Sound card...what do you prefer?

To many ads? Support ODJT and see no ads!
What program are you using? I've read that VDJ works better with the Maya 44 USB while PCDJ works better with Gigaport.

There's lots of options out there.
 
I'm leaning towards Virtual DJ since the others don't support Vista.
I've downloaded the trial software & tested it out. It's pretty sweet.

Also...When the laptop is connected to your mixer (via soundcard) do you need to use 2 line outputs? (like a dual CD player player 1, player 2)
 
Depends...

If you used two WDM sound cards like I mentioned above, each one would be an output to a separate mixer channel for each software deck.

If you used a Gigaport with ASIO drivers, and wanted the same functionality, you would do the same, only using a single Gigaport, assigning it's channels.

You can also run a single channel out (one basic sound card), to one channel on the mixer on most software. In that case, you can only do the mixing/cueing in the software, and not on your mixer, since you only have one input coming into the mixer.

I have some sample setups shown on this page, and it will pretty much apply to any software, just substitute their config page for mine:

http://www.rockit2000.com/DJSoftware/dj-rockit2000-setup.htm
 
.

You can also run a single channel out (one basic sound card), to one channel on the mixer on most software. In that case, you can only do the mixing/cueing in the software, and not on your mixer, since you only have one input coming into the mixer.


That's how I've been running mine from the get-go. I'm gonna be buying a Maya in the near future though.
 
Does Rockit2000 support Vista?

Yep :)

I just recommend XP, because I have to do less support for the OS. Otherwise, I end up teaching people how to use Vista, which takes up way too much of my time :sqwink:
 
Basically, if you want to use the cueing on the hardware mixer, you need to come in on two separate channels. So, either two cards using standard Windows drivers, or one multi-output card using ASIO drivers (or a dual channel USB mixer).

Rockit doesn't support ASIO drivers, BTW. Couple reasons:

1) ASIO is not a Window's standard, so they won't help support them, and...

2) Hardware (sound card) manufacturers, don't always implement their drivers the same way, which creates a support nightmare for us. It's easier, and cheaper, to use two standard WDM cards, which are plug and play, and sound just as good as most of the mid-high range ASIO multi cards.

I'm one of those who prefers doing things the easy way ;)
 
Hi Bill
Rich freeze here, I use the gigaport AG usb sound card. Works great and I only paid 119 for it. I got it from Pro Sound. I'm using DJPower software on 3 different laptops. If you need any info for have any questions just call me after 2:30 cst daily at 1-920-892-8901 or e-mail me at [email protected]
Rch Freeze
 
Hi there
Rich Freeze here. I use DJPower on 3 different machines with no problem. I'm also using Gigaport AG USB Sound card with no problems. Just don't install the ASIO Drivers.
Rich Freeze
Basically, if you want to use the cueing on the hardware mixer, you need to come in on two separate channels. So, either two cards using standard Windows drivers, or one multi-output card using ASIO drivers (or a dual channel USB mixer).

Rockit doesn't support ASIO drivers, BTW. Couple reasons:

1) ASIO is not a Window's standard, so they won't help support them, and...

2) Hardware (sound card) manufacturers, don't always implement their drivers the same way, which creates a support nightmare for us. It's easier, and cheaper, to use two standard WDM cards, which are plug and play, and sound just as good as most of the mid-high range ASIO multi cards.

I'm one of those who prefers doing things the easy way ;)
 
fasttrackpro_front-rear.jpg


Definitely my favorite, awaiting Vista drivers for it, running on xp now.
 
ok I'm really bad,,, but as I look at these pics, I am guessing I use a USB cable outa my lap top into that USB plug there on the top pic,,,

but how would I get two stereo outs into 2 channels on my mixer?

Use outputs 1 &2 for one player and 3 & 4 for the other?
 
That is the correct way for an external mixer Chuck.

If you use the internal (program's) mixer like I do, I prefer the balanced outputs (TRS or Tip Ring Sleeve) which offers a much cleaner signal I have found.
In that case the output signal alternates left and right deck to that 1&2 output and leaves the 3&4 channels for monitoring and cueing.

In my case I don't use a conventional mixer, but a XSession midi mixer utilizing all of the control the program offers including gain, eq, phone volume and mix, and A/B and Main volume.
The twin mic and phone mixers that this card offers is key to my set up, It's more of a mixer than just a sound card for me particularly when doing karaoke.

It also handles my back up ipod source in and mic, and does so independent of Windows.
So if I have a problem and need to reboot I can do so without interruption of sound.
 
10757162426-http___www.computersandmusic.com_productimages_emu_emu_1820_deets.jpg-Windows-Internet-Explorer.png

Emu1820m

M for mmmmmmm. Everything is wired through emu1820 inputs, then routed out through the ASIO bus then through a DAW called reaper. May add a little ASIO delay, but with asio I have many ways of internally routing inputs so the good outweighs the bad. For instance..

We have 3 music sources. The PC, the Laserdisk, and finally the DVD/CDG player. I have a slider for each. I also have a 4th slider labled "Background Music" that is a mix of all 3 routed to one channel, controlled with 1 slider.

I can also map effects presets to keypresses, joysticks or midi controllers. The emu's effects are hardware accellerated by the 1820 to boot.

Internal mixers are great, but they're even better when complimented with midi controllers.