Complete review on Revo Roller & Scanner...

To many ads? Support ODJT and see no ads!
G

Guest

Guest
I'm ready to make a purchase, and was wondering if anyone here has a review on either of these two units. I'm told that the beam is only 12 watts, but is as bright as a 250 bulb. I'd be happy with even 150 if it's true. Can anyone tell me anything about these?.

Absent any information, I'll order two and give you all feedback when I discover it.
 

Attachments

  • Revo Roll LED.jpg
    Revo Roll LED.jpg
    29.5 KB · Views: 3
  • revo scan led.jpg
    revo scan led.jpg
    26.1 KB · Views: 2
I have two fixtures on the way...

I will be receiving one Roller and one Scanner on Thursday. I will them give them a complete workout and post the results.

American DJ is "loaning" me two new units (through Mitch at Centerstage Lighting) to test and review. I was told to be totally honest regarding these fixtures. Since these are new technology in scanners, I'm looking forward to test them out.

I have a favor to ask all of you... what aspects of a fixture are important to you? I will try to be as through as possible, but might not cover everything. Please let me know what's important to you. This could also be the start of a "review" relationship with ADJ.
 
I would thing that the one with the barel roler might be a bit more exciting... with a lot more movement. Im very interested in reading your review...

THANK YOU
 
You might be correct Steve...

I watched a video of the fixture and it looked impressive. I didn't think it color mixed, but I could be wrong. Again, by looking at the location where the beam is projected instead of at the fixture itself, might answer that question.

I am going to assume that each beam is highlighted through smoke, rather than color mixing all of the beams... we'll know in a few days. I'd have to say that the price is exactly in everyone's price range for a fixture of this type. Just look at all of the other barrel mirror fixtures out there now.
 
brightness is important Tyrone,,,,,,, with so many rooms not allowing smoke or haze,,,, it needs to be bright to have an effect...

Also, construction, how well is it made? "roadworthyness"

I like having a cover over the mirror on my scanners to protect them while in transport.

EASE of use!!! How do they do without DMX.....

I know that you are the DMX God, but some of us still like the ease of sound activated mode.

I agree with the color aspect of all LED fixtures, but the lightweight and low power comsumption to me make up for it....

my 2 coconuts...
 
I just got a knock on my door...

UPS just delivered both units... I'll play with them in the kitchen for a while. The real test will be at a gig...
 
My initial reactions...

I played with the "Scan" first and it wasn't something I'd buy, but here goes. The instruction book was lacking (who'd have guessed). The unit was said to "automatically" go into sound active mode , it didn't... I had to put it into "Master" mode, in order to get the sound to activate it.

The manual mentioned "stand alone" mode, but didn't tell you how to set it to get there. And, a real problem for beginners is the display. The instruction manual gave you images of what each mode should look like on the display, but that's not what they looked like. A simple re-write would fix the manual.

I then started to play with the "Roll"...Damn, what a difference. I really liked it, and plan on purchasing two when I'm done with this review. It acted MUCH more like a barrel scanner. Keep in mind, that these units are not "true" scanners. They are "Moon flower" effects with X / Y axis mirrors.

Neither unit was able to RGB color mix (like an LED par can), but the effect was very nice. Also, unless you have some smoke in the air, or a surface for the unit to shine on, the effect is remarkably reduced. The LED patterns were similar to a Vue I or a Revo I. The "Roller" multiplied this pattern and made it look much more like a III that moved.

Both units are 4 channel, and could not color mix, nor utilize gobos. There is a "strobe" feature on both, but due to LED function, you can't dim either unit.

For a beginner DJ, I'd go with the Roll first, for the same price as the Scan. The price is in the right ballpark for a metal housing, very light weight unit. There was no protection cover for the mirrors, which disappointed me. I liked the fact that each unit could stand by itself on a flat surface (be careful not to tip it over however).

I will be writing a much more detailed review in a day or two, after I use them at a gig. Here's a video of the Roll.

YouTube - Revo Roll
 
hmm not bad for what it is. I also like the patter better than the Vues .I always get flashbacks of the Pachinko Parlors in Japan.
 
Video from tonight's gig...

I had a gig tonight for a group of nurses. I had a boo boo on my hoo hoo, and got lots of attention... Anyway, I shot some video before everyone arrived, of the Revo on the balcony.

This was in one of our big cabins (16 bedrooms) with a big great room and balcony. I'm very pleased with the performance of this fixture. I don't think the output is equal to a 250 watt bulb, but it was very acceptable for the price range. As I mentioned earlier, you MUST have a little smoke in the air for a good visual.

I think two of these would make a great addition to any light rig. BTW, everything shown is in sound active mode, including the Wiedamark cans.

YouTube - Revo Roll at gig 1

YouTube - Revo Roll 2 at gig
 
Tyrone shoot some pics of the pattern on the floor. all lights look mostly the same shooting straight in your face?
 
It didn't seem that bright...

I put it at 150 watts if I was to venture a guess. Remember, we're talking about LEDs here. I also guess that as technology advances, so will the brightness of the LEDs.

I'm putting a complete review together today.
 
Revo Roll & Revo Scan Review...

Packaging was excellent. There was a large piece of foam at either end of the unit, so that there was 3 inches of space around the unit inside the box. One of my boxes had a gouge in it that didn't affect the fixture at all.

When I removed them from the box, I was amazed at the light weight. The case was extruded metal construction and felt very sturdy for being so light. I wished they had been equiped with mirror covers... I suspect mirrors will get broken in mobile applications without protection.

Both units will stand on a flat surface without concern for fans or cords, since the controls and power cord come out of the top. A base support of some kind might be necessary if there was a desire to use them on a table or speaker, for example. The footprint was small, and knocking it over might be an issue if used this way. The mounting bracket was very small on the back, but was adiquate for most applications.

The instruction book was lacking. The unit was said to "automatically" go into sound active mode , it didn't at first... but then I discovered that there was a cycle period... and THEN it activated. It took about 30 seconds, so hooking it to a co-pilot was out of the question for a quick start.

In order to use either fixture without a DMX signal, you HAVE to purchase a push button remote for "On" or "Off" of the LEDS. I left the unit "On" all night (no cycle period) and it was just fine.

One problem was the display didn't match the manual for each mode. The instruction manual gave you images of what each mode should look like on the display, but that's not what they looked like. A simple re-write would fix the manual. I was impressed at the modes available. You chould swap pan and tilt to be 180 degrees out with the master, "stand alone" "master/slave" etc... very cool.

I activated the Scan and watched all of the patterns. It functioned well and moved nicely. The stepper motor was smooth and had lots of range. I liked the patterns.

I then started to play with the "Roll"... what a difference. It acted MUCH more like a barrel scanner. Keep in mind, that these units are not "true" scanners. They are "Moon flower" effects with X / Y axis mirrors.

Neither unit was able to RGB color mix (like an LED par can), but the effect was very nice anyhow. The display was just like the Revo series fixtures. And, unless you have some smoke in the air, or a surface for the unit to shine on, the effect is remarkably reduced. The LED patterns were similar to a Revo I. The "Roll" fixture multiplied this pattern via the barrel mirror, and made it look much more like a Revo III that moved. Again, very cool.

Both units are 4 channel, and neither could color mix, or utilize gobos. There is a "strobe" feature on both. Due to LED function, you can't dim either unit, and I don't think you'd want to. The claim of 250 watts wasn't realistic. I'd estimate 150 watts from it's beam appearance.

For a beginner DJ, these units are a great way to begin your DMX carreer, or add a few to you current show. Used either with the push button controller, or DMX controller , these are "nice" units for the price (maybe a "few" dollars too high).

YouTube - Revo Roll

YouTube - Revo Roll at gig 1

YouTube - Revo Roll 2 at gig