Intimidator 2.0 (was "Oceana w/out DMX")

To many ads? Support ODJT and see no ads!

awdj

Mac Daddy DJ
Jan 4, 2007
675
229
Well I decided to scrap the Oceana and some other lights from my order (for now anyway) and got a pair (just a pair for the time being) of Chauvet Intimidator 2.0's to push me into the world of DMX.

Now... I need a controller. I know there's been a lot of talk on the board lately regarding DMX controllers, but I've got to add one more thread.

I'm trying to decide if I want to go the laptop/freestyler route, or hardware. Any thoughts, future expansion points, etc would be greatly appreciated. I've even considered the CH-9 (or something like that, can't recall of the top of my head) just to get control between slow and fast songs, although I think that just limits me more than anything in the future.

If/when I add more lights it will be more scanners (probably another pair of intimidators) and either a powerpack for my regular pars or I might splurge again and get a few LED pars. Either way, that's the extent (for now) that I can foresee, and would love a recommendation of more than just a link. :) Please list strengths/weaknesses of any suggestions!

Thanks!!
:sqconfused: :sqbiggrin: :sqrolleyes:
 
.

Now... I need a controller. I know there's been a lot of talk on the board lately regarding DMX controllers, but I've got to add one more thread.

:

If you're like me, and just wanna Plug N' Play.....the Chauvet CA-8 EZ controller might be the answer. It sorta looks like one of those fog machine controllers, except with more buttons and 2 LEDs.

Only $36 (with shipping) from Effectlighting.com in Tampa, FL

I have only used the "blackout" function so far......that is because the built-in programming is so wonderful already.
 
Yeah the blackout part is one issue I've seen. You can't just cut the power from these lights (and I know that's not good for the bulb anyway) because when you plug them back in they have to re-initialize for a few seconds before actually turning on.

I'll have to look at the difference between the CA-8 and CA-9. I haven't ruled them out. I believe (at least one of) these can also set the style, such as "fast" and "slow"?

I still might do something with freestyler/usb adapter. Not sure yet. I agree with someone else in the other thread about the mouse being clumsier to deal with when you need a quick change in lighting.

I know there area also a ton of small hardware controllers out there in the $100-200 range, but just don't know enough about those to make a decision.
 
Thats good one more Dj to leave the world of spin and pukes soon I will own all the spin and puke market yes my plan is comming together perfectly (evil laugh)
 
Lighting Help... soon

This kind of just got pushed into high-gear. Can anyone tell me more about the CA-8 or CA-9 controllers? There are small pics of them on the net but can't really tell what you can control. I don't care WHAT gobos or colors are used as much as the style; slow vs. fast, etc.

Also, I'm thinking I would probably be better getting a regular dmx controller to also better control my PARs (powerpack, eventually. T16F for now).

Looking to spend 120 or less on the controller. Not sure how the faders work or how to program everything at this point. I work with electronics daily and am a certified electronics technician so once I get my hands on one it shouldn't take long to get it down. Just don't know where to start.

ALL RECOMMENDATIONS APPRECIATED!!!!!!!!!!!!

I still haven't ruled out usb/laptop either.... please advise!


:sqerr: :sqerr: :sqerr: :sqerr: :sqerr: :sqerr: :sqerr: :sqerr: :sqerr: :sqerr::sqerr: :sqerr: :sqerr:
 
Do a search on "DMX" and read every thread...

You can buy the controller, but if you don't know how to program it... you'll be LOST. Read everything you can find on these boards about it... that will point you in the right direction.

Don't put the cart before the horse with software. Learn DMX before you buy a software controller. Others here, who know how to program, will most likely attest to this.
 
Does anyone have any comments about this unit? I don't want to shoot myself in the foot later on with future expansion...

Wiedamark offers an Elation controller on their site...Looks full featured...$109.00

Basically need a controller for 4 (currently 2) Intimidator 2.0's and probably 8-16 ch. of old-school pars.... or some LED pars.... although I like the look of a bunch of them all lined up and that's prb not going to happen with the LEDs.

I surprisingly haven't heard much hardware vs. software controversy. What do you people think?! :)
 
This kind of just got pushed into high-gear. Can anyone tell me more about the CA-8 or CA-9 controllers? There are small pics of them on the net but can't really tell what you can control. I don't care WHAT gobos or colors are used as much as the style; slow vs. fast, etc.

The CA-8 is the model I own....in order for this unit to work, it must be specifically mentioned in the instruction manual for your Chauvet DMX fixtures.

Mine controls quite a few functions, but I'm only proficient with 2 buttons (so far):

Top button is the "blackout" or "standby" mode. This keeps the lites on standby w/o turning them off, fans still running (Igor sez: "Fan good").

The "MODE" button has 4 settings:

1) (LED off) is Sound 1
2) (LED blinks) normal is Sound 2
3) (LED full on) is Slow Sound 3
4) (LED blinks fast) is the Position/Latch setting [haven't used....yet]

The "FUNCTION" button produces different variations within each mode setting. For example, pushing the button in #4 will operate (1) PAN, (2) TILT, & (3) Dimmer (425MW Wash unit only).

In the Slow Sound setting, tapping the "FUNCTION" button changes the gobo, but if you hold down the same button, you change colors instead.

I've only explored the tip of the iceberg with this unit, but because the Mini Legends are such Plug n/ Play w/o need for changes or tweeking of any kind, one could get by just using "Standby" button & never miss the other functions.

OTOH, having a full-featured DMX controller gives you dimming capabilities on your LED par cans, and ability to run multiple branded fixtures.

Since I rarely use Par Cans, my need to use a controller is limited.....
 
I made the comment about the mouse maybe being clumsy if you are wanting to do blackout then fullon the blackout etc. I say that out of ignorance because I've never messed with freestyler or any others for that matter. If there is an easy hotkey or surface control to allow quick changeups then even I will get interested.

Again, I love LSC DMX Operator pro. but thats a pretty extensive board for what you have now, but it sure does allow plenty of headroom to grow. Itdoes not work with a computer. There are plenty of boards that are coming out that do and THAT is the solution for you!

thanks,
 
The "MODE" button has 4 settings:

1) (LED off) is Sound 1
2) (LED blinks) normal is Sound 2
3) (LED full on) is Slow Sound 3
4) (LED blinks fast) is the Position/Latch setting [haven't used....yet]

The "FUNCTION" button produces different variations within each mode setting. For example, pushing the button in #4 will operate (1) PAN, (2) TILT, & (3) Dimmer (425MW Wash unit only).

In the Slow Sound setting, tapping the "FUNCTION" button changes the gobo, but if you hold down the same button, you change colors instead.

What is the difference between 1 and 2?

Is 3 a mode that would work well with slow songs, or what is the slow referring to?

I'm guessing mode 4 wouldn't apply to the Intimidator 2.0?

When you are talking about the "slow" mode, tapping function changes the gobo -- what about the movement? Would that still be sound activated? If you don't press (or hold) function, will the gobo or color ever change? In other words, will it play unattended in slow mode, and function acts as a "next" button? Please explain...
 
Again, I love LSC DMX Operator pro. but thats a pretty extensive board for what you have now, but it sure does allow plenty of headroom to grow. Itdoes not work with a computer. There are plenty of boards that are coming out that do and THAT is the solution for you!

So a hardware board would interface with software? Via something like USB I'm assuming? Do you have any model's handy or a price range? I would guess these are going to be out of the current budget, but definitely want more info.
 
So a hardware board would interface with software? Via something like USB I'm assuming? Do you have any model's handy or a price range? I would guess these are going to be out of the current budget, but definitely want more info.

you know I say that, and now I can't find any. there is a usb chauvet tiger that has the ability to upload fixture libraries via USB. Doesn't say anything about control.

i know the martin lightjockey can be use with (I think) the Freekie console. Out of your price range....
let me keep looking.

I'm gonna check elationlighting.com....
 
I guess one question I've been having is, if controlled completely by dmx, how does it become sound-active? The controller has a line-in or mic?

I'm also still having trouble picturing this all working for a mobile dj. I COMPLETELY understand how a theater would use dmx with dimmer packs for a play, for instance, with different scenes and all, but for some reason just can't picture that working well (although I obviously know that it DOES) in a mobile dj environment with many movements and colors, and then throw the music beat in there also.

We need a dmx primer video!



Edited to add more:

I was at an NHL game last night and the arena has 8 scanners and 4 moving heads that are obviously using dmx as they are linked to sync. When the heads are moving randomly all over the arena, that can't all be pre-programmed movements, right? So is there a random mode with movement and/or color?

And then someone had mentioned in a post a few weeks ago that with scanners (or maybe it was moving heads) you could use them as a spotlight, for instance at a wedding to show a person speaking or the garter, etc. How is the location of the lights first of all determined and then saved?

I know, newb questions. I apologize. Once I get the jist of it in my head I think I'll be okay... :sign4:
 
I guess one question I've been having is, if controlled completely by dmx, how does it become sound-active? The controller has a line-in or mic?

Exactly

[/QUOTE]
I'm also still having trouble picturing this all working for a mobile dj. I COMPLETELY understand how a theater would use dmx with dimmer packs for a play, for instance, with different scenes and all, but for some reason just can't picture that working well (although I obviously know that it DOES) in a mobile dj environment with many movements and colors, and then throw the music beat in there also.

We need a dmx primer video![/QUOTE]

The key is when you are programming chases with DMX fixtures to make your chase movements from one beat to the next to do so subtly. If you have a sweet gobo and color hitting the wall, the next move could just be mirror movement if you want it to line up with the music well. Then the next beat could shift to the next color, not all the way around the color wheel, just the next color. Then the next beat could move the mirror again,

Then gobo design
then mirror
then color
then color and gobo
then mirror
then mirror again

Remember, not huge shifts, just little ones.

Whenever you go to a Pro concert, you don't see the moving heads goin crazy right....same thing for the dj.

DMX gives YOU total control.
Pan
Tilt
Gobo
Golor
Shutter
Strobe
Shake
Prismatic effect
Iris
just to name a few.

Each channel on the board lets you adjust the parameter of each effect.

On the other hand, if you don't do it subtly and you make something different on every beat, then Cool! iTs CrAzy!

Here's a couple vids from my site. These are not my newest lights by the way.

http://www.jfproductions.biz/main/media_play.php?video=humprom06

http://www.jfproductions.biz/main/media_play.php?video=lightingdemo2

http://www.jfproductions.biz/main/media_play.php?video=lightingdemo
 
awdj - sound active can occur in ywo ways.....With the Oceana/Kinta....If you program both channels at standalone (255), the light behaves as if it was in standalone and would rely on the built in mic....

If you are programing certain movements in DMX (say just sweeping) you controller would have an audio in..

I looked at the manual for the Intimidator....There does not appear to be a "standalone" availablity.

You will have to program all of your various scenes manually...

The other options; run them in stand alone - audio, or purchase the CA-9 EZ controller....
 
Eventually I will definitely be using them completely dmx and I can't wait, but I've only got two of them and I feel that if I jump into controllers and stuff now, that since the budget at the moment is rather small, I would be kicking myself later for not getting a better one so I think I'll deal, for a short while anyway.

This might sound a bit dumb, but as far as sound-activated mode, for now anyway, I don't mind it with the intimidators. They do a pretty good job. The only thing is I think they would also do a great job moving slowly for some slow songs, but if there is any beat to the slow song at all they'll go crazy once in a while which doesn't fit the mood.

I wish there was a way to just run them in standalone for most songs, but have a slow-override where they don't jump; just slowly scan around, for slow songs.

Any ideas here? Clear as mud? :rofl:
 
The CA 9 is like $40.00 and will give you limited contrl....
You'll find though that a lot are running their scanners in stand alone......

"I wish there was a way to just run them in standalone for most songs, but have a slow-override where they don't jump; just slowly scan around, for slow songs."

The CA 9......