Does anyone still load passive SR systems?

To many ads? Support ODJT and see no ads!
thanks for the compliment John my comment was in regards to how those plastic piles of Dung I take out to each gig do just fine no offense to you good folks with the birch cabinets I have used them in the past and amps unfortunately my arthritis wont allow me the transportation of such superior sounding units. Though my current system seems to sound pretty good to my clients. Getting compliments most every event.
 
For what it's worth. I am using plastic tops with birch subs. I did this also because I got sick of lifting heavy speakers up and down from my basement to the vehicle. The tops went on a diet and now I don't mind the lifting.
As for the subs. 1 out of 2 mainly comes out but if I need to bring them both, I make sure I have someone to help me.
Now if I had a garage attached to the house, it would be all wood in the hood. But until then!!
 
I will be purchasing a pair of RCF birch based subs to compliment the piles of plastic but until then they will just have to get me through another spring. Oh and newsflash, true live sound is not attainable by typical audio speakers. Im probably going to be in the market for L1's or a system that emits a true live sound.
 
Just curious.

Im probabyl going to be in the market for L1's or a system that emits a true live sound.[/QUOTE]

Some of the earlier L1 buyers turned around and sold their systems in less than a year. Will this be used as an additional system to what you have now? Or will you use this as the one and only set up?
 
I will most likely use this for almost any and all events and when the concert style events come along I will pull out the big guns and pay a Roadie to haul my gear for Schools etc. You able to take a phone call ?
 
WHY ???

What I Cant Stand Is:
Why Are They Making The Front Metal Grill Curve Around The Side Of The Speaker Case ?

My Crew Will Dent The Dang Things In The First 2 Weeks...
:sqeek:
So Why ??? >>> JBL, QSC, Turbo Sound, Mackie And EV... All Of Them Are Doing This...

Just Wonderin...

I Know Its Off Topic ... Sorry:rofl:
 

Attachments

  • Small Nag.JPG
    Small Nag.JPG
    24.3 KB · Views: 3
I agree. The wrap around grill is a pain in the butt. When I had a pair of Mackie S215's, the grills would always get pushed in from moving them around. I always ended up popping them out before each gig.:sqmad:
 
It makes you wonder why companies do that. They should know that their speakers are going to be treated rough. I just got a new pair of SA 1521z. They have wrap a round grill. I've been thinking of differant ways to keep them from getting dented.
 
G Man! I loaded my Mackies with the back side of the speaker facing me. This allowed me to lean it against my chest to get them in the truck and on a stand. I would also grab a set of covers for them, the grills scatch easy during transport. I bought covers from this guy and they were great. Not as thick as other covers, but they worked well and kept the Mackies looking like new.
http://cgi.ebay.com/MACKIE-SA1521z-...ryZ47094QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
 
G Man! I loaded my Mackies with the back side of the speaker facing me. This allowed me to lean it against my chest to get them in the truck and on a stand. I would also grab a set of covers for them, the grills scatch easy during transport. I bought covers from this guy and they were great. Not as thick as other covers, but they worked well and kept the Mackies looking like new.
http://cgi.ebay.com/MACKIE-SA1521z-...ryZ47094QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

John, thank you for that post and link! I was thinking of getting Lecovers, but I like the price of the ones that are on Ebay. Very cool, thanks again buddy.
 
If I ever get speakers with the wrap around grill like that, I get a case like this. I would also get the padded covers to put on them before they went into the case.

$160 + $30 shipping isn't bad for a nice case like this.
 
I have seen dented grille Eons and Mackies out there and it just irritates me to no end. It looks so half-assed.

Expanded steel grilles are just one aspect of our Carvin cabs I love. They're damn near indestructible. The grilles may vibrate loose but that can be fixed easily enough. They're powder-coated black and can take a good, swift kick with no damage. Also, these cabs have protruding edges ~ you can drop 'em face down on the floor and the grille won't be touched.

We have factory covers for all of our cabs... they still look like new.

Just me... but I don't care for cabs that look like giant transistor radios from the '60s.
 
Diffraction -

What I Cant Stand Is:
Why Are They Making The Front Metal Grill Curve Around The Side Of The Speaker Case ?

My Crew Will Dent The Dang Things In The First 2 Weeks...
:sqeek:
So Why ??? >>> JBL, QSC, Turbo Sound, Mackie And EV... All Of Them Are Doing This...

Just Wonderin...

I Know Its Off Topic ... Sorry:rofl:

If you look at most home speakers today you will see the trend is towards flush mounting the drivers with no protruding lip around the periphery of the speaker. I'll be damned if I can hear the difference but I'm told the change is to eliminate the effects of diffraction which cause unintended peaks and dips in the response curve mostly in the range of the tweeter.

It seems that the commercial market is trying to catch up with this aural if not physical improvement in speaker design.