Do You Look Under The Hood?

To many ads? Support ODJT and see no ads!

Do You Look Under The Hood?

  • No

    Votes: 5 100.0%
  • Yes

    Votes: 0 0.0%

  • Total voters
    5

Mr. K

New DJ
Aug 7, 2006
4,215
0
I'm confused, so I just want some numbers.

Scenario:

You have two amplifiers with six-year warranties. Your warranties become void if you open them up. You are also clumsy and afraid to touch things unless it is a last resort. Do you look under the hood?

Thanks.
 
No way

Under those circumstances?

Hell no.
 
Absolutely Not! Clean around the outside with a cloth and call it a day.
 
Thanks, guys--even though I just wanted the empirical data. :)

You may have noticed that this is related to the EQUIPMENT MAINTENANCE thread. Really, I just wanted to know whether or not my fear of opening my amplifier to clean it is justified.

:sqerr:
 
I know V but the circumstances that you are giving are not favorable. I don't have any equipment with a six year warranty. Additionally you need to be very careful when you do pull it apart.
 
Thanks, guys--even though I just wanted the empirical data. :)

You may have noticed that this is related to the EQUIPMENT MAINTENANCE thread. Really, I just wanted to know whether or not my fear of opening my amplifier to clean it is justified.

:sqerr:

I like to add something: Be sure the warrenty covers commerical use.

Case in point at a bar I DJ'ed for a while, the previous DJ blew the tweeters. My boss tells me not to worry just take it down to store it's under warenty. So I unmount it, drag it to the store (consumer electronics, BTW) and get told they won't fix it because it's installed in a "disco"

I'd imagine most of you order from DJ supply houses but it's always a good idea to double check.
 
I periodcally open up my Crown Amp and use compressed air to clean out the dust bunnies.

I also disassemble my lights and clean the interior optics & lenses. You'd be surprised how much difference a clean lens can make.
 
Of course I look under the hood.

[MEDIA]http://rap.midco.net/kpetersen/Gender.wmv[/MEDIA]

Like...

...there's no implication of gender there.
 
Like...

...there's no implication of gender there.

Absolutely not.

However, I DID know that is was only a matter of time before somebody would make such a comment.

And I cannot see your stupid video.

I'll try logging on with Mozilla.
 
Well... I'd like to propose a scenario:

If you don't wish to open your power amps and clean the dirt outta the fan and heat sinks, be prepared for the possibility of thermal shutdown.

Warranty, schmarranty. A warranty ain't nothin' but a piece of paper... and a piece of paper isn't gonna keep these cabs a' thumpin' when it's 100 degrees F out. If an amp goes thermal in the middle of a show due to lack of maintenance, are you gonna pull out that warranty paper and connect it up to your speaker systems?

Personal experience: We bought a used DCM2000 amp on eBay some years ago. The seller was honest about it... said it was going thermal on him and he didn't know how to fix it. Upon receipt of the amp I powered it up with a pair of dual 15s, low level. It seemed to work fine. I noticed that the cooling fan wasn't moving air, though. Well, this could explain the thermal cutout, I figured. Carvin sells replacement fan assemblies for these amps anyhow...

Then I did as Dan suggests ~ I removed the cover for a looksee.

Folks, the area around that cooling fan looked like a huge rat's nest. There was wad of dirt and dust nearly the size of my fist blocking the fan. I started to pull the stuff loose and then went to get a trash bag. I actually picked that amp up, turned it upside down over a trash can and pulled that wad of crap outta there.

Disclaimer: If you're not completely sure of what you're doing, don't try the following at home.

I ensured that the fan was clear and the blade turned freely. Then I powered the amp up on the bench. The fan started up and blew a cloud of dust in the room. (Aw f**k... koff, koff. After 30 years of doing this stuff you'd think I'd know better...)

Opened the utility room door to let the place air out. Stood outside and had a cigarette.

Powered down, unplugged the AC supply cord and proceeded to thoroughly clean that amp 'til it was as clean as a new one inside. I used an old toothbrush dipped in isopropyl to clean the power supply heatsinks, circuit boards and other areas (everything was caked with crap).

I removed the fan assembly and cleaned it thoroughly as well. The blade and venturi had a heavy layer of goo that required a good scrubbing.

We've been running that amp in our system ever since with no troubles whatsoever. It has had the he-double L worked out of it in extreme heat outdoors and run full-bore.

I guess what I'm trying to say here is... yes, cleaning your power amps is a very important part of equipment preventive maintenance. Just cleaning the ouside of the fan housing isn't gonna do it, sorry. The real dirt is inside.

Hope it helps.
 
Is there a seal on the unit? If not, the manufacturer is really only interested in making sure you don’t modify the unit. They really don’t care if you simply blow out some dust bunnies. It’s good for them if the unit doesn’t come back under warranty. Some units have a foam filter that gets the biggest pieces of grunge. Keeping that filter clean (requires a screw driver and soap and water) will go far to extend time before opening the unit. The decision about warranty is a matter of discretion. It is usually left up to the technician that opens the case. I’d be real surprised if Crown, QSC, et al did not want you to open the case to do those minimal maintenance items most especially if you have taken advantage of a six year warranty

After doing a brief check on Crown and QSC, neither made mention of a prohibition on opening the case. Crown excepted intentional abuse This suggests if the problem was accidental even if your fault they would cover it. Both make mention of misuse or improper installation. QSC mentioned they may not be able to help you with a bad sales experience if you buy from an unauthorized retailer. Note: may not. It will be up to their discretion and surrounding circumstances. They didn’t close the door, only indicated they might not be able to help.

NOTE: I HAVE NOT CHECKED WITH THE MANUFACTURER, I ONLY READ THE WARRANTY.

Most of the stuff I’ve worked on before only used convection cooling so I can’t speak knowledgeably about the fan cooled devices. But I’ve worked on many PCs and it takes a tad longer to affect cooling than most people seem to think. Then again, if you don’t put a screwdriver through a printed circuit board it can’t hoit to clean it. Oops, old NY accent commin’ back, I mean hurt.
 
Much to others' dismay, I have PEAVEY amps. The manual clearly states that nobody but an AUTHORISED PEAVEY technician should open the amp; otherwise, the warranty is null and void.

:sad10:

I think that what I am going to do is simply keep a close watch on my fans and, if I feel the need arises, I shall open the amps.

Eh?

Does that sound good?

Thanks guys.
 
I think that after reading some of the earlier posts, I may have to change my attitude on not opening my amp for maintenance..

See, even us old dogs can learn a new trick or two! :D

:thumbsup:
 
Much to others' dismay, I have PEAVEY amps. The manual clearly states that nobody but an AUTHORISED PEAVEY technician should open the amp; otherwise, the warranty is null and void.

:sad10:

I think that what I am going to do is simply keep a close watch on my fans and, if I feel the need arises, I shall open the amps.

Eh?

Does that sound good?

Thanks guys.
Sounds like the proverbial plan to me. Peavey makes a good workhorse amp.

Dust buildup where you can see it is an indication of buildup where you can't see it. I would suggest keeping a watch on the airflow exiting the amps. If you can feel air flowing through the fan (place the back of your fingers close to the fan housing) you should be OK.

That said, Balanced Line makes some very important points here. Pro power amps are business equipment. So are copiers, pizza ovens and the like. Preventive maintenance on business equipment isn't likely to void a factory warranty.

Many amps come with a three-year warranty. A lot of dust can accumulate in an amp over three years depending upon where and how often it is used.

"Factory Authorized" service providers are few and far between. Nobody wants to do it anymore. It's too much work for too little money. Hypothetically, many of 'em backcharge $80.00 for a $15.00 repair just to cover their expenses. Again, in agreement with Balanced Line, if you don't maintain your business equipment properly the manufacturer ends up replacing or repairing it and eating the cost.