A Cheap Idea

To many ads? Support ODJT and see no ads!

rlelek

New DJ
Oct 8, 2006
539
1
34
San Francisco, CA
www.ryanlelek.com
Okay, I have just stumbled over a new and crafty idea. Have you ever wondered how to get your name displayed at a party without the common banner??? A new and different way that IMO doesn't look tacky or just thrown together??? Well kids, It's time to dust off that old projector. Yes, that same projector that many people have out on their lawns that make people say, "Oh look Honey, They just had a baby boy!" This could also be the same one that you "found" after a wild party or the one that just "appeared" on your doorstep. Anyway, there is quite an inexpensive way to customize these projectors!!! Though I have yet to try, I believe this should work. I was at a wholesale, open to public store and I came across a NON SPINNING image projector for only $10. That REALLY sparked my imagination. I was looking at par cans at the time, but this gave me a better idea. Par cans cannot display a logo, but projectors can. Why not buy some projectors, use them as par cans, and create a custom slide with your logo??? It seems easy enough.... So after some previous thought on a creative, new, and inexpensive way for people to remember me, I think i finally figured it out. Here is my plan.....

1. Buy 2 still image projectors at @ldi food corporation for $10

2. Buy some OVERHEAD PROJECTOR paper at officem@x to print a logo on

3. Print logo on to desired size, cut out, and frame with homemade Image slide

4. Place inside the projector

5. Focus until clear

6. Enjoy the simple work that gave your business a new and creative twist.

I hope this works for everyone as I have yet to try it. Obviously, projectors are NOT that bright, but, for $10, it should get the job done on an average lighted dance floor. Also, You can use your copilot to flash them as if they were par cans. I am planning to try this out in the next week, but if you have any success/problems please post them here. I, once again, wish all of you luck. Sometimes things are so simple, they are difficult.

^^^I hope this isn't one of those.^^^

rlelek
 
not sure what projector you are talking about but if I saw a likeness id get it. This sounds like a cool idea for minimum money!!! Good thinkin Linkin!!
 
ed, it is just those projectors that sit outside on lawns. the ones that say "happy Halloween" or "Merry Christmas." Just those simple little STILL image projectors. I'm sure you can find them pretty much anywhere because of the holiday season coming up.
 
thats a killer idea
you could even shine them on the side walls on the dance floor if you wanted.
 
exactly...it was more meant for a background image or to be on the dancefloor. I think the side would be better though. when people start to dance, you wouldn't see it and they probably wouldn't appreciate the light in their eyes.

*do what ed said if you make this. Side walls or even like how i will do (background. projector hung on truss)
 
Thats an awesome idea Relek
 
This has been discussed...

Your post shows you're thinking...

If you can get your idea to work, let us ALL know. I'm sure many would like to try it... but... these projectors do not have a very bright lamp...

Many months ago, several of us were talking about this idea on another board. Here's what we came up with... Most projectors require the image to be too close to the lamp, and you'll melt the transparency sheets if you try it. You NEED glass or metal gobos.

If you adapted an "overhead projector", you could get it to work with transparency paper if it wasn't too bulky to set up.

Martin used to produce a fixture called the "Image Scan" that allowed the user to use 35mm slides or transparencies... and are still available on e-bay for around $500 (there is one listed right now with a controller for $900).

Another suggestion was to use a video projector and "Powerpoint" to create the image or logo. Obviously this is very expensive, but VERY effective and there is no further cost and you can change them within moments..

I just bought a new Chauvet ZX30RG "gobo" projector for $69 on e-bay that has replacable gobos (25mm). It still requires a glass or metal gobo. I already ordered a custom gobo of my logo from Centerstage (Appolo brand) for $110. This projector also allows the gobo to spin and the mirror head is removable, so you can use the fixture as a simple projector.
 
Light spill?

If you adapted an "overhead projector", you could get it to work with transparency paper if it wasn't too bulky to set up.

Another problem with an overhead may be light pollution. The fresnel on the stage directs the light to the mirror and optic but there is a fair amount of spill. If you have a show or scene with very carefully balanced color all that white light may play havoc with your effect.

Just a thought.
 
Yep...

That's what prompted my "adapted" comment. You'd need construct some sort of a tunnel cone to go over the distance from the glass plate surface, up to the lens. That would block out much of the "spill" over light. I think it would look amateurish, however.

There really isn't any "cheap" way to do this... I opted for the cheapest I could find... My projector and gobo was about $190 for everything for a 150 watt image. Not too bad in my book.

Those "holiday" projectors just don't have enough wattage to make an image stand out at a gig.
 
Eklondon... no, but that's also a good idea...

An overhead, is basiclly a light table with the mirror & lenses that are clamped about a foot over the table and image.

A slide projector may be what the first poster was talking about... if you made a transperancy to fit into a frame, it might work... I'd like to know how well. Again, I'm not sure if it would be bright enough... LET us know.
 
Light spill and slide projectors

Yes, I getcha Tyrone.

Many of the less expensive overheads use a plastic fresnel lens. Having cool air circulate above the stage might be part of the plan in at least some of the designs. But you know, some dark felt and velco might be just the ticket for that idea.

Sorry about missing that you covered the light spill Tyrone, if it was any closer it would have bit me.

The projector depicted above by eklondon is what we used to call a carousel or 2X2, the slides being 2X2 inches. They were marketed under many names. Kodak called the professional version an Ektagraphic.

You could leave slides up for very long periods of time. The advantage being that you can cover the crowd in cool pictures just like they did in the 60's. It will not be nearly as bright as the newer effects however. Many of the Kodak models allowed the slides to cycle automatically.

BTW: Tyrone? Do you play music too? How do you find the time?
 
To answer your question....

I'd be happy to answer your question....wait a second while I flip this record over.... Now what was the question again?

I don't really do anything except on Friday and Saturday night. Otherwise, I spend most of my time sitting here, or out in the garage...but it's real cold outside right now.

My newest project is to install a video security system. I bought this "hidden" camera that looks just like an outdoor spot light. Works pretty good too.

I have too many projects....