Sound Techs.... Question???

To many ads? Support ODJT and see no ads!
Sorry this is so long but a lot of points have been brought up -

This is the running argument that I have with Fred. It really isn’t that I disagree with Fred, just that I contend packaged systems exist for simple applications (and less technical operators). As the number of controls and adjustments increase the possibility of making the system sound absolutely dreadful increases too (if improperly used). More than a little education is called for. Without the education it might be better to stick with the SRM-450s. Someone may get outside help but the outside help isn’t going to be there on Saturday night.

Using just the three Crown K2s we are on that road toward serious power. The EV unit has some “must have” features if serious power is to be employed. Fred was making an argument for many of the functions the EV Dx38 provides in the last week or so in the FOH thread. I believe he was correct in his contentions.

I respectfully submit that it is bad practice to change crossover settings on the fly. Likewise there are far more people that believe they can adjust 1/3 octave equalizers on the fly or by ear than actually exist. One of the things that EV unit has going for it is that it doesn’t have a bunch of knobs that can confuse and befuddle. It can provide compression and limiting. Not a bad thing when talking KW ‘o power. It will allow presets that have been thought out when time allows rather than during the heat of battle. The goal should be to limit the number of variables dealt with during live performance.

A case in point for this type of thinking puts the crossover functions in the amplifier. The Crown Xti employs DSP built in to the amp which allows the crossover functions to be integrated into the amp. I point this out to illustrate I’m not alone in my ideas.

Just one more point guys. A #12-8 speaker cable weighs 275 lbs per 1000 feet and probably costs the national debt. You guys may want to be near this monster when it is plays loudly enough to satisfy the pups. I want to be in the next county to keep my hearing. Remote placement of amplifiers becomes a real attractive option when the venue is large. Better to run some shielded audio cable than a horse cock of a speaker cable. Put on the FOH hat, take off the DJ hat.
 
There's a great deal of truth to that. The more complex one makes it, the easier it is to foul it up.

I have never worked with a packaged system. Our system as it is came recommended by professional soundmen. These folks are often adamant about hands-on processing and management of live sound. It is overkill for DJ company use, yet serves our needs well.

That said, the majority of processing controls are set and forget for DJs. The active crosssover and 1/3 octave EQ are set for the speaker systems we use and feedback ring removal. They're never touched again. If we were managing live sound with differing cab sets and mics, that'd be a different story.
 
Thanks Fred

That's my point.
 
One other thing to bring up,

I know a few guy's that use K2's & K1's in there live sound rigs.

If these are to be used for sub duty, I would install some fans in that rack..
K2's will get hot and overheat when piled on top of each other in the rack with no rack cooling
 
Space between amps is recommended by Crown

I don't know if fans (by themselves) will make much difference. The K2 is convection cooled and has no fans. The design calls for the top and bottom to act as radiators. If their capabilities are to be maxed out 1RU between amps would not be a bad idea. Space between units is suggested by Crown. Those empty spaces could be covered with perforated blank panels. Thermostatically controlled fans could draw air through the space between units making noise only when it wouldn't be noticed.
 
I feel like I'm cheating on my girlfriend . . . Sid

Tyrone is a great guy, but doesn't understand what he bought.

The way the system was wired when he bought it was . . .
Signal went to an EV DX38 digital processor system (like a DBX Drive rack but much quieter . . . 125db signal to noise ratio).

The system rack was wired as a 2- way system. The high outputs were wired to the top 2 - K2 amps (one channel for each speaker) very crisp and very clean. They were not strapped to mono as they had plenty of power for each JBL 4726A. The speakers were choked at 100.1hz (because that's the frequency JBL Tech service told me to dial in when I called them).

The low fequencies were sent to the bottom K2 (This amp could power either 2 subs (4 ohm cabinets each) or all 4 subs. Most jobs I would only bring 2 subs, but some jobs I would connect all 4 JBL4719 woofers (8 speakers). At these times the amp would see 2 ohms.

All 3 of these amps would work off of one 15amp circuit and I never has any problem. The speakon connectors were wired that highs were pin set 1 (+/-). The woofers were pin set 2 (+/-). You could run 4 conductor speakon cables (included) and set up was idiot proof.

The system kicked butt, I need to get smaller as my business has changed and truck room has become a factor for screens, projectors, staging, pipe and drape, etc.

I have now purchased JBL VP7315 (2) with QSC 18" powered subs and they work great for my mitzvahs plus I have ample truck room to have a party inside.

Don't tell Sid I was here. I feel like a slutpuppy :sqcool:
 
Thanks Bernie...

Glad to see you over here!

I wasn't sure if I could run all four subs on just one amp, and I didn't want to bother you about it any more. Yes, I got more than I expected. OK, so I'll just leave it alone and run it the way you set it up.

The weather is nice, and I'll fire it up for the first time next week... [fingers crossed].

By the way... those of you who don't know Bernie, he has a very nice show out in Chicago. He specializes in Mitzvahs. He also has a very nice vehicle (Jambulance) that we've talked about in the forums... how about a pic, Bernie?
 
Do i get credit for converting bernie???

Tyrone,
I sent bernie a PM at 'chat, because i didn't want you to get talked into buying stuff that you didn't need,

So i sent bernie a head's up that you needed help.
Glad to see that he responded.


Thanks Bernie. (your secret should be safe)