Have you ever noticed...

To many ads? Support ODJT and see no ads!
G

Guest

Guest
...the new guy who comes in, and asks some question, gets an answer, then gos and does something totally different anyhow?

I get so "torqued" when I waist my time answering this way. There are all sorts of posts about "what equipment"..."how do I do this"... blaa blaaa blaaa.

This guy (over there) says he wants to get "good quality" lights for his new show. He says his budget is $500 and wants suggestions. Why did I waist my time researching the answer, telling him what I know, then he goes and buys some junk anyhow?

I was upset... I'm over it now.
 
Tyrone.
I know what you mean, I guess people always think they know more than one who has done this for a long time. It happened to me when a guy was building up his engine. I recommended a camshaft, intake manifold, carb, etc. considering the type of heads he had, transmission and rear end ratio. He thought he knew more and bought the biggest camshaft he could find. Well the cam was designed to run between 4500-7300 RPM. He barely had clearance at the pistons. The intake manifold was mismatched and the auto transmission had a small torque converted with a 2000 RPM stall speed with a rear end with 3.07:1 gears. There was no vacuum for his power brakes, not enough compression to put it mildly and the car threw so much unburned fuel through the exhaust pipes that it was a fire hazard. And it was a dog. He had to buy all the stuff again. If only he had listened. We know your the person to ask about lighting.
 
Tyrone,

Just tighten your belt around your waste and forget it! LOL

Sorry I couldn't help myself and I am one of the worst spellers around.
 
I myself came in here new and asked rather soon about new lights. I was thinking about adding the Oceana and a UV cannon-type light. I changed my mind and decided to go with a pair of Intimidator 2.0's. Couldn't be happier! Now I just want that second pair...

So we're not all like that...
 
OK, so I don't want to hijack this thread, but what would members recommend for a lighting system? I am starting from z-ro, personally (knowledge and equipment). I'd like something basic and simple for karaoke. I know I'd like a T-bar, 2-4 basic PAR cans (46 or 56 with gels?), maybe an effects light and a controller. I promise I won't ignore you and buy "junk" :sqerr:, I just want to build a system slowly and gradually. I trust a fellow Mine-snow-tan, Tyrone. Really. Especially from Resort country.
 
What's your budget Kayleigh?
 
...the new guy who comes in, and asks some question, gets an answer, then gos and does something totally different anyhow?

I get so "torqued" when I waist my time answering this way. There are all sorts of posts about "what equipment"..."how do I do this"... blaa blaaa blaaa.

This guy (over there) says he wants to get "good quality" lights for his new show. He says his budget is $500 and wants suggestions. Why did I waist my time researching the answer, telling him what I know, then he goes and buys some junk anyhow?

I was upset... I'm over it now.


We like to call that the "Anastasia Effect."
 
I think some people just need affirmation on the purchases they were considering to start with! (guilty):sqembarrassed:
 
i can't speak for everyone, but i know i have recieved some great info from people from this forum and others. I did take a lot of the advice and am glad i did.
However, i probably have not listened to everything piece of advice right away and went out and made mistakes and then remembered the advice i didn't take.
Tyrone, your advice was not wasted. The person will eventually realize their mistake and will be glad they don't make a second one.

Keep up the great work everyone!!!
 
If that one person doesn't take your advice, then there will be others that will read the threads and posts with your information and will gain from them.

It's possible that they might not have been ready to go to that next level and decided to go with something that they were more comfortable with? Maybe they were fishing for information for future use? Maybe they were just "full of it" and were wasting your time on purpose?

No matter what, you shared the information and someone will ultimately benefit from your advice.
 
Tyrone.
I know what you mean, I guess people always think they know more than one who has done this for a long time. It happened to me when a guy was building up his engine. I recommended a camshaft, intake manifold, carb, etc. considering the type of heads he had, transmission and rear end ratio. He thought he knew more and bought the biggest camshaft he could find. Well the cam was designed to run between 4500-7300 RPM. He barely had clearance at the pistons. The intake manifold was mismatched and the auto transmission had a small torque converted with a 2000 RPM stall speed with a rear end with 3.07:1 gears. There was no vacuum for his power brakes, not enough compression to put it mildly and the car threw so much unburned fuel through the exhaust pipes that it was a fire hazard. And it was a dog. He had to buy all the stuff again. If only he had listened. We know your the person to ask about lighting.

Boy that brings back memories of my younger days.....before entering college I was a mechanic/machist
The thing I've learned through life is ..."Don't ask the question if you don't want the answer:....
 
I wasn't trying to sound like a jerk...

...and I know there are a LOT more qualified people on all the boards, but I spend some time looking into gear that this guy could get, that fit his posted requirement, ie: "I don't want to buy entry level components I want to buy high quality components". He had a budget of $500.

He then got the "quick scan system". I just shook my head.

OK, it probably sounds like I'm still not over it... but that was just one of two posts with the same situation over there... the second one had to do with swapping a power pack with a co-pilot wireless, which can't be done and the guy was auguring with me.

I just needed to vent... thanks everyone for allowing me to do that. :sqwink:
 
Well, if his budget truly was $500, the quickscan probably wasn't the worst way to go. I've never seen it in person but from what I've seen I would think a set of those (4 I think?) run like $300ish, something around there anyway, and would be better than a lot of spin-n-pukes I've seen used (it can be pretty bad!)

The quickscan's aren't really upgradeable in the future though, which is why I settled with two 2.0 fixtures as my budget was around $500 too. I had not considered the quickscans, by the way, because of future-expansion.
 
You are correct sir...

I was only working with his quote to acquire high quality gear. While the "Quick Scan" might be OK gear (sorry I said it was junk) it is VERY entry level stuff.
 
While the "Quick Scan" might be OK gear (sorry I said it was junk) it is VERY entry level stuff.

I agree completely (where's that button, anyway? ;)) I was just saying that it's probably better than a lot of other entry level gear that I've seen around here passed off as "high-tech professional lighting." :sqmad:
 
Greets, Tyrone.

If it's any help, I have shared your fustration at times. Members ask for advice then disregard it. Especially discouraging is a response from the author who finally discloses the fact that he cannot afford professional business equipment. :(

I cannot count the number of times Steve Miller and others have taken the time to post well thought and informative suggestions over the years only to see their recommendations dismissed. It can be discouraging to say the least.

I agree with Scott, Kirby, Brother Gray and the rest. Your assistance was not wasted, my friend.

Many members browse these forums without posting. Your professional advice, experience and recommendations are there for all to see. Folks may not think to thank you for it... but they have been helped just the same.

In my case, I have heard from members at the Carvin bbs who contacted me privately for DJ biz info. Soundmen and musicians are taking up the DJ biz in addition to their regular engagements. In a musician's forum, DJ companies aren't always welcomed with open arms, LOL. But I've been there for several years and they know me. We all post our experiences for good or for bad.

Dealing with musicians and soundmen is easier than dealing with wannabe DJs. Musicians and soundmen don't have to be steered away from ipods and RS stuff. :D

I have emailed .doc files of our service agreement and wedding planner. I have provided links to the promotional music suppliers. I have addressed questions and issues when asked. It's my hope that these folks will not make the same missteps I did in the early days.

Sometimes they respond with a thanks. Other times they don't. All we can do is hope that we have helped in a meaningful way. :)
 
Thanks Fred...

That helps. And, Kayleigh... I sent you a PM. Let me know how I can help.
 
Tyrone, he probably had his mind made up before he even asked the question. Just wanted to see if anyone would agree with his plans. As was mentioned previous, others will gain from reading your recommendations.