Noob Question About Power Distro.

To many ads? Support ODJT and see no ads!
And remember to always check with a volt meter the voltage on the outlets in your distro to be sure you're not getting 220 V. You can never forget a mistake in wiring.


Yea, thanks. I was just reading that on PSW.

Can anyone provide a link to a Furman or better a Motion Labs power distro so that I would know what I need, and I can use the specs to find other ones?

Thanks
 
Yea, thanks. I was just reading that on PSW.

Can anyone provide a link to a Furman or better a Motion Labs power distro so that I would know what I need, and I can use the specs to find other ones?

Thanks

I use 2 of the ASD120 Furmans you linked. I keep one wired for 3 phase and one for single phase. they also make the ACD-100, which is simpler since it does not have sequenced startup and shutdown, but can still be wired for single or 3 phase:
http://www.furmansound.com/product.php?div=01&id=ACD-100

As for Motion Labs, look at their RacPacs:
http://www.motionlabs.com/c-35-2-space.aspx

They have a variety of stock configurations for both 3 phase and single phase supplies, and I think you can special order most anything you want.

You need to first determine your needs and the available power sources at the venues you plan to work.
 
Well, until I can figure out what I'm doing in terms of power, I think I'm gonna put this whole sound upgrading thing on hold. I guess for now I'm just going to have to keep renting when I need a big rig.

Until then, I think I'm gonna buy some more lights. Tyrone would be proud. :sqwink:

Thanks for your help,
Chris
 
Just remember that the lights draw(as a group) a lot more than the audio amps (When they are cruising at a gig, that may change if you run them very hard). Unless you get LEDs.
 
This is true. A 500 watt halogen lamp draws around 4 amperes at 120 volts. Amperage or current draw is your easiest method of calculating service needs since service and circuit protection is rated in amperes.

With lighting loads, it adds up quickly. :)
 
I'm hoping that 4 scanners, 8 LED pars, and some sort of centerpiece will run on <1 circut. I'll do the math in the morning.

Goodnight all.
 
On a single 20 AMP circuit I'm running (New toys ;) ) 4 Intimidator 2.0, 1 Insignia 2.0 and 4 DMX-500 Color changers.
 
I don’t mind tell you guys that I’m finding this conversation very confusing.

It might be in order to say that a distribution panel does not step down the voltage. The distribution panel only connects your equipment to the circuits that are available. If the supply panel doesn’t have the voltage you need, the distribution panel regardless of configuration will not be able to provide those voltages either.

Since both 220V (implying a standard Edison circuit) and three-phase distribution sets ups have been mentioned is anyone suggesting that there is one idiot-proof configuration that will suit the end user for both these applications? If you play just one venue, I see no problem. Taking your act on the road means plugging into unfamiliar receptacles, the variety of which can be daunting most especially to the non-technical among us.

Does anyone here believe the problem can be simplified to the point where the non-technical user can make the appropriate connections in various venues without problem?
 
...Does anyone here believe the problem can be simplified to the point where the non-technical user can make the appropriate connections in various venues without problem?

No. It's not that complicated, but it also is not a job for someone who is completely unknowledgeable. They would either need to learn what they are dealing with in terms of power and different receptacles, and how to meter it, or else let someone else who is qualified hook them up.