Cut and paste from another board, originally posted 2004.
I bought a Behringer VMX1000 before Musicisnd Friend had them in stock. I was the FIRST in line! I recived it at the begining of this year. Great, well one problem I found is with the assignable crossfader. If your channel is live and you are to switch the crossfader to that channel, you will notice a signifigant drop in audio. No big deal, I dont use crossfader much anyway.
Moving on, noticed that when the "mic on" button is depressed and all values are set to 0 on the High, Mid, Low and Vol. All hell breaks loose when you hit the mic on button. The channel is REALLY HOT! So I figure its a mistake. I send it back, get a new unit that does the same thing but not AS hot when the values are all down. The DJ must adjust the Master Volume to lesson the hotness of the mic.
So I deal with this for a few months, but gig after gig I find it very diffiult to really pump it up beacuse when I need to get on the mic I have to pull back the Master level to avoid feed back.
There were several threads about this, Big Bopper insisted that this was the way this unit was engineered. No one believed him. I didnt either, called Behringer, sent my unit to the authorized repair shop here in Southern California.
I got my VMX back today with the invoice stating:
NOTE: The Mic Control potentiometers do not turn off, they go from minimum to maximum.
NOTE: The "hotness" levels are in the design of the mixer - this is not a defect.
So I call the repair center and ask about it. They say that the unit tested to Behringers specs and no defect was noted. When asked why are the mic channels so hot, they tell me thats what you get when you buy a $200.00 mixer. I asked if there was a way of fixing the problem. The tech said to re-engineer this piece of equipment would cost more than the unit itself.
Now another thread out of Texas is saying that they can if fact repair the problem. What it comes down to is I am stuck with a mixer that I cannot use.
To Big Bopper, the Behringer rep here. What can I do now? I cant return it, its been too long? I should have beleved you when you said from the word go that this was a design issue. I am truly dissapointed in this company. Evedently there are certain places that will fix the units properly and some that wont? I waisted another $25.00 to get my VMX1000 to the repair center and they did nothing.
I have been a supporter of Behringer since the begining. Always touting thier niche market and awesome pricing. I am now finding myself stuck with a un-useable unit. To Behringers credit, I will repost here if Big Bopper comes up with a solution.
--------------------------------------------------------------------------
BigBopper is the username of a Behringer rep that frequented the board I posted this on, he also designed the unit. He no longer works for Behringer.
So, the unit was sent to and from repair centers and Behringer 4 times. Finally, they sent me a new unit that was factory modified. It is somewhat better, but not completely fixed. I use it as a back up.
However, I own several other pieces of behringer equipment and all have been solid performers.
Groovielou