Need Help....Choosing the Amp

To many ads? Support ODJT and see no ads!

cbarronx23

New DJ
Dec 12, 2006
1,093
0
35
Once I sell my JRX subs, I am thinking about picking up a pair of EV QRx 118s's. I would power them with a QSC PLX-3602, 4 ohm bridged mono delivering 1800 watts to eachg cab.

Now, after I have the subs, eventually I'd buy tops to match. I like the sound and clarity of the QRx 115/75. When I heard them, there was a huge difference between the models running bi-amped, then the ones just single-amped. I'm thinking about a PLX-3602, running 4 ohm STEREO, delivering 1250 to each speaker, for the mids. Now, where I am stuck is choosing the amps for the highs on that box.

Any thoughts? Obviously, I'd like something that matches, but I guess you can't always get what you want.


QRx 115/75


PLX Series Amps
 
I have a bunch of 3602's and do use them to run my mid's just like you describe.

I power the horns on my rig with a RMX 850. I believe they get 200 watts
@ 8 ohms.

When djing at smaller venues, i do need to cut them back, but at larger venues it works great, and for live sound even better.

The horns will take quite a bit without harm.
(i know a local guy that powers his martin audio highs with a Crown K1)
 
If the Ev's are 8 ohm horns.

I run P.A.S. speakers, and mine are 8 ohms when bi-amped.

And yes they get 200 watts, i run (1) off each side.
The 850 just idles along
 
Mike Pyle told me on the other board that as long as I'm willing to spend the extra $ and use a limiter, that the PLX-1104 is a feasable option. I really really like for my amps to match, so I'll think about it.

Thanks,
Chris
 
Chris,

Your highs or mid-highs do not need a headroom-heavy amp. If you're using a good quality active crossover, a high-powered amp for the horns will be a waste.

On the other hand, Mike's advice makes good sense from a redundancy standpoint. Should the unthinkable occur and your sub amp decides to take the night off, you still have the headroom you need with the highs amp. It may be repatched to run full range.
 
The QRX115/75 is an amazing box. We have 2 demos here in fact that we just used as monitors at a fundraiser concert for our local food shelf. We actually have quite a bit of EV demo stuff at untouchable prices, just in case you're interested. :)

Tough to beat the PLX series amps... reliable and outstanding sound quality. Also very impressed with EV's CP series. You could easily run those QRX115s off of a CP3000 with LOTS of room to spare.

Ben
 
So I've Been Busy Today...........

QRx 118s subs ordered, PLX-3602 ordered.

Alas, it's been a busy day. Needless to say, I'm done for quite a while. Gonna really get it from the mother this time, lol.

Thanks for all your help, next move is the QRx 115/75's. My EONs are gonna really suck now, especially when paired up with these awesome subs.
 
Me and my stupid arse just bought a Denon DN-X500 as well. Credit card bill will be INSANE this month......but worth it. Numark mixer is on the fritz, and the Denon will be a lot better quality. I spoke to Michael Doucot today, and he suggested I look at the AC-ONE for processing, rather than my DriveRack, which has been on the fritz anyhow. I could probably go w/o it til I order the tops anyways.

Now I'm really done, lol.
 
The AC-One looks to me like an analog 2 way crossover with a 3 band eq. The only crossover function it has is between the tops and the subs. It would not permit you to bi-amp the tops later. You already will have a 3 band eq on your mixer. I don't see that this unit will fulfill many of the duties of a system processor, including those of precise parametric eq and limiting.

If you are just going to use an analog crossover, I would recommend the dbx 234XL:

http://www.dbxpro.com/234XL/234XL.php

The dbx unit would have the flexibility at least of letting you run stereo 3 way later if you choose to biamp your top cabinets.
 
I just noticed I'm the highest bidder on a new DRPA unit, with RTA mic, with only an hour and a half left. If I win, I'll sell the old DRPA unit, which only seems to have a problem with the 5th output. Weird. Anyways, we'll see what happens in an hour.

I do like the look of the dbx unit. Thanks, Mike.

BTW, mixer and amp came from Mike. Awesome guy with awesome prices.
 
B.C. thats more of a hassle for me. It was just easier to buy a new one from Ben @ NLFX than worry about getting it repaired. I just sold it to a friend of mine for $250, who doesn't need the 5th output, which seems to be the problem, as he is only running a 2-way system.

To be quite honest, I never really used the unit that much in the first place. Now that I have the QRx system, I will be using it a lot more often.