So we got to run our homecoming setup over the weekend, which consisted of 4 totems with the totems on the stage being connected by a 10’ piece of truss horizontally.

On top of each of the totems we got to use our 60 watt LED moving heads (Chauvet Q-Spot 260) Man those things are great! Love those lights! We also uplight (and side lit the horizontal) truss. Man having those lit up put out a lot of light and looked GREAT!

Each of the totems that were on the gym floor on each side of us we use a strip of tubing to make a “T” bar style setup so we could hang 2 Blizzard Q6’s as wash lighting.

With the 4 Blizzard Q6’s washing the gymnasium was incredible, it was almost at the point we needed to dim the fixtures because they were making the gym too bright. On the main rig on the stage we also have 4 Chauvet Colorstrips. We would alternate back and forward with the washlighting in the room b/c with it all on it was too much. But at the same time, if there was to be a problem going on, we have a scene set to make all the lights “White” to REALLY light up the place!
We ran our two Yorkville LS801PB’s coupled in front of the stage… AND HOLY JESUS, those things THUMP. I have never heard bass like this before! It was insane, at one point during sound check I walked out side the gym and it was vibrating the gymnasium’s door. We also ran 4 tops with this setup. Man it sounded AMAZING! My ear were ringing the day after!


The power was a challenge with this venue; we were told that they have 20amp drops, well the day before I was informed they were only 10amp drops. So we have to run some drops from different outlets to make it work, but we got it done.
The rig itself was a wiring nightmare. It took us around 5-6 hours to get it all setup and wires. In all fairness we were down one roadie though. It also took 3 hours to break down and pack up! Our prom rigs which consist of a 30’ rig overtop of the dance floor with 6-8 moving heads and wash lighting only takes us 3-4 hour to setup and 1 and a half hours to tear down and load up. This rig was unique and looked awesome, but I don’t think we will be running this rig that often. Specially not down a roadie.
Music wise we stuck between the 120BPM – 130BPM marker, have the normal group of students complain I wasn’t playing enough hiphop, but this school has a no nonsense principal, who made it clear a year ago when he hired me for prom, that he had no problem unplugging me if I got out of control with music. So the hiphop we did play they were uptempo’d versions. And when we did go down into the 75-85BPM hiphop the dancing was out of control and you could see all the admins and chaperones storm the crowd of 1200 students so we just made our way back up to faster BPM’s. but the other 1190 students loved it and had a great time!
So… now with the “Uh Oh” of the night. So as we were breaking the rig down, we started finding washers all over the floor… following by about 5 one inch bolts… that we vibrated from something from the ceiling! The custodian’s also found a chunk of mason mortar that had come loose from the ceiling and fell on top of the bleachers… I’m very thankful that even though I’m sure our bass didn’t loosen a tighten bolt, they had to be about ready to fall and they fell at some point during the night, but a big one inch bolt falling from a 50’ ceiling could have seriously hurt someone, and I don’t want to imagine the concrete!
Then the lighting fixtures in the ceiling all the plastic covers that covered the mounting hardware, came off.

[video=youtube;G10qP4JVopI]http://www.youtube.com/watch?v=G10qP4JVopI[/video]
[video=youtube;KENyjUPT7HM]http://www.youtube.com/watch?v=KENyjUPT7HM&NR=1[/video]
I’m looking forward to our prom season! We just sent out a huge batch of flyers!

Our prom rig we are going to run a 40’ truss run (just need to talk with Global Truss and make sure that is safe per their specs. We also are going to be ordering the ST-180 crank stand tomorrow, those can go up to 18’ and support 440lbs per stand! We should be getting a lot more truss and lighting in our future. A few years ago I starting DJ for a bar manager who wanted to build a radio station, so we became friends and I helped him b/c he’s a good guy, and did a lot of coding and designing for him, well he was consulting for a local MMA company and he got me in with them to do lighting and sound for them. Well he just bought the company, and part of our deal is he is helping with the expansion of JJDJ, they are picking up part of the cost for the crank stand and im still being paid for events. Just goes to show that some people you help out, out of the kindness of your heart, remember those kind of things. Another thing they are doing for me as well is buying more trussing and lighting that will essentially be owned by my company so I can use them for all our events. His motto is if it makes their events better and I can use the gear for myself, they will purchase it for me, and I’d pay for part of it and my company would own it!
Anyhow leave your comments and questions below, and if you could become a fan of our facebook page at Facebook.com/JJDJEntertainment

On top of each of the totems we got to use our 60 watt LED moving heads (Chauvet Q-Spot 260) Man those things are great! Love those lights! We also uplight (and side lit the horizontal) truss. Man having those lit up put out a lot of light and looked GREAT!

Each of the totems that were on the gym floor on each side of us we use a strip of tubing to make a “T” bar style setup so we could hang 2 Blizzard Q6’s as wash lighting.

With the 4 Blizzard Q6’s washing the gymnasium was incredible, it was almost at the point we needed to dim the fixtures because they were making the gym too bright. On the main rig on the stage we also have 4 Chauvet Colorstrips. We would alternate back and forward with the washlighting in the room b/c with it all on it was too much. But at the same time, if there was to be a problem going on, we have a scene set to make all the lights “White” to REALLY light up the place!
We ran our two Yorkville LS801PB’s coupled in front of the stage… AND HOLY JESUS, those things THUMP. I have never heard bass like this before! It was insane, at one point during sound check I walked out side the gym and it was vibrating the gymnasium’s door. We also ran 4 tops with this setup. Man it sounded AMAZING! My ear were ringing the day after!


The power was a challenge with this venue; we were told that they have 20amp drops, well the day before I was informed they were only 10amp drops. So we have to run some drops from different outlets to make it work, but we got it done.
The rig itself was a wiring nightmare. It took us around 5-6 hours to get it all setup and wires. In all fairness we were down one roadie though. It also took 3 hours to break down and pack up! Our prom rigs which consist of a 30’ rig overtop of the dance floor with 6-8 moving heads and wash lighting only takes us 3-4 hour to setup and 1 and a half hours to tear down and load up. This rig was unique and looked awesome, but I don’t think we will be running this rig that often. Specially not down a roadie.
Music wise we stuck between the 120BPM – 130BPM marker, have the normal group of students complain I wasn’t playing enough hiphop, but this school has a no nonsense principal, who made it clear a year ago when he hired me for prom, that he had no problem unplugging me if I got out of control with music. So the hiphop we did play they were uptempo’d versions. And when we did go down into the 75-85BPM hiphop the dancing was out of control and you could see all the admins and chaperones storm the crowd of 1200 students so we just made our way back up to faster BPM’s. but the other 1190 students loved it and had a great time!
So… now with the “Uh Oh” of the night. So as we were breaking the rig down, we started finding washers all over the floor… following by about 5 one inch bolts… that we vibrated from something from the ceiling! The custodian’s also found a chunk of mason mortar that had come loose from the ceiling and fell on top of the bleachers… I’m very thankful that even though I’m sure our bass didn’t loosen a tighten bolt, they had to be about ready to fall and they fell at some point during the night, but a big one inch bolt falling from a 50’ ceiling could have seriously hurt someone, and I don’t want to imagine the concrete!
Then the lighting fixtures in the ceiling all the plastic covers that covered the mounting hardware, came off.

[video=youtube;G10qP4JVopI]http://www.youtube.com/watch?v=G10qP4JVopI[/video]
[video=youtube;KENyjUPT7HM]http://www.youtube.com/watch?v=KENyjUPT7HM&NR=1[/video]
I’m looking forward to our prom season! We just sent out a huge batch of flyers!

Our prom rig we are going to run a 40’ truss run (just need to talk with Global Truss and make sure that is safe per their specs. We also are going to be ordering the ST-180 crank stand tomorrow, those can go up to 18’ and support 440lbs per stand! We should be getting a lot more truss and lighting in our future. A few years ago I starting DJ for a bar manager who wanted to build a radio station, so we became friends and I helped him b/c he’s a good guy, and did a lot of coding and designing for him, well he was consulting for a local MMA company and he got me in with them to do lighting and sound for them. Well he just bought the company, and part of our deal is he is helping with the expansion of JJDJ, they are picking up part of the cost for the crank stand and im still being paid for events. Just goes to show that some people you help out, out of the kindness of your heart, remember those kind of things. Another thing they are doing for me as well is buying more trussing and lighting that will essentially be owned by my company so I can use them for all our events. His motto is if it makes their events better and I can use the gear for myself, they will purchase it for me, and I’d pay for part of it and my company would own it!
Anyhow leave your comments and questions below, and if you could become a fan of our facebook page at Facebook.com/JJDJEntertainment