To Long Setup And Tear Down Help Please !!

To many ads? Support ODJT and see no ads!
I am in North Central West Virginia half way between Pittsburgh, Pa. and Charleston,WV...My best Gigs come from Kevin Colangelo..I only know of one Very Interactive DJ Company within a 50 Mile Radius that gets $1,000 for a Wedding...As bad as it is it still beats by a mile what I used to make in Radio.
 
I am in North Central West Virginia half way between Pittsburgh, Pa. and Charleston,WV...My best Gigs come from Kevin Colangelo..I only know of one Very Interactive DJ Company within a 50 Mile Radius that gets $1,000 for a Wedding...As bad as it is it still beats by a mile what I used to make in Radio.

Don -

It sounds like you are very near the Mineral Wells area - perhaps even closer to Bridgeport.
 
Ok, Jim. My set up takes 8-10 minutes as well for a non wedding. That is if I'm using 1 L1 and 2B2s, no facade...

Weddings are much different. More set up to look great!


Ummm...no. I use the same sytem, just add speakers wirelessly if I need them (an extra 3-5 minutes setup)

And I use my systems for up to 350.

I think some of you guys overthink it.
 
My party and wedding setup with no extras takes 20 to 25 min to setup and 15 min to tear down.

Everything is pre-setup the only wires I connect are 3 speaker wires 2 mains and Sub and a power wire, and the mixer case xlrs to the crossover in the amp case.

I can use bigger setups but they don't take much more time unless I get into Big lighting setups. Video ads about 10 more min.

Load in will vary but with a cart it doesn't take long.
 
I've worked at a location where the venue mgr would give you 30 min to tear down & get out. If not,he would turn off the lights on you & tell you to come back the next day & get your stuff.

I went out of my way to decline events at that location.

...... But I hate being rushed.


I've had this happen. I just told them no problem, but I need a $5,000.00 cash deposit for the equipment. Problem solved.
 
Ummm...no. I use the same sytem, just add speakers wirelessly if I need them (an extra 3-5 minutes setup)

And I use my systems for up to 350.

I think some of you guys overthink it.

Chalk my experiences up to poor planning when getting back in the game.

Hopefully by next year, the set-up and tear-down time should be drastically reduced.

Excellent point.
 
Jim, how many 4a's do you use for a 350 person wedding?

I use only 4.

They are mainly used until the open dancing begins, then the sound is concentrated to the dance floor. I keep independent control of the two back ones for any announcements.
 
Correct...I've only used two since 1997.

Some vendors love me specifically because I have a quick setup and tear down (and I supposedly know my music)
 
I own two pair of 4a's myself and before I got my RCF 705 subs, I would only use one pair of 4a's at the largest of weddings. Also with no complaints and plenty of referals... I do sound better now though as I use one sub for larger weddings.:) I normally keep the sub off for cocktails and dinner, otherwise I get too many complaints from the older people...:(