DJ Facades ...Keep Falling Over?

To many ads? Support ODJT and see no ads!

DJ Gray

New DJ
Oct 25, 2006
2,099
2
18
(Mod if this is wrong forum please move)
Has anyone found a way to support the DJ Facades, and keep them from falling over?. I have one of the Odyssey 4 ft' high X 6 wide Facades and it is not good standing up through a show. Anyone added supports...if so where?, what type?

Appreciate your help...........
 
I have one thats 4ft high 6ft wide and 2ft deep It's made out of 3/4inch plywood so it ain't goin' no where. It was built to take being leaned on. It wraps snugly around the racks and table so there is no play.
 
I think mine is only about 3/8" plywood, and is not that sturdy, though easier to lug around............
 
I have this thing about theft, if you make it heavy enough there is less likelyhood it will get stolen. Everything I have is in 3/4'' wood racks and cases, and speakers are full size cabinets at about 80pounds apiece. If a thief is going to take it he's gonna have to work for it! Cheap insurance and I get a workout!
 
i have the topper...lightweight and same challenges....
i use 4 clamps....2 clamps on the ends...and then 2 clamps clamp those clamps to the table...works great.
 
i have the topper...lightweight and same challenges....
i use 4 clamps....2 clamps on the ends...and then 2 clamps clamp those clamps to the table...works great.

LOL Scott I hate to say it but our setup is going to look a like I also have the topper on my 6 foot black skirted table. When I get my bose our set up will probably look alike. You don't have any pictures for me to dream of do you. While I wait. :sqbiggrin: Also spark the topper is great you can use in on a 4 foot table up to and 8 foot table i believe. I would also like to see how you clamp it down.
 
I will use angle tacking it to the bottoms
then it will have a balance and no way to fall over. I built my own 6 footer but see the need to resize at the moment.
 
Few years ago we had one of those Odyssey foldup facade stands that would wobble about something awful. No floor is perfectly level nor square.

We solved the wobble and walking around by installing a set of plastic feet to the bottom. The feet raised the boards just enough so they weren't flat on the floor.

It's sad that these things don't come with the feet already installed.
 
I like the angle iron idea, and the feet. Both might work well together. One for letting it lean back on the angle iron, the other, the feet to keep it above any wires, etc which may beneath the facade. Great idea's thanks.....
 
I like the angle iron idea, and the feet. Both might work well together. One for letting it lean back on the angle iron, the other, the feet to keep it above any wires, etc which may beneath the facade. Great idea's thanks.....


Or, you just intermittently put the angle iron... and you can still get wires under it...
 
Or, you just intermittently put the angle iron... and you can still get wires under it...

Exactly!!!...sometimes when you have either a stage monitor, or TV monitor you will have wires going in front of unit,,,,,this will solve it. I have carpet under my rig, (it's on wheels)...keeps rig from moving, then I have the cables/wires on top of carpet. Carpet is nice on the feet....when you stand all night.
 
I have this thing about theft, if you make it heavy enough there is less likelyhood it will get stolen. Everything I have is in 3/4'' wood racks and cases, and speakers are full size cabinets at about 80pounds apiece. If a thief is going to take it he's gonna have to work for it! Cheap insurance and I get a workout!

Doug,

I have to commend you on your post!

Most other post's involve buying smaller, lighter, easier to move gear.

Then a couple weeks later, You see posts titled like "My pants don't fit"

"I tipped over, and now i need triple by-pass" , "This year, i'm sticking with my diet"

It's really great to see someone doing a bit more work, for the security of his gear, and for the security of your health.

Congrats
 
Doug,

I have to commend you on your post!

Most other post's involve buying smaller, lighter, easier to move gear.

Then a couple weeks later, You see posts titled like "My pants don't fit"

"I tipped over, and now i need triple by-pass" , "This year, i'm sticking with my diet"

It's really great to see someone doing a bit more work, for the security of his gear, and for the security of your health.

Congrats

I think for you younger fella's that's great......I still lift weights at 61, exercise and stay in shape........but I see no reason to abuse my body if I don't have to....just one of those "Life Lessons Learned".....
 
I think for you younger fella's that's great......I still lift weights at 61, exercise and stay in shape........but I see no reason to abuse my body if I don't have to....just one of those "Life Lessons Learned".....

I'm with you Gray. I'm 45, and by no means "old", though I did have my heart attack. Yeah, I'm fat, but I always worked out cardiac wise. Weights, eh, not so much...

But when you work bad hours like I do, have young twins, get very little sleep ( and no, there isn't much I can do about that as long as my kids are young and I want to stay employed ), I look for ways to lighten the load.
 
Security until you get my age then you need health care only Canada provides to provide medical treatment for my worn out back.
 
Looking for a certain type of facade

I've been looking to buy a “pipe and drape” facade, and finally found a manufactuer. They make exactly what I've been looking for, except the only thing I don't like is the material that that the "drape" is made out of because it looks glossy (shiny). I'd rather have it look flat.
You can see the one I'm talking about at DJSKIRTS.COM. Does anyone else know where I can find what I'm looking for.
 
LOL Scott I hate to say it but our setup is going to look a like I also have the topper on my 6 foot black skirted table. When I get my bose our set up will probably look alike. You don't have any pictures for me to dream of do you. While I wait. :sqbiggrin: Also spark the topper is great you can use in on a 4 foot table up to and 8 foot table i believe. I would also like to see how you clamp it down.

I would also appreciate some pics of your setup for the facade, Scott

View attachment 4113

View attachment 4114

i will take a pic of the clamps on it this weekend.
 

Attachments

  • americanentertainment.jpg
    americanentertainment.jpg
    21.2 KB · Views: 1
  • clamp.jpg
    clamp.jpg
    23.5 KB · Views: 2