You guys may remember the GTD mics I put in at an auditorium at my day job (perhaps not). Yesterday, I got a call from the facility manager, asking my assistance.
The system they have is a yammy mixer (12-channel), and 300-watt "industrial Peavey" power amp (has hard-wired connections instead of plugs. It has a single, EV speaker hanging at the ceiling (15-feet), about 12 feet in front of the stage area. My guess is they probably got hit with lightning, which possibly damaged the amp and sounded like a driver was fried. The interesting bit about the system is they have a potentiometer hard-wired between the amp and the speaker with the knob located at the back of the room.
Fast forward, I brought in a pair of Carvin 2-ways (15") and an IPR3000. Stripped out the old amp, put in the new, ran speaker cables to either side of the room and have the cabs sitting in chairs (40-foot spread) as a temporary measure. We're probably going over to Guitar Center later to pickup a new amp, driverack and I'm thinking some yammy 15s, along with wall mounts for the speakers. My intention is to mount the speakers about 9 feet up, opposite side, and against the wall, even with the stage area. The sound today is very good. Tons of headroom, the mics are loud and clear and the only way you can get feedback is to walk right up in front of a speaker. BTW, this is probably a 50X100 foot room.
They normally keep the sound system cabinet (wall unit) locked and the inputs hot. You just walk in, either plug in a wired mic or put batteries in a wireless and it just works. Simple, simple. They do NOT want anybody messing with settings on the mixer. What they do want is that overall volume knob. I'm thinking to have some kind of passive, single-knob "mixer" that I'd put between the yammy mixer and the driverack/amp. We'd probably just drill a hole into the steel cabinet, mount the knob and let it be a simple volume override. Hopefully, it won't even need to be touched, especially with all the extra headroom they now have. Sorry to be so long but does anybody have a recommendation for this?
BTW, we have 8 wireless mic capacity with the 2 GTD units. I'm using the summed output on each unit to send to 2 channels on the yamaha mixer. We're probably going to add a 2-channel GTD that will have bodypacks/lavs. They'll have 8 hand-held wireless, 2 lavs, 4 hard-wired plugs, and a laptop input (1/8"). Should be a cooking little rig and easy enough for anyone to operate.
The system they have is a yammy mixer (12-channel), and 300-watt "industrial Peavey" power amp (has hard-wired connections instead of plugs. It has a single, EV speaker hanging at the ceiling (15-feet), about 12 feet in front of the stage area. My guess is they probably got hit with lightning, which possibly damaged the amp and sounded like a driver was fried. The interesting bit about the system is they have a potentiometer hard-wired between the amp and the speaker with the knob located at the back of the room.
Fast forward, I brought in a pair of Carvin 2-ways (15") and an IPR3000. Stripped out the old amp, put in the new, ran speaker cables to either side of the room and have the cabs sitting in chairs (40-foot spread) as a temporary measure. We're probably going over to Guitar Center later to pickup a new amp, driverack and I'm thinking some yammy 15s, along with wall mounts for the speakers. My intention is to mount the speakers about 9 feet up, opposite side, and against the wall, even with the stage area. The sound today is very good. Tons of headroom, the mics are loud and clear and the only way you can get feedback is to walk right up in front of a speaker. BTW, this is probably a 50X100 foot room.
They normally keep the sound system cabinet (wall unit) locked and the inputs hot. You just walk in, either plug in a wired mic or put batteries in a wireless and it just works. Simple, simple. They do NOT want anybody messing with settings on the mixer. What they do want is that overall volume knob. I'm thinking to have some kind of passive, single-knob "mixer" that I'd put between the yammy mixer and the driverack/amp. We'd probably just drill a hole into the steel cabinet, mount the knob and let it be a simple volume override. Hopefully, it won't even need to be touched, especially with all the extra headroom they now have. Sorry to be so long but does anybody have a recommendation for this?
BTW, we have 8 wireless mic capacity with the 2 GTD units. I'm using the summed output on each unit to send to 2 channels on the yamaha mixer. We're probably going to add a 2-channel GTD that will have bodypacks/lavs. They'll have 8 hand-held wireless, 2 lavs, 4 hard-wired plugs, and a laptop input (1/8"). Should be a cooking little rig and easy enough for anyone to operate.
