Equipment: Do you buy all the new fangled stuff right away?

To many ads? Support ODJT and see no ads!
G

Guest

Guest
I used to but when expenses started going through the roof I stopped.

I have been working with the same computer now for the last almost two years. The mixer and mic mixer were bought used off of ebay and have been with me for over a year. The video set up is about a year old now.

Those are the youngest things on my equipment list.

I keep my gear well maintained so that it will last. If what I have is working then I will stick with it.

My philosophy now is, if I don't need it, I don't get it.

If I see a new piece of gear I'll ask, do I need this or do I want this? I'll do that several times and look at what I have. Nine times out of ten, it is want over need so that piece of gear still gets to live at the warehouse of the seller.
 
I buy new stuff if it will bring in more money, make my DJing easier, give me a distinct advantage over the competition in my area...BUT...I have to weigh all those things and then decide.
Years back I too had the "I had to be cutting edge to be better than the next guy" until I finally realised that I was focusing on the gear and not ME.
My computer is 2 years old, Mixer is 3 years old (but I had to replace mine that died of old age)
Diana bought JBL Eon-1500's because they were only 35 pounds.
I just picked up a pair of Bose L-1's to give me a visual advantage over the competition (as well as sounding really nice) that should turn into more refferals.
My CPS program is over 7 years old but it does what I need it to do.
So NO....I no longer buy the next latest greatest just because it's out there.
 
I don't typically buy the "latest greatest" just because it's the "latest greatest".

If I'm in the market for something new, I check out all the options and do a lot of research before I buy. If the "latest greatest" fits the bill, I'll buy it.
 
I only buy when necessary, and when I do, I buy the best I can afford that gives me the longest useful life span.
 
We have a whole pile of old, solid stuff. Latest and greatest is not proven, and generally not of interest until it is. We're more the tried-and-true folk. Like most have mentioned, a new purchase is carefully contemplated and weighed against the other items on the list, and once we decide to purchase, we do a little research into products before making our choice.
 
Hell yea,

I just went out yesterday and purchased some new equipment.

Fancy stuff... called a CD player.

Really neat. cutting edge I hear. No needle, much smaller than vinyl records.

Check it out!
 
Hell yea,

I just went out yesterday and purchased some new equipment.

Fancy stuff... called a CD player.

Really neat. cutting edge I hear. No needle, much smaller than vinyl records.

Check it out!

Theres probably some young MP3 Jocks doing a Google search for that term as we speak :sqconfused:
 
I also buy when and if needed

if I buy new then I say to the client if you want new then its you that has to pay for it in the long run with increased prices

what that saying..... "if it ain't broke, dont fix it"

I always say the same thing
 
My laptop is almost 3 yrs old and my Mackies are over 5 yrs old and still purrrring nicely. Funny you should mention this; I just splurged and purchased a new laptop last night. It wasn't fancy just a basic Dell like my other one. I even stayed with Windows XP.
Besides, I'm saving my money for the exhibit hall goodies in Vegas in Feb...thx
 
I'm kind of on the other side of the fence.

I upgrade constantly. The key is to sell your equipment while its still current and find the right buyer. Basically, to some extent, everything I have is for sale at any given time if I get in touch with the right buyer. If you sell your gear while it is still a current item, you do not stand to lose much at all compared to a major new purchase every 3 years.

That being said, some of my gear is 10 years old...I'm not worried about the latest greatest speakers, but I do like to change up my lighting constantly....Lighting to me seems to age quicker and thus is more important to change up....

Which would you rather buy? 10 year old speaker cabinets that need reconing? Or 10 year old lighting that needs new servo motors?
 
I upgrade from time to time. But only when their is a need for something. Before I buy I will unload some stuff to raise some cash toward the new stuff. It makes the out of pocket less.
As for having to be the first with the latest and greatest. Thats not me. I would rather wait until the product is tested and all of the bugs are gone. I would wait for the first year or two before I buy something new in the market.
 
I feel sorry for all of the folks that could not wait to get their hands on the Iphone. Paying double for it, standing in lines. Not for me. 1st gneration models always have glitches and AT &T's service is not all that good in my opinion.
Back to the thread.
 
I used to buy new stuff but I am at the point in time in my life that if it aint going to make a significant difference in making my job easier, it will not even be considered.

Just like now....
I am designing my next booth/rack. Some of the time Sandy and I can make it in one trip during load out. I want to condense these loads into one load that I can roll in and out. I would like to be able to set up in 10 minutes or less. I am getting WAY too old to do these big setups.
 
I'm extremely picky and dedicated to quality and reliability when purchasing new tools for my system and performance. I'm a believer of the saying "If It's Not Broken - Don't Fix It"... However I'm also a dedicated practitioner of keeping ahead of the technology curve in maintaining a unique advantage. Because I always purchase the best available the lifespan often exceeds five years, as an example my RANE MP 24z and TTM57 mixers and Denon CD players are as solid as the day I purchased them.

I have a dedicated procedure in testing and reviewing products prior purchasing, and outside of Johnny Dee, Jose, Drax and a select few others I professionally trust, I would never rush out and purchase an item based only on what I read on online boards such as this - I consider that a recipe for disaster and I've read many complaints from individuals who did and later regretted it. Now as a disclaimer I did rush out and get a Denon DN-D4500 dual CD player in anticipation of the soon to be released Denon Controller and as soon as the DN-Hd2500 was available it was in my rack and that was an investment of great value to me - I trusted Denon and they hit a homerun with the new controller where so many others just dropped the ball as far as I was concerned.

I'm glad I charge enough for my service to enable me the finances to purchase what I need in a timely manner and not have to wait for price reductions, the advantages of getting a jump on the market has always benefited me...The major secret is timing and knowing what and when to purchase and that I don't share...
 
I feel sorry for all of the folks that could not wait to get their hands on the Iphone. Paying double for it, standing in lines. Not for me. 1st gneration models always have glitches and AT &T's service is not all that good in my opinion.
Back to the thread.

I just posted in the Computer &Tech section about one little fact not brought out in all the marketing hype...... it doesn't work with Windows 64bit systems.
 
We've rarely bought anything just 'cause it was new. I prefer to let it wait until I know more about it.

In our experience, bbs forums have been of immense help when deciding to purchase business equipment. We planned our Carvin equipment purchases long before buying anything. Advice came from folks we'd known for years.

True, newer things came along during the planning phase but we stuck with our decisions. Some of the newer stuff panned out. Some did not. The stuff that didn't pan out had to be modded and/or redesigned. In those cases I'm glad we didn't buy the latest and greatest. :)