OK, the units arrived today, from Sound Ideas Inc in Columbus OH.
They used very nice packing materials, with 2 units shipped in a single oversized box with lots of styrofoam popcorn.
Bulb installation (ELC-25) was very fast and efficient. No need to make adjustments as the beam is aimed exactly where it has to go.
Units were mounted on either side of a T-bar atop a Chauvet CH-01 tripod. Each DJ Squeeze weighs 13 pounds, about the same as my old ADJ Vertipros & Alpha-Moons combined.
One problem (minor) involved aiming the units downward: the back end of these devices are very heavy, making it difficult to make this adjustment. I think this may be the reason why the DJ Squeeze 2 is being discontinued for 1/4 of the retail price ($129 instead of $500).
Once I was able to aim the units properly, Since it was still daytime, I had to wait for some clouds B-4 firing up the music and the power strip. Units are very quick to warm up and start playing. I'm not sure of the Duty Cycle for this piece......the owner's manual doesn't say anything about rest time. I will need total darkness before trying out the beam focus.
Hooked up in a master/slave mode using DMX cables, these units do a pretty good job of lighting up the center of the dance floor, as expected.
I angled the units at a 40 degree spread from center. Each unit has an 8-30 degree beam spread. the result of my array, makes for an exciting center-of-dance floor effect that is not boring or monotonous (like my old ADJ fixtures). They are intelligent fixtures but I'm just doing the Sound Activated plug n' play mode, for the time being.
With the two Chavet ILS Mini-Legend intels already owned, I'm now in possession of a very efficient, high energy dance lighting system that only takes about 20 minutes to set up, and about 10 minutes to break down.
The DMX- series by Chauvet, comes with a full TWO-YEAR factory warranty.
Highly recommended, at the closeout price! Buy four of them and put them two tripods, and you will have a very cost-effective dance lighting system for just over $500.
Go Squeeze!!!
They used very nice packing materials, with 2 units shipped in a single oversized box with lots of styrofoam popcorn.
Bulb installation (ELC-25) was very fast and efficient. No need to make adjustments as the beam is aimed exactly where it has to go.
Units were mounted on either side of a T-bar atop a Chauvet CH-01 tripod. Each DJ Squeeze weighs 13 pounds, about the same as my old ADJ Vertipros & Alpha-Moons combined.
One problem (minor) involved aiming the units downward: the back end of these devices are very heavy, making it difficult to make this adjustment. I think this may be the reason why the DJ Squeeze 2 is being discontinued for 1/4 of the retail price ($129 instead of $500).
Once I was able to aim the units properly, Since it was still daytime, I had to wait for some clouds B-4 firing up the music and the power strip. Units are very quick to warm up and start playing. I'm not sure of the Duty Cycle for this piece......the owner's manual doesn't say anything about rest time. I will need total darkness before trying out the beam focus.
Hooked up in a master/slave mode using DMX cables, these units do a pretty good job of lighting up the center of the dance floor, as expected.
I angled the units at a 40 degree spread from center. Each unit has an 8-30 degree beam spread. the result of my array, makes for an exciting center-of-dance floor effect that is not boring or monotonous (like my old ADJ fixtures). They are intelligent fixtures but I'm just doing the Sound Activated plug n' play mode, for the time being.
With the two Chavet ILS Mini-Legend intels already owned, I'm now in possession of a very efficient, high energy dance lighting system that only takes about 20 minutes to set up, and about 10 minutes to break down.
The DMX- series by Chauvet, comes with a full TWO-YEAR factory warranty.
Highly recommended, at the closeout price! Buy four of them and put them two tripods, and you will have a very cost-effective dance lighting system for just over $500.
Go Squeeze!!!