics for ideas.

Weight all your equipment up and find out if the trailer will support your needed weight.

Home depot is a no-no. The trailers there are all crap. I am looking more towards a Wells Cargo or Haulmark trailer.

Weight doesn't seem to be an issue. My equip in total weighs in around 1350-1400 #.
 
I would add a hitch to the truck but I would not buy a trailer. I rent one from u haul when needed. It's not all of the time you will need to bring out that much gear.

Good idea, but the other issue for me is storage. Right now, everything is in the basement. Everytime I have a job, I need to go up 13 steps with each piece of equipment I have. With a new amp rack on the way, housing 2 PLX-3602's and DR 260, that's just out of the question.
 
Chris : I've utilized a trailer for a considerable length of time and had it custom made by Continental Cargo in Elkhart, IN.

If an order were placed to order a new one today, here's what the "musts" would include:

1) 6' x 8' with dual axles (4 tires);
2) insulated walls, floor box, and ceiling;
3) electric brakes;
4) full sized battery with interior lights running from stand alone battery which is charged when connected to the towing vehicle;
5) drop down ramp style rear door with diamond plate mini-ramps to bridge the distance/gaps (rear gate to street level and separation from rear ramp to interior);
6) auxiliary angled exterior diamond plate tool box attached to trailer fork;
7) possible propane or 12v to 110v heating grids;
8) low profile heavy duty roof vent;
9) l.e.d. brake, turn, and side marker lights;
10) exterior to interior 110v AC receptacles;
11) linoleum covered floors and walls;
12) reinforced ceiling struts to accommodate load shift bars;
13) double bright, double sized, backup lighting;
14) um, that's it for the moment.

There's experienced reasoning for all this, much due especially to the regional needs here (way upstate New York) during the very cold winter months.
 
Get one that is tall enough to store your truss and speaker stands upright, and to place your truss sections over the top of your load. Here is the inside of mine:

WCtrailer3.jpg


When I carry truss I use the top row of E-track to hold crossmembers that the truss can be strapped to. Steel uni-strut works great for that, and for load dividers.
 
Get one that is tall enough to store your truss and speaker stands upright, and to place your truss sections over the top of your load. Here is the inside of mine:

WCtrailer3.jpg


When I carry truss I use the top row of E-track to hold crossmembers that the truss can be strapped to. Steel uni-strut works great for that, and for load dividers.

Mike, what size is that?
 
my experience says go Haulmark before Wells Cargo. unless you get the drop down ramp as the side style doors on the Wells Cargo arent very secure in my opinion. Only one problem with a drop door is space needed when stuck with a very tight loading area.Cap and Mike have given great spec info. Good Luck Kid. (J/K?)
 
As much as I would like to get the options Cap mentioned, I really need to keep cost down. I'll try to get quote with some of those options, and without.

Is the V-Nose an extension to the 6x12, or would it be 6x12 from the back to the tip of the nose?

More importantly, can somebody please tell me whether or not the gear I mentioned previously will all fit in the 6x12?
 
Mike, what size is that?

It's 14' x 7' plus v-nose. Height is 7'. If I ordered another I'd get it 6" taller so a Genie Supertower would clear the doorway upright. As it is it's about an inch too low.

I ordered that size, as well as the in/out fender wells because I figured that was the largest trailer that I could unhitch and park in a standard sized parking space with minimal clearance.
 
Mike, do you think it would hold 4 18" subs, 2 15" 3-ways, 4 15" 2-ways, 2 8 space amp racks, 2 consoles, 2 Global Crank Stands, 4 6 foot sections of truss, wire trunk, 4 scanners, 8 par cans, and some other lights?
 
Mike, do you think it would hold 4 18" subs, 2 15" 3-ways, 4 15" 2-ways, 2 8 space amp racks, 2 consoles, 2 Global Crank Stands, 4 6 foot sections of truss, wire trunk, 4 scanners, 8 par cans, and some other lights?

You could probably get all that in a 6x12, but would have to plan the load carefully. The truss would be the sticky (pun) issue, and getting extra height would help you there.

You are also talking about a substantial amount of weight. You'll want a tandem axle trailer with brakes, and the tow vehicle and hitch will have to be adequate.

Here are some photos of my trailer being loaded for a gig. No truss or lighting for this one, although there was room left. This was DJ gear for 2 large ballrooms plus PA and stage monitors for a live band:

http://audiopyle.com/loadup1.jpg
http://audiopyle.com/loadup2.jpg
http://audiopyle.com/loadup3.jpg
 
You could probably get all that in a 6x12, but would have to plan the load carefully. The truss would be the sticky (pun) issue, and getting extra height would help you there.

You are also talking about a substantial amount of weight. You'll want a tandem axle trailer with brakes, and the tow vehicle and hitch will have to be adequate.

Here are some photos of my trailer being loaded for a gig. No truss or lighting for this one, although there was room left. This was DJ gear for 2 large ballrooms plus PA and stage monitors for a live band:

http://audiopyle.com/loadup1.jpg
http://audiopyle.com/loadup2.jpg
http://audiopyle.com/loadup3.jpg


Do they offer extra high ceilings on a 6x12, or am I stuck with a 6 foot ceiling?

The vehivle pulling it will be a Chrverolet Suburban, and I guess I'd be able to put some other stuff I could keep inside my house in it, such as the lights. I really just NEED to fit the speakers, racks, and trussing in the trailer, and I guess the lights, projectors and screens, and my computers could ride with me and the roadies in the truck.
 
Mike, do you think it would hold 4 18" subs, 2 15" 3-ways, 4 15" 2-ways, 2 8 space amp racks, 2 consoles, 2 Global Crank Stands, 4 6 foot sections of truss, wire trunk, 4 scanners, 8 par cans, and some other lights?


A novel idea.

Place all your gear in your garage and arrange it together just as you might arrange it inside your trailer. Then measure how much room your gear takes up.

There's your answer.
 
As much as I would like to get the options Cap mentioned, I really need to keep cost down. I'll try to get quote with some of those options, and without.

Is the V-Nose an extension to the 6x12, or would it be 6x12 from the back to the tip of the nose?

More importantly, can somebody please tell me whether or not the gear I mentioned previously will all fit in the 6x12?

As HiDef mentioned -- tape out a 6x12 (or whatever size you want) rectangle on the garage floor and see if you can get everything in.

One thing to keep in mind is that you MAY want to leave a channel down the middle so you can get towards the front of the trailer without pulling everything behind it out.