Middle School Dance - March 9th

To many ads? Support ODJT and see no ads!
does the hazer really not set off alarms. I didn't think their were any hazers that NEVER set off alrms this is my biggest problem with bringing a hazer other wise every event would have one.

A hazer, like a fogger, puts particles in the air. The reason a hazer may not set off a detector is that the particle size is much smaller. It still may set off an alarm, depending on the sensitivity and how much you use, etc. Some people have good luck just running a hazer lightly, but you should know it is still a risk.

We just do not use fog or haze if the alarm system has particle detectors. We have enough [powerful] lights that it's not a big deal (though I like to use fog when I can).

cbarron--looks like probably a 9x12 screen. I'm sure Marek will check in again to confirm....
 
Hazers will set them off, I just think that they have a lower percentage of chance of doing it.

I use mine, unless the room says don't use smoke, I know it's not smoke, but I'm not going to take the chance... :)
 
how do you know if the venue has particle sensors?
 
Marek,

Nice set up and videos... looks awsome! Hope I can bother you for a few questions...

what controaler do you use to run your lights... and do you do the programing yourself. Can you activate the strobes on the fly, or did you program them into the sean, set to the music.. YMCA?

Also, regarding the trussing... It looks like there is a bit of saging in the middle on one of the pictures... but it is carying a lot of weight... have you had any problems with it saging? or is it just the way Im seeing the picture. Im seriousaly considering that Tri trussing.

Thanks soooo much...
Scottie :sqbiggrin:
 
Scottie, I was waiting to see if you noticed the slight sag in that one photo, he does have a lot of weight on it though... He is running separate strobes, my guess is that they are DMX and he just uses the trigger button on his board. I have stayed away from strobes because of the fact that they can possibly trigger an epileptic seisure. One of my best friends is epileptic so I take it quite seriously. I checked my emaila and there is a 3 month wait on the trussing, not 2.
 
Nice setup. What lighting controller are you using? I noticed during your YMCA song the lights change colors etc right exactly with different spots in the song. Are you just hitting a different scene each time, or are they programmed some how?
 
what does those look like. I worked on a theater performance recently. It was Les Mis and we had a high power hazer that would set off the alarm if placed right under the sensor. It looked like a regular smoke detector and not the particle sensors that are pictured above which is what concerns me: not being able to tell if the particular sensor will set off an alarm and I dont want to take any chances.
 
...which is what concerns me: not being able to tell if the particular sensor will set off an alarm and I dont want to take any chances.

Then don't use any haze or fog. We all know that it makes the lighting look better, but in the great grand scheme of things it usually is not worth the headache for the people in charge of the dance (and setting the alarm off will not help your chances of being hired back at that school)
 
Hello Everyone,

Sorry for the late reply to all the posts.. we were in Montana all weekend as our prom season kicked off this Saturday.

does the hazer really not set off alarms. I didn't think their were any hazers that NEVER set off alrms this is my biggest problem with bringing a hazer other wise every event would have one.

It does depend on the type of fire alarm in each school. There are a few schools in the area where we don't use haze or fog due to the alarm system.. Just make sure you clear this with the dance advisor and principal.. Its never been a big problem for us.

stupid question.....what size screen is that?

The size of the screen is 7.5' x10' from ScreenWorks at $730.00. The black trim kit was $240.00.

what controaler do you use to run your lights... and do you do the programing yourself. Can you activate the strobes on the fly, or did you program them into the sean, set to the music.. YMCA?

We are using the Show X-Press USB100 from Chauvet. I programed all the scenes and shows myself.. one day we setup everything in a big gym and just programed shows into the computer for about 12 hours.. Basically each DMX show is activated by hitting a letter on the laptop keyboard.. (Q=All Off, W=Strobes) so we can trigger any type of effect by hitting the corresponding key on the laptop.. during the YMCA I was triggering the strobes and different shows manually..

No point in using DMX if you cant take full advantage of its capabilities!

Also, regarding the trussing... It looks like there is a bit of saging in the middle on one of the pictures... but it is carying a lot of weight... have you had any problems with it saging? or is it just the way Im seeing the picture. Im seriousaly considering that Tri trussing.

Yes it does sag.. we are actually slightly over the weight limit for the stands and the truss connection sleeves are a little worn too.. There is some sag but its never caused a problem.. I think once we replace the sleeves it will go away.

I did notice.... what about this truss I found on American DJ. it looks similar, but not in black..

http://www.americandj.com/product.asp?ProductIDNumber=1502&cat=Stand_Systems

I’m only posting this here, to see if anyone has experience with this on.

Thanks.

This one is actually a little different than the one we are using. Notice in our setup the triangle points down and in the American DJ Setup the triangle points up.. We considered this but liked the way the black trussing created a flat surface on the top of the trussing.. great for the MultiStar Centerpiece and the moving heads..

and setting the alarm off will not help your chances of being hired back at that school

Funny you should say that.. In the past 2 years we've set off the fire alarms in 4 different schools in the area as a result of the Hazer. All of them just asked that we not use the Hazer anymore and thought noting major of it. All 4 schools still call us for their dances on a regular basis..


Hope that answers all the questions..
 
As i mentioned above our prom season kicked off this weekend in Montana. 60 couples.. 120 students in attendance. We video taped grand march and displayed it live as it happened on the video screen. The two spot lights you see on the students were two AccuSpon2 Fixtures on top of our speakers (pictured below). This was a huge hit.

The dance was about 3 hours and the result was fantastic. The principal counted the number of students as they left when it was all over.. 108 students stayed till the last song.. to our surprise we only lost 12 of them. School was very happy with our performance.. Principal and Prom Advisor said "See you guys next year" as they hinted to a repeated booking..

Here's a quick video I put together.. sorry its sloppy and lacks transitions.. just there to give you an idea of how things went.

If anyone has any questions please refer to the TIME CODES in the video (i.e. - What was that dance you did at 2:52?)

[yt]xDLEmgiHFS8[/yt]


Here's the setup pictures..

mt_prom1.jpg


mt_prom2.jpg


mt_prom3.jpg
 
you need to lower the volume on the internal mic of your camera. then you can raise it again after fimling in your video editing software and it is clear and not distorted, like it is in that video, from the music being too loud for the camera's mic to record properly.

quick question for you....what amps do you push those MRX cabs with?
 
you need to lower the volume on the internal mic of your camera. then you can raise it again after fimling in your video editing software and it is clear and not distorted, like it is in that video, from the music being too loud for the camera's mic to record properly.

Yeah will do thanks.. Like i mentioned I just threw the video together quickly to give everyone an idea of the night..
 
I thank you for that. I was just saying that with a quick adjustment the next time you film you will be a lot happier with the video.