I Got The First One In The Country

To many ads? Support ODJT and see no ads!

mp3jrick

New DJ
Sep 26, 2006
149
0
71
After reading about the new releases after NAMM in DJ Times in
February I just had to have one of these.

A wireless system for powered speakers.

Pretty typical bait and wait on these puppies though.
I called every large distributor in the country and nobody had a clue.
Finally I dug deep and found the number for Phonic in Tampa.
So after many back and forths they decided to sell direct to me and I received them yesterday.
Tried 3 times to get a price from PSSL on this and they have no clue, so I paid full retail.

imagethumb.php


http://www.phonic.com/en/product/detail.php?group_name=&languageid=1&group=en&product_no=wmsys4

*
Wireless system for saving the audio cables between your mixer and active speakers
*
Stand-alone UHF wireless receiver, working with any active speakers
*
12VDC external power supply (country dependent)
*
16 user-selectable frequencies
*
RF carrier frequency range: 614-870MHz
*
Operating range: 210 ft. (70m, environment dependent)
*
Indicators for power on, AF and RF
*
Antenna: external, threaded connector
*
Audio output connectors: XLR out
*
Internal squelch and mute circuit mode can resist extraneous noise
*
M6, M8 and M10 screws and velcro strip included to attach receiver unit to any active speakers

There is another model coming with a delay built in, but I plan on setting this up with my drive rack with a delay so that model really didn't interest me.
With a range of over 200' I can put these anywhere there's power now.
 
Tried 3 times to get a price from PSSL on this and they have no clue, so I paid full retail.


If ya don't mind.... how much was that?
 
Dealer cost on it is $260usd, msrp is $355 which is what I paid.
I ordered the kit from PSSL but it was the retro kit for the Sonic Powered Speakers exclusively. Not much good otherwise, so I sent it back.
It too was $355, so I didn't figure waiting any longer was worth it.
I expect to see them for less down the road especially with knock offs, but I needed them now. Plan on using them for a Cancer walk soon to spread the sound around, and 200' of range is gonna help considerably.
 
The work eggselent.
Receivers need xlr or converter plugs.
I am looking for 90 degree xlr adapters to mount them directly to the speakers.

wmsys4.jpg
 
This model doesn't have the built in delay like I said.
It is coming soon I am told.
Extra receivers shouldn't be a problem, not sure if they are available yet.
 
Hate to rain on your parade Rick, but I had mine friday... A couple days before you it looks like.... ;)

I used mine today at a D.A.R.E. Graduation at the local middle school.
We had Sgt. Steve Parker, The voice of McGruff, as a speaker, and he wanted to use my new lavalier mic, of which I knew is much more sensitive to feedback, thus I wanted to get my speakers off the stage, and down the wall a bit to reduce feedback. It worked perfectly!

I did have to turn the volume levels on the back of my Mackies to compensate for lower signal drive however. The recieved signal represents more a mic signal than line level.

I modified my other Mackie to include an outlet like the first in the upper access plate, to supply voltage to the reciever, and then built me a new cable to attatch it to my Mackie while it's velcro'd to the top of it.

http://gallery.otsdjsupport.com/main.php?g2_itemId=584

Here is an image of my modified Mackie, done in 2003...
http://gallery.otsdjsupport.com/main.php?g2_itemId=362
 
I've been using cordless speakers for years.
I know many other mobile DJs that have been doing the same thing with their wireless mic systems into the back of their active speakers.

I don't know much about the Phonic system, but it looks kinda rinky-dink.
Is it dual diversity (2 antennas for each speaker?)
 
More and more like DJ Chat every day....

I've been using cordless speakers for years.
I know many other mobile DJs that have been doing the same thing with their wireless mic systems into the back of their active speakers.

I don't know much about the Phonic system, but it looks kinda rinky-dink.
Is it dual diversity (2 antennas for each speaker?)

You're totally right Bill, totally rinky dink...sorry to bother you.
I hope I didn't upset anybody else with this thread.

L8tr
 
Bill, I've been doing this for a while too!
In fact the modified Mackie speaker was for that porpuse, and as you can see by the date of the image, it was 2003.

The phonic system is not true diversity, but then it doesn't need to be either. Your speakers aren't mobile like you are, and won't be moving 'round the room changing it's dynamics in relation to the reciever. They are stationary. You set them up, and leave them alone.

Yes, it's still possible you can introduce a new factor to the environment that will affect the zone, but then it would probably affect the true diversity unit too.

Not sure why you think it looks rinky dink. It's smaller, and actually designed for this use, unlike an actual Mic system, of which needs batteries to transmit the signal to the over sized reciever perched on top of that active speaker, in addition to the the extra power cord you need to route to it anyhow....
 
I like their idea, but dual antennas would be a better way to go.


I like the idea of 2 antennas, having one as a backup is important. there's nothing worse than having static, hiss, or audio cutting in/out during the bride & grooom's 1st dance. There are too many factors that could cause interference.
 
Understand your concerns, but I'll have to go on record as stating I've never had static or hiss from any of my wireless mic systems... Dropout, yes, but I was also moving round when it occured.

Only time can prove their true capability/reliability.
 
I do plan to check them out...who knows, maybe I'd try it for a ceremony system..well see?

Question: they offer both a stereo & a mono version, what is the difference & the type of applications for using it in stereo or mono? (for one speaker)
 
I do plan to check them out...who knows, maybe I'd try it for a ceremony system..well see?

Question: they offer both a stereo & a mono version, what is the difference & the type of applications for using it in stereo or mono? (for one speaker)

Bill, The stereo system combines the 2 mono transmitters into a single housing basically, sharing only a single wall wart to power both sides. The stereo transmitter also shares the frequency settings for both channels as channel pairs. There is one setting for channel selection on the transmitter, and one on a left, and another on a right reciver, and all must be on the same channel. signal level is adjustable on the transmiter for each of the stereo channels, and there is also a switch on the transmitter to allow you to send stereo, or mono.

Application? well, I suppose you could broadcast in mono to 2 channels, 2 different zones of programming, to 2 different rooms....

I use stereo, as it was intended. I could purchase a mono system with an extra reciever, but I'd then lose my local volume control for speaker balancing.

With 2 mono systems, you'd have an extra wall wart to power the extra transmitter, but you may gain some flexability in channel selections too.... Hard to say without having one myself. With 2 mono systems, you could actually rebroadcastyour signal at the recieve end, and double your range is you so desired... as you can't split a stereo transmitter, this becomes impossible without purchasing another mono system.
 
Jeff, or anyone that has one that has been doing wireless speakers for a while,

What do you get from this system that you didn't get from your previous wireless system.

I use a Lav system with an attachment instead of a mic. Works great. Buta Always looking to improve and would try it.
 
Jeff, or anyone that has one that has been doing wireless speakers for a while,

What do you get from this system that you didn't get from your previous wireless system.

I use a Lav system with an attachment instead of a mic. Works great. Buta Always looking to improve and would try it.

When you say Lav system, do you mean the body pack with a patchcord from the speaker into the body pack (that's what I use) or are you actually using a lav mic?