Vocopro CDG 8000 Question

To many ads? Support ODJT and see no ads!

DJ Gray

New DJ
Oct 25, 2006
2,099
2
18
Anyone who has this CD CD+G player (Vocopro CDG 8000). On the back panel there are "switched Out Deck #1 & #2" Audio & Video jacks. How do these operate, and which inputs in the Mixer do you plug them into.....CD #1? Do these jacks on the 8000 automatically select which player is active and send that singnal through to the Mixer?:sqconfused:

I would really appreciate some info..I'm about ready to fire up my new Karaoke Rig...
 
The only thing I use the switched outs for is video. That way, both trays will show graphics on the TV without the need for an external switch box. But if you're playing a song in deck 1, you have to eject it before the graphics for deck 2 are visable on the screen.

I use the audio outs on each side (not the switched audio) and give them their own channel on my mixer, so I can have continous music.

I tried to find a pic, but Vocopro's website sucks. :sqmad:
 
The only thing I use the switched outs for is video. That way, both trays will show graphics on the TV without the need for an external switch box. But if you're playing a song in deck 1, you have to eject it before the graphics for deck 2 are visable on the screen.

I use the audio outs on each side (not the switched audio) and give them their own channel on my mixer, so I can have continous music.

I tried to find a pic, but Vocopro's website sucks. :sqmad:
Thank You........Jay I can't wait to fire this up with my Vocopro 7800 Mixer.
 
I found a pic on ebay. Forgive my messy writing.

DIAGRAM.jpg

I got that set up correctly thank you........however I've some other problems I assume the Mixer....It will only play one side either left or right speaker at once cannot handle both Left and Right Master outs at once?...I'm using the XLR Balanced out jacks on the back directly to my JBL Eon 15" Powered Speakers.I first tested, I Removed the audio cable from one speaker to the other and it worked, not speaker problem. Switched from L XLR master out to right XLR Channel out... Right, Channel Worked. Did the same switching cables. So....Speakers and cables and Left & Right master outs checked out. Both CD Player 1 & 2 worked fine crossfader works fine....however I cannot run both speakers at once? This is puzzling.......Any help? :tbaffled:
 
It's gotta be a setting on the mixer. Unfortunately, Vocopro doesn't have downloadable manuals on their website, so you're on your own with this one. That is unless someone else is familiar with that mixer.

Did you buy it locally? If so, talk to your dealer. Even many of the mail order dealers will help you out over the phone.

If you bought it on ebay, your pretty much screwed. :sqembarrassed:
 
Could you take a pic of your mixer and post it? Maybe if we could get a good look at it, we could help you figure it out. I was just on Vocopro's site and the pic is too small to really make anything out.
 
Could you take a pic of your mixer and post it? Maybe if we could get a good look at it, we could help you figure it out. I was just on Vocopro's site and the pic is too small to really make anything out.

I don't know how to insert the picture?
 
When you make a post, at the bottom, it says "manage attachments". You'll see buttons that say "browse". Find the file on your computer and then hit "upload".
 
I found a manual at KaraokeWH.com!!! :sqbiggrin:

Next to your crossfader are two buttons (one on each side) that say "assign 1-2" & "assign 3-4". Push those, and make sure that both master faders are turned up.

Let me know if that worked.
 
I found a manual at KaraokeWH.com!!! :sqbiggrin:

Next to your crossfader are two buttons (one on each side) that say "assign 1-2" & "assign 3-4". Push those, and make sure that both master faders are turned up.

Let me know if that worked.

I had the left one assigned to #1 and the right one assigned to # 2. When you say "Master Faders" what do you mean? When I'm on CD #1 I bring #1 Fader Up, I even tried bringing both #1 and #2 up when I had my crossfader to the left assignment #1, and vica versa with cd Player #2. Is that what you mean?
 

Attachments

  • 107-0788_img.jpg
    107-0788_img.jpg
    25.9 KB · Views: 2
  • 107-0786_img.jpg
    107-0786_img.jpg
    35.8 KB · Views: 1
I got it it was the L and R Masters out that were not both activated. I'm gonna have to get rid of some speaker hum.....Don't have that problem with the DJ Rig using the same speakers, Power Conditioner and crossover only difference is CD Player and Mixer But glad to have this done Thanks for all your help Jay......:happy6: