Broken Case, Advice Needed.......

To many ads? Support ODJT and see no ads!

cbarronx23

New DJ
Dec 12, 2006
1,093
0
35
Well, a few gigs ago I realized that the back door on my odyssey case was not closing evenly. The next week, I was closing the back of the case and it ripped completely off. As you'll see in the pictures, the door itself came off its own hinge. I would just order another door, but I can't figure out how to remove the existing hardware or even to add another. Odyssey uses some kind of special hardware, and it doesn't appear to be removable.

Thanks for any help you can provide.

-Chris
 

Attachments

  • 100_0405.jpg
    100_0405.jpg
    121.2 KB · Views: 4
  • 100_0406.jpg
    100_0406.jpg
    112.4 KB · Views: 4
Well, if you look closely, there is nothing to drill into. The wood section of the door seperated from the metal frame.
 
doesn't it just slide in? you should be able to just drill a hole in the metal and in two places the top and bottom, then put in a rivet it looks like. Just attach it as if it is there... Also gorilla glue does wonders :) gander mountain sells it as well as craft stores.

addititionally you could send it back to odyssey they are a pretty friendly company, and since it is custom made, should be not be to hard to repair, or get warranted.
 
Agreed... try some Gorilla Glue or contact cement first.

If all else fails you may wish to contact Odyssey and inquire about a replacement door complete with hinges. Replacing the door shouldn't be hard to do.

Making a replacement would require a lot of woodworking and be a PITA (my opinion).
 
Chris,
If I'm not mistaken, the case is relatively new. I would check the warranty on them and then contact Odyssey.