External HD doesn't appear

To many ads? Support ODJT and see no ads!

Bill Kexel

Well-Known DJ
Dec 5, 2006
2,097
59
65
Phoenix, AZ
I have an external 80 gig HD (Western digital) It plugs into a USB port.
I have been using it as a backup with no problems. I have about 8,000 songs on it.

Suddenly, every computer I have tried it on will not acknowledge that it exists when it's plugged in.

Anyone have any ideas on how I can fix it?

Thank you,

Bill
 
If Windows beeps, it means it found it -- possibly can't read it though.

The read/write head might be stuck (that happens often).

Unplug it from the computer and power source, and drop it on the floor.

Seriously, if it is a stuck R/W head, that should unstick it.
Done it many times, with a great success rate.
 
Is the noise the same as usual?? I had something similar happen with my Maxtor, it would turn on and it did spin but the noise it produced was lower than before. It was done. Maxtor replaced it under warranty.
 
Most of those are stuck head problems.

Remember how much the drive is rated for Gs, when on, and off.


I've been in this business of computers for a long, long time...

Unless the drive had an untimely death due to an electrical short (unlikely), or you hosed it with some software, it is probably a stuck head, as it is still spinning.

Drop it!
 
this happened to me too. I had a WD and, although windows "found" it, nothing appeared.

I used "GetDataBack NTFS" and that sure found it. I backed everything up and formatted. This solved the problem!

You may want to check it out.


Also, there was a problem with the chip in my enclosure (diff HD) and it seems many have been having this problem lately. May want to check that out as well, but usually a message would pop up asking for a driver that doesnt really exist.


hope it all works out.

I believe GetDataBack would be best. I bet you have another 80GB HD laying around somewhere.




rlelek
 
Try this, but do exactly as I say...

Go to my computer icon and right click, select manage, click on Disk Management under the Storage Drop Down, expand the window as necessary.

Screen shot the results (Alt+Print Screen) then paste in photoshop or microsoft paint, then upload to here.
 
Try this, but do exactly as I say...

Go to my computer icon and right click, select manage, click on Disk Management under the Storage Drop Down, expand the window as necessary.

Screen shot the results (Alt+Print Screen) then paste in photoshop or microsoft paint, then upload to here.

Okay, I got to that screen, but pressing "alt" and "print screen" ...nothing happens.

Thank you,

Bill
 
Unplug it from the computer and power source, and drop it on the floor.

Seriously, if it is a stuck R/W head, that should unstick it.
Done it many times, with a great success rate.

Nearly ripped something reading that Rick, still laughing...

Don't forget to do that just prior to the gig to make sure it starts properly...
Concrete works better than wood btw...

oooh the looks you'll get...
 
Nearly ripped something reading that Rick, still laughing...

Never could understand why people are taken aback by that... :sqconfused:


I've been building, programming, and generally working on computers my whole adult life, and we've always done it.

The g force, and drop force a drive can handle, far exceeds dropping them on the floor. The rest of the computer may not handle it, but the drive surely will.

Modern drives auto park their heads in the safe zone when they power down, so, if the head gets stuck due to condensation, lubrication issues, etc., dropping them will do no damage to the data on the platters.

So, you guys can laugh all you want, but me and the Fonz know how to make things work :sqwink: :sqbiggrin:
 
Praise the loarda I believe brudda!

It was just funny to read that chiropractic adjustments work on arthritic drives.
My only concern would be that the head didn't park properly on the last close.
 
darn....i really wanted you to drop it so we could find out the results.

i love when low tech solutions work.