How's this for $300.00?
Brother Gray,
Leave that cheap-assed Numark stuff alone. If it's onboard effects you want in a pro-grade DJ mixer board, look no further than the Carvin Pro-Mix7:
From the Carvin website:
FEATURES:
• 4 stereo channels for up to 5 line inputs, CD, tape and multiple turntables
• 3 Mic channels for vocals or tape inputs with TALKOVER switch
• Active LO, MID and HI EQ is set at 80, 750 and 11.5K Hz on every channel with special 25 dB cuts on the 4 main channels
• Input GAIN controls preventing overloading is featured on every channel
• 4 segment metering for each main channel, plus 10 segment metering on Master
• A/B crossfader. 256 24-BIT effects with Reverb, Echo, Chorus and Flange is assignable to A/B crossfader, 3 mic/tape channels or bypassed. All parameters are easily changed for rate, damping, decay, depth, time and regeneration
AUX OUTPUTS can be fed to a separate ZONE and to a MONO output, which can also be switched into a SUB WOOFER output utilizing an internal 150 Hz crossover.
A MONITOR control center with its own level controls can be assigned from any of one of the 4 main or 3 MIC channels.
The monitor MIX pan control feeds the MASTER L/R or CUE headphone outputs. Features a powerful headphone amplifier.
INPUTS: 4 main stereo channels feature equalized RIAA PHONO and LINE RCA jacks, 3 MIC channels features balanced XLR’s and 1/4" inputs for Mic, tape & CD’s.
OUTPUTS: L/R master featured balanced XLR connectors and RCA jack along with RCA recording jacks. Headphones, Monitor and Zone outputs featured 1/4" jacks. A ground terminal is provided for turntables.
FREQ RESP: 20 to 20k Hz,
OUTPUT: +28 dBm, THD: .01%, 90 to 250 VAC 50-60 Hz auto switching power supply,
SIZE: 5U rack mount 19" x 8.5" x 3.5" D. Wt 15 lbs.
We've been working with this unit for a few years now and are highly satisfied with it. Every review I have read from folks who have purchased this mixer has been positive. We've had compadres over to play with it who have been working in the DJ biz for more than 20 years. They love it. And they've worked with every DJ board known to man.
The Pro-Mix7 is a DJ mixer that has been engineered and built to touring-grade specs. And it's made right here in the USA.
Check it out here:
http://www.carvin.com/products/single.php?ItemNumber=PRO-MIX7&CID=DJL
Tell you what: Go to Carvin's website and purchase this unit. Upon receipt, set it up and put it through the paces. If you are not 100% satisfied with it I will buy it from you. I am serious. I'll send a company check, shipping cost included. That's how sure I am that you will be impressed with this mixer.
I have included a .pdf file (Acrobat Reader) scan from the engineering sheet that came with it. Hope it helps.