FBT vs. RCF?

To many ads? Support ODJT and see no ads!
Steve Maestro is right... set 'em on the floor and you'll have the coupling effect for warmer lows response.

As far as a 12" cab versus a 10" cab versus a 15" cab, sensitivity and tone response are due to cabinet design, not necessarily driver size. Where the cabs are placed makes a big difference as well.

This is something I've scritched my old, gray head about many a time. Folks invest in 15" three-way cabs, place 'em on stands, drive 'em full range and wonder why they don't get bass warmth. :)
 
Why did you get rid of them?
I sort of got real sick in the past couple of years, especially the past 12 months.

I kept one of the FBT Maxx 2A's and have it hooked up to my satellite dish receiver in my office.

Gonna rattle some windows!
 
...I just can't see a 10" powered box out doing a 12" powered box. But then again, that's exactly what the FBT 4a did to the JBL G2... Mike Pyle, can you shoot-out the two speakers in your store?

The 12"s will beat the 10"s. Just in terms of output, they are about the same, and used with a sub the ART310 will keep up fine. But used alone the 10" has little thump. You can eq it to add some bass for small parties, but that will not be satisfactory for louder use.

The RCF ART312a and the Maxx4a are a good comparison. With no eq the RCF sounds flatter. The FBT has a slight smiley face in the sound. The output spl is very close, although I think the RCF sounds smoother when you hit the limiters, probably because the low frequency in the FBT limits before the highs.
 
The FBT's 6a do have nice warm sound to them. They sound nice with a powered 15" sub. I like the way my 325's sound for the cost. I looked at FBT's before I purchased my RCF's, but my main concern was how hard it would be to get them serviced in the States.
 
I may try this trick with 2A's on stands and 4A's on the floor..I love my FBT's..But bought them at a pretty good discount from NS&L in Pittsburgh which no longer carries them..I have a double BOSE system too so am not looking to buy any more Speakers anytime soon..Not looking to sell any either.
 
From my standpoint,Two Reasons: First-I already own both Two 2A's and Two 4A's and Second- Weight..Add to that the fact Overall I don't play that Much Hip-Hop and Bass Heavy Music..This is also why the Bass from The BOSE B1's is more than plenty for me..If my Gigs were to a larger degree Hip-Hop,Then I might say something else.
 
From your stand point, I can see what you're saying.. you allready own the speakers and with the non demand of heavy bass music.... But if you didn't have equipment allready, and you had larger crowds to play for, you would need more thunder (in my opinion).
 
There's truth to this. :)

Sub cabs are used to provide lows warmth. Yup, they come in handy when you need to rattle the dust out of the rafters. Even when you don't need to do that, a sub can fill out your tone with bass warmth that can be heard throughout the house.
 
I consider the Bose 2 L1/4 B1 My "Big System" with Bass Warmth...Any event that I did not deem it sufficient to cover,I would decline and refer it to others more capable..I consider it overkill for many of my events and sometimes use just Two 4A's..Please also keep me in mind I do everything "Totally Solo" and am in my Second Half Century.
 
Spinner, it depends on what type of crowd you play for. Don is just fine to use what he has for weddings. For schools, subs are great but for weddings, a pair of 4a's on the floor with put our bass pretty almost equal to a single 705 sub.

When I use a pair of 4a's to play my jazz recordings through dinner, there is much bass warmth and to be honest, I prefer the sound without my subs. I can raise the speakers up as high as they'll go on the TS-90- Ultimate stands for cocktails in a big room and the full range sound goes everywhere. I find that the guests never complain about it that way either.

If you are a typcial mobile DJ, you would probably get more use out of four good quality powered tops than you would two tops and two subs. Of course, your mileage may very. I do own four FBT 4a's and a pair of RCF Art-705AS subs. I quite often bring one 705 sub with a pair of 4a's but before I had the 705's I would use two in the air and two on the ground with incredible results.

If a mobile has two pair of tops, he can run a pair in another room if needed or for a ceremony or whatever. A sub by itself, on the other hand, sounds brutal for a ceremony! LOL

PS: I have been a bass player for 25 years...
 
You're 100% right Steve. Every crowd is different, as well as DJ's.
As we all know, things vary depending on where we are all located.
Peoples demands are different depending on where you are. The difference in what people want between 2 states that are so close, such as New York & New Jersey can vary drastically. From music format, to elaborate light & video set ups.. to how a DJ would set up for just a basic "music only" job. For example, in New York (the 5 boros), you rarley see a DJ incorporate a table facade in his set up.. where in New Jersey, it's quite common. Music that would be played at alot of Jersey weddings would be considered "cheesey" music compared to what most people would want to hear in N.Y. In some areas, people would consider intelligent lighting and/or video tacky, where in other areas, elegant. Of course peoples tastes vary, I understand that,.. I'm just talking as a whole. Over 90% of our jobs are weddings. A small system for us would be just two powered tops (JBL EONS G2's or FBT 4a's). We would use that for a party of 50 to 75 people. Anything from let's say 75 to 100 people, we would bring a sub into the picture. Our big set ups start with 2 EAW JFX 590's with at least 1 EAW SB 250. Then we take it from there. Don't get me wrong, we have done weddings with 300 plus people that didn't care if we were to bring a clock radio into the hall, (nothing worse than seeing that after you just set up all that sound, lol).
I have a friend who does every job with 2 EON's.. no matter what the size. His attitude (not that I agree with him) is, "They don't care.. just play the songs that they want to hear". He is a single op. so he wants to "get in" & "get out", and collect the $$$. He is right to a certain degree.. the guests are not going to be any where near as crucial on presentation as we DJ's are.. but you also never know if a fellow DJ is going to be one of the guests sitting out there. Me.. I have OCD, lol. I'd rather go out there with more fire power & not need it, than not enough & need it. Again, that's only my opinion.
 
A pair of Eons has its place. I have seen smallish combos ~ pan flute and barbershop quartets at the state fair and street festivals using a pair of Eons with great results. There you have a rather smallish audience as well.

For full range sound in a crowded, noisy venue, a pair of Eons on sticks ain't gonna do. You may get away with a bi-amped rig using the Eons as mid tops and a big honkin' sub with decent processing. But you'd do well to have some serious amp headroom behind it.

You won't have amp headroom with active cabinets, sorry about your luck. :)
 
A pair of Eons has its place. I have seen smallish combos ~ pan flute and barbershop quartets at the state fair and street festivals using a pair of Eons with great results. There you have a rather smallish audience as well.

For full range sound in a crowded, noisy venue, a pair of Eons on sticks ain't gonna do. You may get away with a bi-amped rig using the Eons as mid tops and a big honkin' sub with decent processing. But you'd do well to have some serious amp headroom behind it.

You won't have amp headroom with active cabinets, sorry about your luck. :)

Hey Fred,
Maybe I'm misunderstanding you..
You have more than enough head room with a pair of EON G2's or FBT 4a's with a crowd of only 50 people...
 
Something no one has mentioned is what rates are you charging for various events..I think a client who is paying $1,500. for an event is in a position to be more picky about gear,bass,set-up,appearance,lights,etc. than one who is paying $500..For $500. I'll take the attitude of I'll play the right tunes..Get In..Collect the $$$ and get out...The day I discover I can get $1,000. for a 4 Hour wedding in my market,I'll look at it differently..I've seen DJ's go all out with Big Gear..Heavy Subs..Big Trusses and Intelligent Lighting..Then not able to get the rates desired for all their effort.. and get out of the Biz for something more lucrative..Me,I'll settle for somewhat lower rates to just play the right music..Get in and Get Out..And Have Gigs.
 
Something no one has mentioned is what rates are you charging for various events..I think a client who is paying $1,500. for an event is in a position to be more picky about gear,bass,set-up,appearance,lights,etc. than one who is paying $500..For $500. I'll take the attitude of I'll play the right tunes..Get In..Collect the $$$ and get out...The day I discover I can get $1,000. for a 4 Hour wedding in my market,I'll look at it differently..I've seen DJ's go all out with Big Gear..Heavy Subs..Big Trusses and Intelligent Lighting..Then not able to get the rates desired for all their effort.. and get out of the Biz for something more lucrative..Me,I'll settle for somewhat lower rates to just play the right music..Get in and Get Out..And Have Gigs.

Like I said before.. that's pretty much the same attitude that my pal has. I guess it comes down to that old saying.. "You get what you pay for". If you're charging $500 for a 4 hour wedding, then I can understand your point. I wouldn't go all out either.. To be quite honest, I wouldn't even think about taking the job.
 
I turned down a wedding for October where the groom to be had seen me at a small event where I just used a Fender Passport P-250..He wanted me as a DJ but it also became clear that the couple wanted Big Equipment,Heavy Subs,Intelligent Lighting on a Truss,etc...I declined and referred him to a DJ company that offers these things but he was unwilling to pay the $1,000. quoted rate..He then called a "Friend" who "supposedly" has these things and agreed to do it for $500.
 
Hey Don,
It has to be location then, that's the only thing that I could think of, because over by me, a wedding with music & lights would start at around $2000. A music only job (birthday, engagement, retirement etc. / not a wedding) would start at around $700. That's not to say that a client couldn't get another DJ to do the job for $400, but it would most likely be a kid just breaking into the business.