Let's Talk About OTS's Auto Beat Mixing

To many ads? Support ODJT and see no ads!

HiDefDJ

New DJ
Aug 13, 2006
2,150
0
47
It's been 3.5 months since OTS released it's highly anticipated, long awaited ABM feature. Not only did they release that, but they also released a slew of other surprise features such as karaoke & video support. Well done.

While the ABM feature isn't what most of us had in mind, people I have talked to have been thrilled with the release. I have not actually sat down myself to fully learn the technique but hope to do so soon.

So please come out OTS guys. If you have been tinkering with your songs to make them ABM compatible, let me hear your results. Are you happy with the results? Are you disappointed? How is the update overall?
 
I've set up about 1300 songs for ABM. I love it! I never thought that I would use it that much, but I'm becoming a beatmixing fool. Or maybe just a fool. About the only thing I don't like is that I can't ABM out of a song in the middle of it; the Intro and Outro Beatmix Match Points are the only places where Ots can automatically mix in or out. Of course, I can always do it manually. Another big plus in the 1.75 update is the support of ASIO drivers. And video and karaoke, although I don't do either of those.

Chris and Papa, you've heard these, but for others, I've recorded some mixes and put them on my website so that you can listen to them if you want.

A simple loop of Ace of Base's Cruel Summer to help someone figure out Match Points for a seamless mix.

A beat mix of Fergalicious into Walking on Sunshine for the same purpose.

An Alternative set.

A Funk-Dance set.

An Oldies set.

A Rap set.
 
I just listened to the oldies mix. Very nice!!!
 
It's all in the Match Points.

Take a look at http://otsdjsupport.com/showthread.php?t=8400

That's where I helped the guy in fixing his ABM train wreck.

Also check out http://otsdjsupport.com/showthread.php?p=78767

The Match Points are "pivot points" where the beats in both songs will match. They are also the points where OtsDJ transfers domination from outgoing song to incoming song. They anchor the "1" beat, and the Range Start Points just tell OtsDJ where to start counting. With a little deft slider work and music knowledge, you can pretty easily line up the beats to the ticker clock.
 
I too would have liked to have a method to automatically mix out of the center of a track, but It is possible manually. All in all, I love this! I spent last weekend setting of the 100 top 40 hits of 2006 according to MediaBase for beat mixing. I've got maybe 400 tracks configured currently.
 
Has anyone esle noticed a diference in the original OTS mix algorithm?

I notice that after installing the new version, the regular segues in OTS are no longer as tight as they once were. I used OTS at a corporate reception recently and nearly all of the mixes were dipping annoyingly close to dead air.

What's different in this version that would account for the new lag?
 
After listening to your files. That is is not beat mixing that is beat timed fading.

I'm going to record a few mixes over the next day or so of beat mixing.

Don't get me wrong it's very nice, but a DJ should be able to do this type of mixing effortlessly. This is how I mixed when I used cd's before I learned to loop, overlap, and mix. It appears this is going to make even more mobiles human jukeboxes.
 
Always a critic layin' 'round trying to cause trouble....

It's been 3.5 months since OTS released it's highly anticipated, long awaited ABM feature. Not only did they release that, but they also released a slew of other surprise features such as karaoke & video support. Well done.

While the ABM feature isn't what most of us had in mind, people I have talked to have been thrilled with the release. I have not actually sat down myself to fully learn the technique but hope to do so soon.

So please come out OTS guys. If you have been tinkering with your songs to make them ABM compatible, let me hear your results. Are you happy with the results? Are you disappointed? How is the update overall?

Cam, are you an Ots user? I suspect not, so I guess that disqualifies you from answering the question.

As the owner of Ots and VDJ, I am well aware of what Beat mixing is, what it should be, and what I like. Your Basic also owns both VDJ and Ots, and I'm pretty sure he knows what Beat mixing is as well. Your sharing of what you consider Beatmixing is rather worthless because of this IMO.

There isn't a software available that does everything for everyone, including whatever you use, so don't try to stir up trouble here with your insinuations that we don't know what were talking about or doing. The proper name of this feature in OtsDJ is Auto Beat Mixing. Call it beat timed fading if you must, but from what you've listened to, you really don't have a clue as to what settings were used to get the results you heard.

This feature is used by determining the beat of both the intro and outro of a track, aligning the beat at a specific point in which you want to switch tracks (mixpoint) for both intro and outro, and then telling what values you want to use for pre and post mixpoint non percussive intensities. The NPI is what determines how to mix busier tracks with tracks that provide a simple percussion intro or outro, so as not to clash.

Yes, it is automated, so what. We did the work to do the job once ourselves, and will never have to do it again. Many won't know how to do it properly, as many have requested that Ots should have simply turned the intros and outros on by default. This would have caused many a train wreck, but my point is until they get to know how it works, they're clueless and asking for trouble.

Get used to automation, because everything becomes so. You do have a playlist, right? tracks do feed automatically from this playlist to a deck in your software without manual interaction, right? Otherwise you best stick with your CDs. Oh! Wait! That's got a motor that automatically spins the disc for you.... perhaps a hand wound victrola is in order. Choose your tool... Hammer and nails, or Airgun... Now let's go roofing! Sorry, I got dibs on the airgun!
 
Has anyone esle noticed a diference in the original OTS mix algorithm?

I notice that after installing the new version, the regular segues in OTS are no longer as tight as they once were. I used OTS at a corporate reception recently and nearly all of the mixes were dipping annoyingly close to dead air.

What's different in this version that would account for the new lag?

No, I have not noticed this. To my knowlege, the mix algorithm wasn't touched for this release, but was for 1.15, as there were still problems when tracks in both decks were of the same length but less than 3 seconds long.

I could be wrong however. It still mixes on the reference point from both tracks if not using ABM, so unless you only notice this on new tracks you've created, your old tracks should mix just as tight as always.
 
Jeff,

Nothing has changed except the new version of OTS. I've played these tracks at other events and always appreciated the tight segues in OTS.

But this time the mixes were noticeably late. While it didn't matter much for this event, I switched back to CD a couple of times because it was just so annoying I had to give myself a break from cringes.

I have ABM turned off, but is there some other "switch" that might be causing OTS to use a differenet trigger? I couldn't find anything in the settings.

I'm thinking of going back to the older version and see if the problem is eliminated.
 
On another note:

Jeff, why so touchy? I just listened to the mixes and Cam is correct.

I can't tell if it's entirely the software, or partly Bryans cue points, but the fades are being timed in some fashion and there is no respect for the music measure. Particulary in the fade outs. The roll-off of the previous song seems to be a consistent problem. It needs to be exponential not linear.

Some of the mixes punch quite well, like when there's mostly rhythm breaks. But the others are not that good. (Great for software obviously, just not all around impressive.)
 
Sorry, I get touchy when beatmixers give us non beatmixers, or software jockeys attitude... Much like those that spin vinyl think that anything other than vinyl DJs aren't DJs at all (No offense to the likes of Vinyl Spinner ;) ). It's all ego, and "I'm better than you" hype, and I'm sick of it.

One thing I'd like to see these guys do is keep 2 tracks in sync manually, while changing tempo.
 
Jeff,

Nothing has changed except the new version of OTS. I've played these tracks at other events and always appreciated the tight segues in OTS.

But this time the mixes were noticeably late. While it didn't matter much for this event, I switched back to CD a couple of times because it was just so annoying I had to give myself a break from cringes.

I have ABM turned off, but is there some other "switch" that might be causing OTS to use a differenet trigger? I couldn't find anything in the settings.

I'm thinking of going back to the older version and see if the problem is eliminated.

To my knowlege, there is nothing that could be causing this. Sorry... Have you contacted Ots directly on this subject? I haven't noticed it myself.
 
I've noticed that the standard mixes are a lot looser than before, too.

But to Cam and Proformance, I hand-tweaked the ABM match points and Intro and Outro lengths. I'm not at my home computer right now so I may not remember correctly, but I'm pretty sure that except for the Oldies set, all songs are set for 16-count Intros and 16-count Outros. You can quibble about where I placed the match points, but I like where I have placed them in the tunes. I could just as easily had 20-count or 32-count or 64-count or n-count Intros or Outros, but I like 'em at 16 counts. So sue me!!

Now Cam, you can be as snooty as you like regarding REAL beat mixing, but the Ots ABM is far from your characterization "beat timed fading". But isn't that what beat mixing is all about?? I think I know where your problem with it originates: Ots's ABM doesn't let you float a snippet of a song over the one currently playing. Ooh. Got me. I guess I'm not a REAL beat mixer. I don't care what you want to call it, my clients and my dancers think it's pretty damned good.
 
Bryan, I think you missed the point of my post. I get along with everyone and I don't knock anyone for their methods.

I listened to your samples and added my take on the software. It does a very nice job. Many of us have different strong points in our own business. If you feel this has made you better at your job that is fantastic, I am happy there is something out there for you. Maybe you are always out in the crowd at a wedding, and this is just what you needed.

I'm sure computer automation will progress even further over the next many years. Ok, yes it's not beat mixing, but let me ask how many events do you do in a year where beat mixing would be a true asset?

My real comment is that it's called auto beat mixing, I feel the name is misleading. I try not to make any post meaningless, if my opinion is not realitive to the subject matter I will gladly keep it to myself.

I'm sorry, I'm passionate about mixing and remixing on the fly. It's the musician in me becoming a DJ. Many old school guys give it to me all the time because I use a computer to achive my results. I still count BPM even with a computer. I'd love to be able to help anyone that would like to be better at mixing. The way I see it we can always learn something new.
 
My appologies then Cameron! You have much less ego than I thought you had from your initial post. I shouldn't have snapped at you. Seems you understand my position with many of the vinyl mixers or turntablists.

I really do feel however that you should try the technology, before commenting on it... Get to know how it works, and understand it if you know what I mean....
 
I could just as easily had 20-count or 32-count or 64-count or n-count Intros or Outros, but I like 'em at 16 counts. So sue me!!

That's the point cam was trying to make. That the program is counting beats - a simple way of "timing" in and out of a mix.

As a "formula" that would not really be analogous to mixing crafts - it's more of a synchronous segue.

Don't let the criticism get under your skin.

Every DJ has their calling card. You have to understand Bryan, that there are some of us who get hired specifically because of the way we mix. So what a software can or can't do is of particular interest to us.

all songs are set for 16-count Intros and 16-count Outros.

I haven't looked into these features yet, so let me ask you: is that a global setting for the mix or can you set each individual song to have it's own unique intro/outro lengths? Can the intro and outro lengths be different within the same song?

To make better mixes there is a need to set unique intro/outro lengths with respect to every cue point in any given song. There also needs to be a way of selecting the amplitude curve. Fading in and out on a linear curve isn't goig to make a consistently good mix.

Thanks for letting me know I'm not the only one who's seen a change in the way the original auto-Dj mixer is performing.
 
To my knowlege, there is nothing that could be causing this. Sorry... Have you contacted Ots directly on this subject? I haven't noticed it myself.

I wanted to see if anyone else had experienced this same change before contacting OTS.

I'm sure most people are distracted with setting up all the new features - so if there is a change, it may be a while before users start to notice.
 
I haven't looked into these features yet, so let me ask you: is that a global setting for the mix or can you set each individual song to have it's own unique intro/outro lengths? Can the intro and outro lengths be different within the same song?

To make better mixes there is a need to set unique intro/outro lengths with respect to every cue point in any given song. There also needs to be a way of selecting the amplitude curve. Fading in and out on a linear curve isn't goig to make a consistently good mix.

Thanks for letting me know I'm not the only one who's seen a change in the way the original auto-Dj mixer is performing.

The best answers to your questions can be found here...
http://otsdj.com/doc/tut-abm/

Ots scans the track, and determines what it thinks to be the best mix (not always the case) most generally, this is 16 beats pre and post mixpoint for intro and outro, but you are not limited to this. Some tracks I've used 1 beat pre and post to create a remix of a particular track that sound more natural, but necessary to remove some content for a clients request.

You can mix intro end range points to outro mix start points within something like 6 beats of each other, so basically, you can mix all but the 6 beats of a track to another depending how that other track is set up. It takes 2 tracks to mix, everything revolves around the mixpoints of the 2 tracks, they start mixing on the shortest of the 2 start ranges, and end on the shorter of the 2 end ranges, and the actual fade is determined by the values of both tracks NPI values that are defaulted at 50.

Please do read the tutorial from the link above, as it is very helpful in understanding the ABM process.