HDMI to VGA Converter
- Thread starter ahoustondj
- Start date
Unfortunately, I have no experience with any of them. That one seems to have review all over the map. This one ( http://www.amazon.com/Audio-Convert...2?s=electronics&ie=UTF8&qid=1337180797&sr=1-2 ) seems to be reviewed much better.
I would power it just to be on the safe side. Video is not my forte' but losing eyebrows due to electric shock is!
DjDennis
RIP- My Dad (2011), Sister (2013) and Mum (2017)
Look at the link you posted - there is a DC power jack on that unit for it's 12V wall wart power supply. You can't convert digital to analog without a power source.
A bigger issue is that unit only converts to RGB Component YpBpR and you have no control over the resolution or sync modes. It will not be compatible with all the devices you might encounter.
What you want is a video scaler with an DVI or HDMI input. Then you can output as RGB, RGBs, RGsB, RGBHV, VGA, SVGA, XGA, etc. as needed, and change the sync mode match whatever display device you are using.
http://www.fullcompass.com/product/...eps&utm_medium=shopping&utm_campaign=googleps
A bigger issue is that unit only converts to RGB Component YpBpR and you have no control over the resolution or sync modes. It will not be compatible with all the devices you might encounter.
What you want is a video scaler with an DVI or HDMI input. Then you can output as RGB, RGBs, RGsB, RGBHV, VGA, SVGA, XGA, etc. as needed, and change the sync mode match whatever display device you are using.
http://www.fullcompass.com/product/...eps&utm_medium=shopping&utm_campaign=googleps
Bob, Thanks for your inpuit. The first link I posted .....that unit also converts to VGA along with RGB Component YpBpR. I believe that the one Steve posted looks like it will do the job.
I don't do video on a large scale, just Karaoke, so the unit you posted will be vastly overkill.
The problem you can encounter is that a lot of display devices have a D-sub (15 pin) connector - but, it is RGsB not VGA. Worse, they often mark them as just "RGB" and if the device can't auto-detect the sync-mode you need another way to figure and correct for it. So, if you are moving around among different displays test them ahead of time to make sure the input is exactly what you think it is.
DjDennis
RIP- My Dad (2011), Sister (2013) and Mum (2017)
I have 26" Vizio Flat Screen TV/Monitor that has HDMI, VGA, Component, Composite, S-Video and Cable Inputs. I am looking at the converter to have just in case I need it. I have cables in different lengths up to 50' for every type of connection along with powered/amplified splitters.I may just buy a Projector and Screen so I don't have to depend on the Venue's TV. Or maybe use my projector if their's is not accessible or compatible.
DjDennis
RIP- My Dad (2011), Sister (2013) and Mum (2017)
If you have an event somewhere with a display whose D-sub configuration is unknown - just go there and connect a laptop's VGA port and see what happens. If the TV won't work but has a menu option to change the sync mode..set it to RGBHV, VGA, or SVGA.
I will remember that however, I would rather my Performer's Screen work, the one that I carry. The other/venue's screen is for the audience. I know it is almost equally important, because it adds to the excitement. When the Lyrics command their attention with the singers words.
I would use a computer that had a DVI or Display Port out, this way you can have native VGA output.
I headed up the R&D & Install team for a Digital Signage company for a few years and can tell you most converters are CRAP. Even now with my current job we are using Component to HDMI for HD Capture cards and even the high dollar units have issues.
I headed up the R&D & Install team for a Digital Signage company for a few years and can tell you most converters are CRAP. Even now with my current job we are using Component to HDMI for HD Capture cards and even the high dollar units have issues.
DjDennis
RIP- My Dad (2011), Sister (2013) and Mum (2017)
For karaoke I always use older refurbished laptops with an S-video TV out. with a Y/C combiner/splitter as your switcher you are essentially running composite video which can connect to anything. That's all the quality you need for karaoke graphics and all this outdated gear is dirt cheap. Laptops under $200 and old Extron or Kramer switchers that once cost a fortune can be found dirt cheap on Ebay as facilities upgrade to digital. The best way to make money is to simplify and use the least amount of technology necessary to accomplish your goal.
I got it covered now Bob, I can connect or convert just about any format to just about any input on any TV. S Video is what I used to use but lots of new TVs no longer have S Video inputs.
BTW, I value Karaoke Sound just as much as regular Music and Live Sound. What I mean by this is that I set up a full sound system even for just Karaoke. In between Karaoke songs I would often play snippets of regular songs so I don't want any differentiation. My objective is to have singers feel like they are singing in a Live band with full bodied sound. I get longer and non stop Karaoke sets that way unlike the tinny sound from a system with just two speakers.
Don't waste yer time Steve. He apparently does 250 gigs a year, yet manages to be here 365 days -- not sure how that works...
