Trailer suggestions

To many ads? Support ODJT and see no ads!
I agree with the ramp door, wouldn't go without one. I outfitted my trailer with some wood rails covered with carpet and bolted to the steel support members inside. I then put some eye bolts in strategic places to allow me to strap my equipment in place. I also built some shelves with a tall lip at the front of the trailer for all my lighting and other lightweight stuff. I didn't have a wired light, and didn't want to hassle with one, so I bought a "AA" battery powered "stick on" light at Walmart and that's been doing the job. One other suggestion, is to get a drop axle on your trailer if you're planning on parking it in a garage, or going through parking garages. I got the drop axle when I bought mine...just because it was the only one they had. I'm sure glad I did. It's saved my bacon on gigs where there was low clearance.

_________________________________
Tunes 4 My Party - Houston DJ
 
Dave,

I rent trailers now. For me it is a better deal. I have owned them. Several actually. Ramp doors sound great. As long as it never rains where you live they are great. However they seal poorly after about 2 years.

Don't over buy. It's a lot harder to keep the load secured inside if there is too much open space.

Get internal lights, get an alarm system for it. Get it with tie down rails at 2' & 4' heights around the inside. Get a trailer with electric brakes. Not only will that help your vehicle brakes, but the alarm can be set to lock the wheel brakes which makes it exceedingly harder for someone to steal the trailer & everything in it.

Get armored locks & latches for the door. Make it harder to use bolt cutters or a portable saw to get in.

I place the most valuable difficult to easily replace stuff in first. way up front. Then I pack large, heavy items in front of them and the door. Basically to get to my console & music they have to move a lot of speakers & trussing.

Hope that helped.
 
not sure if it was mentioned but a friend of mine has an inner liner for his trailer and its a good thing cause someone used tin cutters to try and break in and ran into a second wall. I believe his is wood on the inside. The culprit gave up once he had a second thicker wall to deal with.
 
I dont have a trailer yet but I used to own a 12' box truck to haul all my gear in. On the inside I started off by Insulating all the side walls. then I took the thin 3/4" unistrut installed it vertical in all 4 corner sides and every 3 feet down each side. Took 1/2 plywood and glued some nice grey I/O Carpet. I made anchors out of threaded eyebolts with 3/8 strut nuts. you could lock down an anchor anywwhere along the strut to strap down anything with a ratchet strap. put a couple of 12v flourescent lights on each wall for light at night and it was good to go for about 10 years.
 
If this is for a one time thing, I think renting is your best option. If you're going to buy, don't buy for the present but for future expansion. I have a 6 X 12 and sometimes I wish I went bigger.

A ramp, inner light, and enough headroom is preferred.

Dual axles are the way to go if the towing vehicle can pull it, and most dual axle trailers come with assist brakes. They also hold more weight, and ride better.
 
I bought a 5x10 right out of high school. Didn't get a ramp bc at the time I was just an inpatient teenager.

Well now boy oh boy do I wish that I had gotten a ramp! Like someone else said don't plan for the present plan for the future.
 
I have a 5x10 with barn doors (useful when you don't have the space for the ramp) and a side access door. If I don't need the trailer (some halls / hotels simply have no room for a trailer) then I'll load up the truck.
 
I've got to get me a small system that I can actually get into a truck :yoDur:

My smallest system currently is a B52 Matrix 2000, and the sub is too heavy for me to lift up into a truck by myself. I'm seriously thinking about getting a QSC system using K8's and a KSUB for smaller gigs. A friend of mine used them at a wedding recently and I tagged along. They sounded great for their size.

Tunes 4 My Party
DJ in Houston
 
I've got to get me a small system that I can actually get into a truck :yoDur:

My smallest system currently is a B52 Matrix 2000, and the sub is too heavy for me to lift up into a truck by myself. I'm seriously thinking about getting a QSC system using K8's and a KSUB for smaller gigs. A friend of mine used them at a wedding recently and I tagged along. They sounded great for their size.

Tunes 4 My Party
DJ in Houston

Either that or it's time for a bigger truck.
 
I bought a 5x10 right out of high school. Didn't get a ramp bc at the time I was just an inpatient teenager.

Well now boy oh boy do I wish that I had gotten a ramp! Like someone else said don't plan for the present plan for the future.

I replaced the swing-out door on my trailer with a ramp. Wasn't hard at all. Just measure the door, go to Lowes and have them cut the same size out of the thickest plywood they have. A couple of heavy hinges should hold it in place nicely.
 
I replaced the swing-out door on my trailer with a ramp. Wasn't hard at all. Just measure the door, go to Lowes and have them cut the same size out of the thickest plywood they have. A couple of heavy hinges should hold it in place nicely.

+1 We also did that this year to our trailer. Ours had no back door, but had a concession window cutout. We love the added ramp, makes loading so easy. We put 8" pneumatic tires on all our carts and dj booth so everything rolls easily. We installed a marine battery and 12 volt lighting.
 
Or instead of doing all that work, you could buy one of these....:triwink:

It weighs only a bit over 20 pounds, it folds in half (long way) and we've had ours for several years now with no issues.
 

Attachments

  • load3.jpg
    load3.jpg
    16.3 KB · Views: 17
  • load2.jpg
    load2.jpg
    15.6 KB · Views: 17
  • load1.jpg
    load1.jpg
    19.2 KB · Views: 17