Problem: What is a good Mixer for Karaoke/DJ Combined?

To many ads? Support ODJT and see no ads!

DJ Gray

New DJ
Oct 25, 2006
2,099
2
18
I , as some of you know will be embarking on adding Karaoke to my "bag of tricks", here shortly.

I have set-up a seperate Rack just for Karaoke equipped as follows:

Odyessy Rack (with wheels)
Voco-Pro cdg player model 8000
Voco-Pro model 7800 Mixer
DBX 2223XL Crossover
Furman Power Conditioner
Hisonic Dual Wireless Mics (Have not installed in rack yet)

The reason for the selection of the Voco-Pro items was the Mixer primarily, it has a Digital Key Controller, Delay, and Echo.

Problem.....it's only a four channel mixer, I know I am going to have need for more than 2 mics at a given time......will my current Mixer allow me to add additional mics, how? Also I am going to have to run a Mini disc player into mixer, won't that require its own channel? So I have 2 channels for CDG player, 1 channel for Mini-Disc Player, and 1 channnel for Wireless mics..........I'm out of channels, how do I add more mic channels? New Mixer?.....Set-up this way there's no mic channel for me?...??

Help......
 
Your best options would be:

Yamaha MG 16/4 This is what I use.They make a version with or without effects.

http://tinyurl.com/33cjyz (pssl)

Mackie 1402

http://www.musiciansfriend.com/product/Mackie-1402VLZ-PRO-Compact-Mixer?sku=634221

Mackie 1642 If you want something bigger.

http://www.musiciansfriend.com/product/Mackie-1642VLZ-PRO-Mixer?sku=634261

I don't know what Mackies are rack mountable. I have the Yamaha I use an Alesis Midiverb 4 for effects. The effects on the Yamama are very nice should you decide to get the version with effects. The Yamaha comes with rack rails and fits in a standard 12 space rack case.

I would buy one of these Pro Mixers and send back the Voco-pro one.

My Setup

Channels:

1 - DJ Mic
2 - Wirelless#1
3 - Wireless #2
4 - Wireless #3
5 - Wireless #4
6 - Reverb Level
7 - Empty
8 - Empty
9 / 10 - Sound Card #1
11 /12 - Sound Card #2
13 / 14 - iPod
15 / 16 - CD Player

I use 14 out of 16 channels when everything is hooked up.
 
Jim,

You have 8 channels already in the MD unit, and there my friend is your mixer. Run the DJ mixer into the MD.

Tell me exactly what you have and what you want to achieve.

Ok I just reread your post sorry!

Set it up as I posted above Key changer for players will still be functioning on Vocopro plus mics into two channels on MD unit, you still have a dry mic or two or three on the MD plus you can record and/or playback at the same time.

And you still have a couple of available inputs as well.
 
Your best options would be:

Yamaha MG 16/4 This is what I use.They make a version with or without effects.
http://tinyurl.com/33cjyz Mackie 1402

http://www.musiciansfriend.com/product/Mackie-1402VLZ-PRO-Compact-Mixer?sku=634221

Mackie 1642 If you want something bigger.

http://www.musiciansfriend.com/product/Mackie-1642VLZ-PRO-Mixer?sku=634261

I don't know what Mackies are rack mountable. I have the Yamaha I use an Alesis Midiverb 4 for effects. The effects on the Yamama are very nice should you decide to get the version with effects. The Yamaha comes with rack rails and fits in a standard 12 space rack case.

I would buy one of these Pro Mixers and send back the Voco-pro one.

My Setup

Channels:

1 - DJ Mic
2 - Wirelless#1
3 - Wireless #2
4 - Wireless #3
5 - Wireless #4
6 - Reverb Level
7 - Empty
8 - Empty
9 / 10 - Sound Card #1
11 /12 - Sound Card #2
13 / 14 - iPod
15 / 16 - CD Player

I use 14 out of 16 channels when everything is hooked up.

Thanks Cam......I talked to Carolyn recently and this is what She was talking about also....I guess this stuff just goes over my head, and I just don't understand how things work together?

Like on channel #6 you have Reverb Level...So you have plugged in a reverb Processor on Channel #6? Is it set in you rack?

For your CD player you only show 1 Channel? How do you handle two trays, 1 for CD+G and one for CD's?

As for your wireless mic's do you have (4) box's (transmitters)? where are those installed in rack? Or do you have just (1) sending unit (Transmitters) and several mics all off the one unit?

I'm a real newbie when it comes to this Karaoke thing,...frankly I'm only doing it because @ our club the ladies like to Karaoke now and then, and my wife is on the ladies board.....so I'm stuck! This is a lot tougher gear wise then DJ'ing.
 
Jim,

You have 8 channels already in the MD unit, and there my friend is your mixer. Run the DJ mixer into the MD.

Tell me exactly what you have and what you want to achieve.

Ok I just reread your post sorry!

Set it up as I posted above Key changer for players will still be functioning on Vocopro plus mics into two channels on MD unit, you still have a dry mic or two or three on the MD plus you can record and/or playback at the same time.

And you still have a couple of available inputs as well.

I'm sorry Steve, this all goes way over my head....?? I'll try...

Let me see if I understand......I send the MD to Voco-Pro Mixer on one of the channels on the Mixer say channel #3....where on MD player do I connect RCA cables to? Monitor Out?

So if I send MD player into Mixer say on Channel #3 then I set Key changer/Delay/echo for channel #3 on mixer and all mics connected to MD player on its various channel inputs would be affected?

Do I need to do anything with the Channel controls on MD player for each of the channels with Mics hooked up to? Or just leave alone?

When I want to play the pre-recorded mini-disc I have on the MD Player, and at the same time I will have the mics hooked up as indicated above, will my Voco-Pro mixer affect the volume/equalization, etc of both mic, as well as volume/Equalization of track playing on MD Player? Do they both (Mics and Playback) leave the MD player from the one Output? Whatever one that is?

Or do I make my changes to the various devices (mic's, Player) on the MD Mixer, before it goes to Voco-Pro Mixer?

I know some of this stuff is probably real basic....but thats where I'm at, again if it wasn't for this feeling that I had to do this (Karaoke) for the ladies group @ the Country Club, I can assure you, I would not be involved!
 
OK take a deep breath Jim!
Let it out slowly!

Now we are going to totally screw your mind up LOL.

Your entire setup just the way it is .......... except...............

Vocopro mixer outs (left and right) that you normally run to your amps are now going to go directly to channels 7 & 8 on the MD8. So you have all inputs on the Vocopro available for microhones. If you need more mics you have channels 1 & 2 on the MD8 for dry (no effects) microphones. Plus you can run any other input devices into channels 3 & 4 and 5 & 6. So your outs from the MD8 now go to the AMPs.

With this setup and using the MD data disc you can playback two channels from the MD while you record on 6 others. or play through the unit without recording, simply using it as a mixer.

With this setup the only thing the Vocopro will affect are those that are connected directly to it. The MD8 will simply pass that signal unaffected right on through to the amp. What you play through the MD unit will go directly through to the amp and will not be affected by the Vocopro.
 
I'm sorry Steve, this all goes way over my head....?? I'll try...

Let me see if I understand......I send the MD to Voco-Pro Mixer on one of the channels on the Mixer say channel #3....where on MD player do I connect RCA cables to? Monitor Out?

So if I send MD player into Mixer say on Channel #3 then I set Key changer/Delay/echo for channel #3 on mixer and all mics connected to MD player on its various channel inputs would be affected?

Do I need to do anything with the Channel controls on MD player for each of the channels with Mics hooked up to? Or just leave alone?

When I want to play the pre-recorded mini-disc I have on the MD Player, and at the same time I will have the mics hooked up as indicated above, will my Voco-Pro mixer affect the volume/equalization, etc of both mic, as well as volume/Equalization of track playing on MD Player? Do they both (Mics and Playback) leave the MD player from the one Output? Whatever one that is?

Or do I make my changes to the various devices (mic's, Player) on the MD Mixer, before it goes to Voco-Pro Mixer?

I know some of this stuff is probably real basic....but thats where I'm at, again if it wasn't for this feeling that I had to do this (Karaoke) for the ladies group @ the Country Club, I can assure you, I would not be involved!


Thanks Steve................
 
Thanks Cam......I talked to Carolyn recently and this is what She was talking about also....I guess this stuff just goes over my head, and I just don't understand how things work together?

Like on channel #6 you have Reverb Level...So you have plugged in a reverb Processor on Channel #6? Is it set in you rack?

I use the aux 1 send to send singal to the effects unit and I return on a mixer channel.

For your CD player you only show 1 Channel? How do you handle two trays, 1 for CD+G and one for CD's?

I have a single CD Player that plays MP3. I use it only in case of emercency. I have not used int in 3 years I'm taking out of the rack.


As for your wireless mic's do you have (4) box's (transmitters)? where are those installed in rack? Or do you have just (1) sending unit (Transmitters) and several mics all off the one unit?

I have 4 transmitters.

I'm a real newbie when it comes to this Karaoke thing,...frankly I'm only doing it because @ our club the ladies like to Karaoke now and then, and my wife is on the ladies board.....so I'm stuck! This is a lot tougher gear wise then DJ'ing.

I use the same setup DJ or KJ if I'm Djing I only need 1 wireless microphone.

If you have any questions I'll be glad to help.