After reading about the new releases after NAMM in DJ Times in
February I just had to have one of these.
A wireless system for powered speakers.
Pretty typical bait and wait on these puppies though.
I called every large distributor in the country and nobody had a clue.
Finally I dug deep and found the number for Phonic in Tampa.
So after many back and forths they decided to sell direct to me and I received them yesterday.
Tried 3 times to get a price from PSSL on this and they have no clue, so I paid full retail.
http://www.phonic.com/en/product/detail.php?group_name=&languageid=1&group=en&product_no=wmsys4
*
Wireless system for saving the audio cables between your mixer and active speakers
*
Stand-alone UHF wireless receiver, working with any active speakers
*
12VDC external power supply (country dependent)
*
16 user-selectable frequencies
*
RF carrier frequency range: 614-870MHz
*
Operating range: 210 ft. (70m, environment dependent)
*
Indicators for power on, AF and RF
*
Antenna: external, threaded connector
*
Audio output connectors: XLR out
*
Internal squelch and mute circuit mode can resist extraneous noise
*
M6, M8 and M10 screws and velcro strip included to attach receiver unit to any active speakers
There is another model coming with a delay built in, but I plan on setting this up with my drive rack with a delay so that model really didn't interest me.
With a range of over 200' I can put these anywhere there's power now.
February I just had to have one of these.
A wireless system for powered speakers.
Pretty typical bait and wait on these puppies though.
I called every large distributor in the country and nobody had a clue.
Finally I dug deep and found the number for Phonic in Tampa.
So after many back and forths they decided to sell direct to me and I received them yesterday.
Tried 3 times to get a price from PSSL on this and they have no clue, so I paid full retail.
http://www.phonic.com/en/product/detail.php?group_name=&languageid=1&group=en&product_no=wmsys4
*
Wireless system for saving the audio cables between your mixer and active speakers
*
Stand-alone UHF wireless receiver, working with any active speakers
*
12VDC external power supply (country dependent)
*
16 user-selectable frequencies
*
RF carrier frequency range: 614-870MHz
*
Operating range: 210 ft. (70m, environment dependent)
*
Indicators for power on, AF and RF
*
Antenna: external, threaded connector
*
Audio output connectors: XLR out
*
Internal squelch and mute circuit mode can resist extraneous noise
*
M6, M8 and M10 screws and velcro strip included to attach receiver unit to any active speakers
There is another model coming with a delay built in, but I plan on setting this up with my drive rack with a delay so that model really didn't interest me.
With a range of over 200' I can put these anywhere there's power now.