Awesome New Powered Speakers from CARVIN

To many ads? Support ODJT and see no ads!

DJ Mad Maxx

New DJ
Dec 5, 2006
59
0
56
Du Bois , PA
www.djmadmaxx.com
I got a pair of these in and they are incredible!!!! Carvins new LM15a 39 pounds powered. CARVINS have no HEAT issues. I've been running carvin powered cabinets for a few years and have never had a thermal shutdown and haven't heard of it ever happening.


LM15A - Molded 2-way 15 inch Powered Loudspeaker/Monitor
Whether you’re a mobile DJ, club musician, or audio professional, Carvin’s LM Series loudspeakers are the workhorse you’ve always wanted. Available in powered and non-powered configurations, the LM Series has the great sound and cutting-edge features that separate you from the competition. Offering premium components housed in lightweight, rugged Polypropylene injection-molded enclosures that maintain their appearance through years of torturous use, the LM Series are 2-way designs featuring lightweight, high efficiency neodymium drivers and a wide dispersion, asymmetrical high frequency horn for maximum coverage. Carvin’s exclusive enclosure design facilitates both vertical and horizontal orientation—making them great for either PA mains or monitor wedges. Equipped with pole cups and suspension points, the LM Series’ are adept for portable PA, or can be permanently installed wherever superior sound reinforcement is required. Carvin''s LM Series— the right tools for the job!

NOT JUST ANOTHER PLASTIC BOX
At first glance, the LM series loudspeakers may look like any other plastic box. However, there are a host of features that separate it from the competition. Many competitor''s products feature inferior or less efficient designs. Listed below are some examples of Carvin’s LM superior features.
• Voiced for mains FOH and monitor applications
• Neodymium low and high frequency components for Lightweight, High efficiency performance
• LM12 features a 2.5” LF voice coil - LM15 3.0" LF VC
• Neodymium 1.5” titanium HF driver for pristine highs
• Asymmetrical wide dispersion horn for greater coverage
• Rugged Polypropylene injection-molded enclosure for extreme durability - drop tested to 8 ft.
• Integrated pole-mount cup for use with Speaker stands or pole mounted on top of a subwoofer
• Suspension points for permanent installation

The LM15A features an internal power amp capable of 350w RMS. The internal active crossover provides a bi-amped signal that is also time aligned to provide greater clarity.
The LM15A also offers a built-in 3 channel mixer. The loudspeaker can be used as part of a large sound system as either a self powered main or monitor, or can be used as a 3 channel stand alone system. The inputs allow for a microphone, guitar and Mp3 player to be connected and played simultaneously. The onboard EQ provides fine tuning of the entire mix. There is even a balance XLR output that can pass through the incoming signal from Channel 1or the 3 channel mix to an additional LM12A for greater coverage.

LM15A POWERED FEATURES AT A GLANCE
-350w Bi-amped and time aligned for greater clarity
- 3 channel stand alone system operation for mic, guitar, MP3 player
- Balanced XLR line or mic input and output for daisy chaining
- 3 band EQ with mid sweep for fine tuning as a main or monitor
- Dedicated instrument EQ setting on channel 2



List: $895.00
Direct: $ 429.99
shipping: $ 29.99





Technical Specs

Freq. Resp.: 55 Hz to 18 kHz ±3 dB
Useable LF: 44 Hz (-10 dB)
Sensitivity: 99 dB SPL, 1 Watt @ 1 meter
Impedance: 8 ohms
Bi-Amp: Low Freq. 300Wrms, High Freq. 50Wrms
Power Handling: 475w continuous, 950w peak
Coverage Angles: 90° Horiz., 30°x45° Vert.
Protection Circuits: Speaker Guard™
Inputs: XLR, 1/4 inch and RCA
Enclosure Type: Vented
Enlosure: Polypropylene
Suspension mounts: Four points
Dimensions: 17.875”W x 13.875”D x 27.875”H
Net Weight: 39 Lbs.


http://www.carvin.com/products/singl...r=LM15A&CID=LM

it also comes in 12" powered:sqwink:
 
Congrats!!!
 
yes i do,

Cam, anyone can blow up ANY speaker in 2 minutes if they wanted to. Carvin is an outstanding brand that gets alot flack from retailers only because they CAN'T sell them and they haven't heard them
 
Yo Wolf! What do you think of these boxes? I know your a Carvin man but I don't think you will approve of the plastic cabs. The specs look pretty decent.
They are what they are. Small house PA/stage wedges.

True, I do not care for plastic cabs... they look like snot in a wind tunnel. Plastic is for toys, lol. I prefer the look and tone of birch cabs but that's just me.

That said, the LM line is Carvin's version of the Eon and Mackie. They're imported and I've read of some cooling fan placement issues in the active versions. As I understand, the fan issue has been fixed. No line item thermal issues that I am aware of... just a few isolated incidences that Carvin handled via replacement. For the overall cost, they ain't bad. :)

Hope this helps.
 
The Eon G2's are getting discounted heavily......looks like they are in a closeout mode because of the new PRX series.

One thing that makes the Eon 15 G2's a better deal (especially because they're only $100 more apiece).....

LF response on the JBL cabinets is about 1/2 octave lower. (Compare the -10 db and the -3 db spec on the lowest frequency)

I've noticed the difference when I've used the Eons by themselves without a subwoofer.