Post Pictures of Your Teen Set-Ups!

To many ads? Support ODJT and see no ads!
barry stamper said:
Very nice set up! good article in djtimes by the way
Click to expand...

Thanks very much Berry.. The DJ times article is about 60% correct.. as you may know there is no Billings, South Dakota.. Billings is in Montana. The headline also disappointed me but overall its still neat to be featured in the magazine.

As for setup.. I am currently in the process of replacing the 4 strobe lights with two 800W DMX strobes from American DJ.. and adding two Elation UV Wash lights where the other two strobes went.. Ill snap a quick pic when its all done..
 
New Rack Pix

Hey guys just added some new gear to my rack, primarily a BEA-utiful AA DCD PRO1000!! Here are some pix! I'll post a new main setup next big gig!
 

Attachments

  • DSCN1028.jpg
    DSCN1028.jpg
    118.6 KB · Views: 6
  • DSCN1030.jpg
    DSCN1030.jpg
    118.2 KB · Views: 5
I did a little upgrading too since the last post of setup pictures. Added a whole new JBL MRX Rig.. Two dual 18's and two dual 15's powered by two QSC PLX 2502 amps and one QSC RMX4050HD.. Also added two Martin T-Rex fixtures and a Red/Green 120MW Laser..

Here are some pics from a fundraiser we did this last Sunday.. 800+ high school kids in attendance.. made for an excellent evening..

The Video Screen is not pictured..

Jan14_Setup1.jpg


Jan14_Setup2.jpg


Jan14_Setup3.jpg


Jan14_Setup4.jpg


Jan14_Setup5.jpg
 
Sweet! :thumbsup: :thumbsup:

I'll bet it's a lot of fun lifting those cabinets on top of the others.

Very nice. :sqcool:
 
Thanks for the comments guys..

Kriby.. the tops are only about 90lbs so they are not too bad compared to the subs which are about 170Lbs.. but yeah it sucks hauling them around!

Chuck... I originally purchased the Chauvet Scorption at the Northern DJ Convention in October for about $360.00. Its a 10mw with fatbeam technology. About the middle of December i found a Green and Red one on eBay for about $200.00.. rated at 120mw.. I made the purchase in hopes to get it by New Years but didn't receive it until about a week ago..

Long story short.. it puts the Scorpion to shame in brightness.. The downside that it is not programable (where the Scorpion comes with a remote).. just runs to the music but there are a ton of patters/programs so it still looks great..

Here are some more pics of the laser..

laser1.jpg


laser2.jpg


laser3.jpg


laser4.jpg
 
DJ_Marek said:
Chuck... I originally purchased the Chauvet Scorption at the Northern DJ Convention in October for about $360.00. Its a 10mw with fatbeam technology. About the middle of December i found a Green and Red one on eBay for about $200.00.. rated at 120mw.. I made the purchase in hopes to get it by New Years but didn't receive it until about a week ago..

Long story short.. it puts the Scorpion to shame in brightness.. The downside that it is not programable (where the Scorpion comes with a remote).. just runs to the music but there are a ton of patters/programs so it still looks great..
Click to expand...

Doesn't any laser over 4.95mw need a permit unless it's putting out a fat/wide beam?
 
DJ Marek,
Nice Set-up!, Those lasers look awsome!

Carolina,
Loving the new American Audio DCD1000!
 
DJ SVO - Thanks for posting those links. There was some very interesting and valuable information posted there.

:thumbsup:

Kirby
 
Marek, sorry about bringing some gloomy clouds to your horizon but I think being safe is the most important thing both to you and your clients. You have a terrific setup and I would personally feel bad if something happened to you due to an accident which will have consequences that may last a very long time. You are young and have worked hard to have your system so you should be very proud of what you have.
Kirby,
Glad to help
Jacob
 
Jacob.

I really apprachate the info you provided.. honestly i had no knowladge that you needed any type of permit to run the laser. Luckily the company I purchased this from offers a 30 day money back guarantee and i plan to get ahold of them tomorrow to see what we can do.. No worries about gloomy clouds.. I am actually very glad you took the time to post the links and provide the info you did.. as for me.. Im going back to the Scorpion.. It ain't 120mW but its still worth running.

Once more Jacob.. thanks very much for the useful post.. very appreciated!
 
Here's one that does not require a Variance/Permit. It's more expensive but with your setup it's well worth the extra $$$$.
http://entsyscorp.stores.yahoo.net/scsc55dmxlac.html
Give Bill a call at ESC, the phones are listed in the contact section of the page the link above opens. The best price is better than what is advertised and Bill knows his stugg. The laser is also DMX so you could take advantage of more features.
 
Thanks Jacob.. I looked at that one when i purchased the Scorpion.. I might just replace the laser all together with another effect.. not sure yet with what.. i know it wont be a laser that requires a variance.. thanks again for the info!
 
Everything (except the two racks of par lights) is ran by Chauvet Show X-press software.. ill upload a few screen shots when i get a chance.. took a lot of time to program everything in (as we have over 70 different shows) but it does look great.. maybe i can find a video too..

Thanks for the positive comments!
 
Marek: why not look at getting a couple of scanners with a laser feature, true it wont be as versatile and wont provide the same effect as a solo laser, but it gives u an option besides replacing the laser and having none altogether. And even if u just used the scanners for the laser effect, you'd still have a good effect and a pair (or more) of backup scanners!
 
You must log in or register to reply here.
Top Bottom
Back