Does anyone still load passive SR systems?

To many ads? Support ODJT and see no ads!

Fred Wright

Administrator
Staff member
Aug 7, 2006
12,741
1,015
68
Delaware, USA
www.nwedj.com
Folks,

All this blib-blab about active speaker sets is gettin' old. :rolleyes:

Pipsqueak active DJ systems don't impress me. Snot in a wind tunnel molded cabs are just plain ugly and they offer crap for tone.

I'm talking real sound reinforcement... bi- and tri-amped Class A/B power amp racks with some serious headroom feeding birch plywood cabinets to rattle the rafters with a good tone. Real processing components that you have to set up, not spoon-fed crap from China.

Doesn't anyone load real SR equipment anymore? :confused:
 
Ok, my tops are china crap. But my bass is the real deal. I use Yorkville LS 808 subs, a bridged Peavey CS 3000 and a DriveRack 260. My bass kicks a$$.
 
Wow the Wolf is howling tonight. You know I have to agree with you Big Fred.
I run 2 PLX QSC 3002's with a set of dual 15" cab JBL's. I also have a set of the RCF 325i's. The only powered equipment I use are my subs.
But nothing beats that full grade thump from birch.
 
I do, even though I do have some active cabinets I still like big amps ;)
 
No powered speakers here, and I really doubt that I will ever go that route.
 
Damn right I'm howling...

What's a powered speaker?
It's a gimmick that's gotten a lot of DJs in a lot of trouble. :rolleyes:

Even Carvin isn't immune... just ask Max about his experience with the LMs. :eek:

The stuff doesn't perform right out of the box. It's underpowered and overrated. As if the Mackie fiasco wasn't enough, people continue to buy this crap and then complain that it doesn't do what they need it to do.

Well, that's understandable. The stuff offers no amp headroom and has no vocal warmth. The sensitivity rating barely puts a Radio Shack home stereo cab to shame. But it's marketed to DJs and DJs buy the stuff. Oh... and it fits in your minivan. That's what really matters. :rolleyes:

So the next question that arises is about subs. Sure... buy cheap active subs to accompany the cheap active tops. Now you'll have mud to add to your already poor tone. :rolleyes:

I'll say this: a DCM2500 amp bridged at 4 ohms load to a pair of 18s will rattle the walls, right out of the box. A DCM2000 for a 4 ohm load stereo to a pair of dually 15s can thump the house. A DCM1500 for mid-highs feeds a pair of dually 10 2-ways nicely for vocal warmth. We can mix and match it to suit our needs.

Gab about your active Mackies and your Yorkies all you wish if it makes you feel better. But I'll tell you one thing ~ this 6KWRMS tri-amped FOH rig gets the job done. We could do live sound with it if we had to.

But my comments fall upon deaf ears in the DJ community. I don't know what I'm talking about. ;)
 
Yup all passive here bi amped tri amped by times
 
Dual 15's. 4 inch voice coil Sonics. the old kind that still kick fine after 10 years. EV eliminators. DBX Driverack, Crown and QSC amps.

I don't think any of this stuff qualifies as the REAL SR stuff out there....

I just can't afford anything better.

The one thing is though, its crisp and never overdriven...
 
All powered for now, but I hope to be adding a passive system in the near future. I am right now looking at the EV QRx (can get a really good deal on a gently used set). Just need to save up a tad more money.,
 
Folks,

All this blib-blab about active speaker sets is gettin' old. :rolleyes:

Pipsqueak active DJ systems don't impress me. Snot in a wind tunnel molded cabs are just plain ugly and they offer crap for tone.

I'm talking real sound reinforcement... bi- and tri-amped Class A/B power amp racks with some serious headroom feeding birch plywood cabinets to rattle the rafters with a good tone. Real processing components that you have to set up not spoon-fed crap from China.

Doesn't anyone load real SR equipment anymore? :confused:

Fred I doubt few if any are using the type of gear you are referring to class A/B amps are few and far between in the Disc Jockey business

I had the chance one time to buy a rack of 5 Bryston class A/B amps. At the time I didnt have the cash to put out. I wish I had borrowed it Ive been kicking my arse ever since

You can buy some pretty good quality gear but I think the days of true SR rigs used exclusivly for DJ work is long gone :sqfrown:
 
I'll say this: a DCM2500 amp bridged at 4 ohms load to a pair of 18s will rattle the walls, right out of the box. A DCM2000 for a 4 ohm load stereo to a pair of dually 15s can thump the house. A DCM1500 for mid-highs feeds a pair of dually 10 2-ways nicely for vocal warmth. We can mix and match it to suit our needs.

Fred i would think that a dual 15" cab and a dual 10" cab when used together would cause comb filtering effects.
 
Fred i would think that a dual 15" cab and a dual 10" cab when used together would cause comb filtering effects.
Absolutely. We don't use these cabs together stacked.

Only problem we've found... the horn in the dually 15s isn't sufficient for vocal warmth. To be honest, I prefer a set of subs and the dually 10" tops bi-amped.

Jeff, the Carvin DCMs are class A/B if memory serves. I'm not gettin' any younger and could be wrong about this. :)
 
Jeff, the Carvin DCMs are class A/B if memory serves. I'm not gettin' any younger and could be wrong about this. :)

Yup they sure are Fred....I wasnt referring to your gear in the post just in general that there are very few using the A/B s anymore and its unfortunate they are much better amps than any class H

Truth be told the client and the DJ arent that far apart in most cases alot of decesions are based on price
 
This is so true, my friend. The big, beefy A/B amps are expensive and generally not marketed to DJ companies.

From what I understand, Class H amp technology has improved since the early days. Gone is the rail switching noise you'd hear in mid tops. They make for great sub amps and are quite popular with DJ companies.

That said, I'd be leery of running live FOH with Class H amps.
 
Fred,

I agree with you that the plastic cabs just don't offer that warm tone that wood cabinets can.... but how often do you work gigs that can actually hear the difference? Are you getting paid well enough anymore to go though the extra hastle of carrying 110 pound tops?

My thought is that you carry the gear for the gig that will satisfy your clients. You don't need much more in the truck... Brides these days will think the stuff is big and bulky....

Sell the party, not the gear.
 
Thanks, Pete. :)

Actually, the tops weigh in at around 40 lb apiece. Dual 10" 2-ways that can be carried with one hand. I've been carrying em one each hand for years. A bit heavier than two cases of beer... but it works. :D

We've not worked with molded cabs and can't speak from experience there. All I have to go on is reports from compadres who have. The concensus seems to point to birch plywood cabs for the best tone. That said, we have received many compliments on our system tone over the years.

I agree that big and bulky is a no-no for weddings. It's overkill and many B&Gs don't care for the wall of sound. Besides, it's not exactly wedding photo-friendly. :(

We keep the dually 15s in reserve for large shows. They're not really needed at indoor wedding parties. But man, can they shine when the dancefloor needs wall-rattling punch. The cops get called when we run the dually 15s. :)

The weddings we do lately are upscale. Since our semi-retirement we've been a tad selective about the shows we agree to book. They tend to pay well and offer a crowd of guests who wish to party and have a good time dancing. For these, all we need is a bi-amped setup with the tops and a pair of subs.
 
Hey Wolf E! What type of dual 15"s are you running? Well I guess it's Carvin. But what model?
1562, old Club series. :)

The 1562 has been superseded by the LS2153.