Restaurant Lightshow

To many ads? Support ODJT and see no ads!

Jorge Orwell

New DJ
Aug 11, 2011
9
0
70
I would imagine someone here can answer this question for me.

Below is a link to a YouTube video showing a restaurant that has a slow rainbow-colored sweep in their rear wall. They have synchronized light strips at the floor and ceiling levels behind their rice paper wall. Could some please tell me how they are doing this? I've been trying to find out for some time now. Here's the video:

The Rainbow Flag Wall - LED Light Show:
http://www.youtube.com/watch?v=c-4mF89ZXRM


Second question:

After you see the short video, can someone tell me if the Chauvet colorstrips can do this same pattern of a slow rainbow-colored sweep?

I have one Chauvet colorstrip and one Chauvet colorstrip mini (in master/slave) connected to a Chauvet Obey 4 DMX controller (the controller was a mistake purchase I have since realized because, for example, the controller does not show me any numbers for the colors...it's pretty much Chauvet-created macros).

I've been experimenting with the DMX controller and the colorstrips since the Spring of this year and I've not been able to get the colorstrips to do this slow color sweep. The colorstrips will fade in and out of colors (it's a Chauvet-created macro), and I can adjust the speed of that in-and-out of colors fade, but it's not the same effect as what I'm looking for and what they are using in this restaurant.

Thanks in advance for your help. I will appreciate it.
 
You can't do it with the controller you own. At least least I don't think it's possible. You need a controller you can create a squence of scences that will create the desired effect. Think of DMX programming as animation.

Scene 1

Light 1 Ch1 = Red Light 2 Ch4= Orange Light 3 Ch7 = Green Light 4 ch 10 = Blue Light 5 ch 13 = Purple

Scene 2

Light 1 = Purple Light 2 = Red Light 3 = Orange Light 4 = Green Light 5 = Blue


Scene 3

Light 1 = Blue Light 2 = Purple Light 3 = Red Light 4 = Orange Light 5 = Green



Then you create the rest of the scenes. Once you have the 5 scenes you can loop them into a program, adjust the timing and the fade.
 
You can't do it with the controller you own. At least least I don't think it's possible. You need a controller you can create a squence of scences that will create the desired effect. Think of DMX programming as animation.

Scene 1

Light 1 Ch1 = Red Light 2 Ch4= Orange Light 3 Ch7 = Green Light 4 ch 10 = Blue Light 5 ch 13 = Purple

Scene 2

Light 1 = Purple Light 2 = Red Light 3 = Orange Light 4 = Green Light 5 = Blue


Scene 3

Light 1 = Blue Light 2 = Purple Light 3 = Red Light 4 = Orange Light 5 = Green



Then you create the rest of the scenes. Once you have the 5 scenes you can loop them into a program, adjust the timing and the fade.


Thanks for your reply. You referred to "Light 1, Light 2, Light 3, etc." Are you referring to the lights inside each light strip fixture or are you referring to multiple, separate light strip fixtures for each individual color. I only have two Chauvet colorstrip fixtures (a long one and a short one).

The DMX controller I have is very limited. I had originally thought it would do what a "standard" DMX controller is supposed to do.

Which DMX controller do you think is the best? I've heard the best one is Chauvet's ShowXpress, although that one is quite expensive it looks like.

Thanks for your help.
 
You can not do that effect on a large scale inside (so to speak) one fixture.
Each fixture is set to one color, and each one fades to the next color in the sequence. So three lights set to Red, White, Blue; would fade to Blue, Red, White; then to White, Blue, Red; then start over. If the fades are exactly the same, it will create a motion effect. This is an over simplification, the effect is much better when done with multiple fixtures grouped into colors with the leading and trailing fixtures of each group fading into (leading) and out of (trailing) the next color in the sequence.

Chauvet's ShowXpress is a free program, what you pay for is the hardware necessary to connect your computer to your lights. The least expensive option, I believe, is just under $300.
 
The Colorrail (or the American DJ strip lights) can address each cluster of LED's individually and do the very smooth effect in that video...the Colorstrips cannot. Only the built-in programs can control each cluster. You'd have to do what DJ Cam said and have each fixture light in sequence.

There is a program that does a 'rainbow' chase on the Colorstrip, and if you have them in M/S it will run across multiple fixtures...it won't look as nice as the one in that video though.
 
The Colorrail (or the American DJ strip lights) can address each cluster of LED's individually and do the very smooth effect in that video...the Colorstrips cannot. Only the built-in programs can control each cluster. You'd have to do what DJ Cam said and have each fixture light in sequence.

There is a program that does a 'rainbow' chase on the Colorstrip, and if you have them in M/S it will run across multiple fixtures...it won't look as nice as the one in that video though.


Thanks Whines. Are you talking about the Chauvet Colorrail? (I don't see an American DJ fixture called Colorrail.)

http://www.chauvetlighting.com/colorrail.html


Since I would like to have what this restaurant has, I would need to get the Chauvet Colorrail?

And the colorrail would do this slow sweep in stand alone? Or would it require a new DMX controller (instead of my very limited Obey 4)?

Thanks.
 
Look at your fixtures settings. There are different DMX modes where each segment of the light can be broken down. I have colorpallets they can be broken down to 8 separate segments.


Thanks for replying. If I'm understanding you correctly (I don't know too much about DMX unfortunately), are you talking about looking at my fixture settings within a DMX software program? I have no way of seeing the fixture settings (other than the address numbers I gave them on the back of each fixture and they are both currently set on number 1 so they are synchronized when connected to the Obey 4 controller). I have no color palette, unfortunately. I'm using the Obey 4 (by Chauvet) board/DMX controller which does not show me any of that. It does not even show me the numbers for colors.
 
Look at your fixtures settings. There are different DMX modes where each segment of the light can be broken down. I have colorpallets they can be broken down to 8 separate segments.

Not on the Colorstrip, unfortunately. On other strip lights that I've looked at, yes, but not the Colorstrip, which is 4-channel only.
 
Thanks Whines. Are you talking about the Chauvet Colorrail? (I don't see an American DJ fixture called Colorrail.)

http://www.chauvetlighting.com/colorrail.html


Since I would like to have what this restaurant has, I would need to get the Chauvet Colorrail?

And the colorrail would do this slow sweep in stand alone? Or would it require a new DMX controller (instead of my very limited Obey 4)?

Thanks.

Yes, the Chauvet ColorRail. The American DJ Megapixel can also do that you want, I think, it has a lot more DMX options than the Colorstrip.

I'm not familiar with the macros that come built in to the ColorRail....perhaps watch some demo videos and see if it does what you're looking for? You could definitely do it with a (proper) DMX controller and some patience though.
 
The Colorrail (or the American DJ strip lights) can address each cluster of LED's individually and do the very smooth effect in that video...the Colorstrips cannot. Only the built-in programs can control each cluster. You'd have to do what DJ Cam said and have each fixture light in sequence.

There is a program that does a 'rainbow' chase on the Colorstrip, and if you have them in M/S it will run across multiple fixtures...it won't look as nice as the one in that video though.
I think this is the fixture they are using! The Color rail.
 
I think this is the fixture they are using! The Color rail.

After doing more research, I don't think they're using this fixture. They are using one very much like it, but an older one. According to the manual for the Colorrail that fixture didn't come out until November 2010, and this restaurant has had their LED wall since they've been open which is about 4 years.

I've written to Chauvet asking whether the Colorrail can do this particular restaurant scene without a proper DMX controller. In stand-alone mode in other words. That's still my question. I would guess it can do this scene with a controller, but that would cost more.
 
You cant build a BMW with Yugo parts. That effect cost money and even with todays cheaper components you will need a proper controller to make magic. Good Luck.
 
I was wondering what people here would recommend for my particular situation.

I have two Chauvet colorstrips (one is a mini and they are connected M/S). I suspected sometime ago I needed a proper DMX controller to do what I want the colorstrips to do. I'm going to assume that the Chauvet colorstrips I currently own will do the slow rainbow color sweep in the restaurant (see YouTube video) WITH a proper controller. Is it correct for me to assume that? I contacted someone on YouTube who has the Chauvet Colorrail and that person said that fixture will do that sweep and he uses it often, but only with a proper DMX controller. The Colorrail will also do that sweep in stand-alone mode but not consistently. In order to get those colors and that speed as a scene, the controller is needed he said. I'm not sure yet what controller this person is using. I'm waiting to hear from him on that.

What I'm looking at is the Chauvet ShowExpress software, which is free. I'm unclear on what connects to that. Is it the Chauvet Xpress 100 USB to DMX Interface with ShowXpress (which is really just an expensive cable) or the Chauvet XPRESS-512 DMX USB Interface (the box)? Or do I need BOTH? This project is very small (for home use only) with just the two colorstrips shining on two walls. So I don't want to buy unnecessary equipment that's way more than what I need and will just be a waste of money (too big for my needs). Two things I especially would like to have is a primary yellow from the colorstrips and the slow rainbow sweep.

So based on this, does anyone have any suggestions on what I need to get (specifically equipment) to do what I've said I'd like to do with the colorstrips. Thanks for your help.
 
Don't mess with chauvet, or sunlite, or das light, or light jockey, or any of that.

Freestyler DMX is the most full featured DMX software out there. It's free, and the dongle is only like $50. Freestyler has become so popular in fact that all of the other software companies are now advertising their software as free as well. Unfortunately, you need a seriously costly dongle to run them.

Many heavy hitters, including one of pink floyd's designers have moved to freestyler. I know several large production houses have dumped hardware controllers in favor of Freestyler as well. The most expensive hog, or Grand Ma can't do what freestyler does.

The Only people who talk badly about freestyler, are those who sell other softwares, and don't want to lose a sale, and those who spent big bucks on some other software, and are simply hating on anything that does what theirs does , but even better, and for free.

I know more people on freestyler than any other software as well, so between about 50 of us, we share fixture files, scenes, and designs.

You can't go wrong!

I'm not trying to speak badly of anything else out there, but it is incomprehensible that someone would want a hardware controller, or less powerful software at a higher cost, when such a simple, intuitive, and frequently updated and improved exists.

I can duplicate that effect in about 2 minutes with 4-6 of any rgb fixture.. even color splash Jr's. In fact, I have done that effect.
 
Don't mess with chauvet, or sunlite, or das light, or light jockey, or any of that.

Freestyler DMX is the most full featured DMX software out there. It's free, and the dongle is only like $50. Freestyler has become so popular in fact that all of the other software companies are now advertising their software as free as well. Unfortunately, you need a seriously costly dongle to run them.

Many heavy hitters, including one of pink floyd's designers have moved to freestyler. I know several large production houses have dumped hardware controllers in favor of Freestyler as well. The most expensive hog, or Grand Ma can't do what freestyler does.

The Only people who talk badly about freestyler, are those who sell other softwares, and don't want to lose a sale, and those who spent big bucks on some other software, and are simply hating on anything that does what theirs does , but even better, and for free.

I know more people on freestyler than any other software as well, so between about 50 of us, we share fixture files, scenes, and designs.

You can't go wrong!

I'm not trying to speak badly of anything else out there, but it is incomprehensible that someone would want a hardware controller, or less powerful software at a higher cost, when such a simple, intuitive, and frequently updated and improved exists.

I can duplicate that effect in about 2 minutes with 4-6 of any rgb fixture.. even color splash Jr's. In fact, I have done that effect.


Hi Steve. Thanks very much for your response. Very helpful. What do you think about this dongle (for $60) for working with Freestyler?

http://www.enttec.com/index.php?main_menu=Products&pn=70303&show=description&name=opendmxusb

(There's also a "pro" version there for $151.)
http://www.enttec.com/index.php?main_menu=Products&pn=70304&show=description&name=dmxusbpro

Which of these do you recommend? Or is there another one you'd recommend?

Thanks again.
 
Anyone have an opinion on this dongle issue? (See my previous post). I suppose the more expensive "pro" dongle may be the better dongle. True? Or is the $60 dongle sufficient? Thanks.
 
George did you read The post above you by Steve Lynch? He answers your question with credibility.
 
I thought I would post this for anyone in the future who is in need of additional information about dongles.

There are many dongles on the market. How does one choose a good dongle? I had been hoping someone here would recommend a brand name based on their experience using a dongle. That was the reason I had written a previous post about that, which no one answered as far as giving me a brand name based on their experience using a dongle.

There are the two dongles I gave links to above in a previous post. From additional research, many people have had problems with the $60 Enttec dongle. I've found no one having a problem with the pro version of that same dongle. So I will get the pro version even though it's more expensive than the $60 dongle.

As for accessories for the dongle, I have no information about that and will ask about that elsewhere, so as not to bother anyone on here. Hope this helps someone in the future.

Jorge
 
George
I believe someone mentioned Entec.................... But I know for a fact the software of choice was mentioned a simple google search would reveal what dongles work with Freestyler.