So, It Looks Like I just bought a Laptop... Now What?

To many ads? Support ODJT and see no ads!
Aug 9, 2006
2,367
8
51
Phoenix, AZ
Just wanted to know if anybody has a Rack Mount Stand for a Laptop

I am currently using a 10x2 Slanted Gator Case
I Would like to have the Laptop Angled off to the Side of the Case
Anybody seen this, or anything like this?
 
So here is my current Console
And would like the laptop to come off the Side somehow? 1U available
 

Attachments

  • dj1.jpg
    dj1.jpg
    26.1 KB · Views: 45
  • dj2.jpg
    dj2.jpg
    36 KB · Views: 45
Here's a couple of things I've done...

The first one is a laundry bag hanger from a hospital supply store and the second one, I made and wing nutted to the side of my case.
 

Attachments

  • back of setup.jpg
    back of setup.jpg
    94.7 KB · Views: 2
  • Shelf.jpg
    Shelf.jpg
    35.2 KB · Views: 2
Al - buy 2 of these:
http://cgi.ebay.ca/Universal-Mount-...emZ180079110784QQcategoryZ48694QQcmdZViewItem

Put a 2 u heavy duty palte in your rack.....assemble the two together so that you have the large mount at each end (you may have to drill out a threaded section......ideally tyou want a base, 2 long pieces and a base. With the swivelling knucle at each end and the articulating arm, you'll bra ble to adjust it to how you want it....the base is wide enugh; it lines up with the holes in the side rail...just screw the other two in the spacer plate...
(Search out ; I've posted a photo somewhere of my rig.)

Now you need a holder for the laptop; I used a pice of a deskset from staples; the stackable letter holders...I found one that's metal, with 3 sides...fits my tablet perfectly. You could get a piece of sheet aluminum, bent; a music stand amy work...You can strap the laptop down.....

I built two wings, one for my laptop on the right, one on the left for the xtra mixer (if IO have to run xtra mics......

I'll try to find some photos....

Revised set up - Our DJ Talk - DJ Help and Resources Chat!

System Pictures - Page 8 - Our DJ Talk - DJ Help and Resources Chat!


you gert the idea...I can post some cloe ups as well
 

Attachments

  • staples_std.jpg
    staples_std.jpg
    5.6 KB · Views: 27
  • IMG_0645A.jpg
    IMG_0645A.jpg
    88.8 KB · Views: 1
  • IMG_0644A.jpg
    IMG_0644A.jpg
    64.3 KB · Views: 0
  • IMG_0641A.jpg
    IMG_0641A.jpg
    92.5 KB · Views: 2
Huge thanks Steve.

I having my Brother in Law build me a rack support simular to the
Furman Lite I have (Shown Below)

Then we (more he) will make an Arm simular to the one you have!!!!!

btw - we are also building me a new BBQ (Oil Drum)!
 

Attachments

  • furman.jpg
    furman.jpg
    7.9 KB · Views: 1