JBL SRX715's

To many ads? Support ODJT and see no ads!
These are the single 15's believe. They are priced at like $300 less than the bigger 725's. If I were you, I would move up to the 725's for that little of a difference. I have heard they are incredibly loud, just as loud as the 725's just not with the extra 15, but if your running subs, who cares. I dont know what the power rating is on those, but i was looking at the 725's and it would need a xti-4000 bridged for each speaker. They are loud yes, but with the amount of power you need to put into these ungodly speakers, it might not be worth it. I have settled for the MRX series, 525's and 518's, they are great. One xti-4000 per each pair...
Josh
 
Pat,

Before you spend the extra cash on SRX's look at Turbosound TXD-151's the turbos are so much clearer for almost hals the price. $499 each.

600 watts at 8 ohms a plx3602 or and 1804 will work just fine.

Or if you want something really sick. I listend to a pair of these just for giggles.


Turbosound TQ-315 About $2000 Each

http://www.turbosound.com/showroom/tq315/index.html

DIMENSIONS (HxWxD)

691mm x 443mm x 381mm (27.2” x 17.4” x 15”)

NET WEIGHT
35.5 kg (78.1 lbs)

COMPONENTS
1 x 15” (381mm) LF driver, 1 x 3” (76mm) diaphragm HF driver on an Converging Elliptical Waveguide™

FREQUENCY RESPONSE1
55Hz - 20kHz ±4dB

NOMINAL DISPERSION2
80°H x 50°V@-6db points. Rotatable waveguide allows swap of horizontal and vertical pattern

POWER HANDLING
Passive: 680 watts r.m.s., 1360 watts program, 1700 watts peak Recommended amplifier 1360 watts @ 8 ohms Bi-amp: LF 600 watts r.m.s., 1200 watts program, 1500 watts peak HF 80 watts r.m.s., 160 watts program, 200 watts peak

SENSITIVITY3
99dB 1 watt @ 1 m

MAXIMUM SPL
130dB continuous4, 136dB peak5

CROSSOVER
Configurable for passive/bi-amp operation with integral rear panel switch. Internal passive crossover at 1k58Hz, 12dB/octave Butterworth

RECOMMENDED CONTROLLERS
Turbosound LMS-D6 BSS Minidrive FDS344

NOMINAL IMPEDANCE
Passive: 8 ohms, Bi-amp LF: 8 ohms, HF: 8 ohms

CONSTRUCTION
15mm (5/8”) birch plywood; rebated, screwed and glued. Finished in black semi-matt textured paint. Three recessed carrying handles. Integral pole mount socket

GRILLE
Powder coated perforated steel with acoustically transparent reticulated foam

CONNECTORS
(2) Neutrik Speakon NL4MP, wired (passive mode) pin1+: positive, pin1-: negative (active mode) pin1+: LF positive, pin1-: LF negative, pin2+: HF positive, pin2-: HF negative


*****1360watts at 8ohms!!!! These speakers will take paint off walls!

They also make a active line of these speakers just under $4000 each.
 
Hey Pat,
My friend owns 2 of the SRX Dual 728 subs and they sound great! I would get 1 of the 728's cause it isnt much more than the single SRX sub. He got his for $1000 each. I think he uses a QSC PLX 1904 bridged mono. I think the sub rocks but the 163llbs is pretty heavy.

-Brian
 
Hey Pat,
My friend owns 2 of the SRX Dual 728 subs and they sound great! I would get 1 of the 728's cause it isnt much more than the single SRX sub. He got his for $1000 each. I think he uses a QSC PLX 1904 bridged mono. I think the sub rocks but the 163llbs is pretty heavy.

-Brian

Brian not bashing just a FYI the closest matcing QSC model is a PLX 1804 the 1804 can not be bridged. It runs 2 channel at 8ohms producing 600 watts per and 900 watts per at 4 ohms.

I know you would do your homework before making any purchase, I just don't want to take the chance of anyone reading a post and buying a PLX 1804 and thinking that it can be bridged.
 
Brian not bashing just a FYI the closest matcing QSC model is a PLX 1804 the 1804 can not be bridged. It runs 2 channel at 8ohms producing 600 watts per and 900 watts per at 4 ohms.

I know you would do your homework before making any purchase, I just don't want to take the chance of anyone reading a post and buying a PLX 1804 and thinking that it can be bridged.

I screwed up :sqembarrassed:
I meant 1804 and messed up on that too.

:(