My gear was sabotaged...

To many ads? Support ODJT and see no ads!
G

Guest

Guest
Tonight, I arrived at the gig and turned on my gear. I fired up the music and noticed that I had no bass coming from my left channel. I bi-amp, so I have one amp for my tops and one for my subs.

I thought I'd swap cords and check my levels, BUT, discovered that someone had plugged my top cables into the left sub (which already had it's own cable). So, now I had my lower amp and upper amp feeding into one speaker. It had blown my left channel on my lower amp. The right channel still worked.

I finished the show with three speakers and pulled it off, but I want to ring someone's neck.

I got to run out tomorrow and get a new amp... Does anyone know how long the warranty is on Behringer EP 2500's? Then I'm making covers for the speaker plugs so that you can't plug in two inputs.
 
Youch! Man, that bites. :(

I am wondering... who could have done such a thing and why?
 
Tyrone,

You were using Crown K2 Amps, right?

The protection circuits in those amps are extensive, allow the amp time to sit and I think you will find it will still work. If it doesn't the fix is not going to be all that bad at the most a thermal breaker is going to be wasted.

You should still go ahead and get another amp perhaps two because you need them with your system.

I thought the JBLs used speakon connectors, they can't be "tripped out".
 
guns.gif
Some people just can't respect other peoples' property. I hope you fiend the idiot (To put it mildly) that did it.
 
hey ish happens a gal pushing a cart of Ice water pitchers tipped it right into my Mackie which due to limited space was on the floor near a pedestal protecting it from other stuff but not a ice water shower. This was an accident much like a wire that might have been tripped on by a worker or guest who thought no one will know if I just plug it in.............Right here yeah thats where it must have been connected.

MACKIE LOST ITS PRE AMP AND HAD TO BE REPLACED!
I hope Steve was correct and your fix will be minimal Larry. Sorry to hear of the situation. This is the other side of the coin when choosing to leave gear outside your own storage location it isnt in your watchful care.
 
I just bought a new amp...

I ran into town today to get a new amp... same price as when I bought it new two years ago... $379.

This was a Behringer EP 2500. This is my club gig, and my gear sits up on stage for several months at a time. No one should be up on stage, but I recall the wires on the floor were askew (I didn't think about it at the time).

I will be installing the new amp tonight, and bringing the damaged one in for repair on Monday. Guess I'll have a spare, and I'm working for free this weekend.
 
That really stinks man. Very sorry to hear it.

A thought for others on the board... QSC amps have a 6 year warranty, don't cost much more than a Behringer, sound better... and best of all most likely wouldn't have blown under that circumstance to begin with.

I've seen even the RMX series amps connected to a dead short at full throttle and the protection circuitry worked like a dream.

Ben
 
Thanks, Tyrone. I was wondering what the heck had happened. Seems as though someone was tampering with the system. :(

Since this is your business equipment, you may wish to look at ways to safeguard it from tampering. Perhaps lock it away or place it in rack cases that may be locked. You can't be replacing amps every time some knucklehead monkeys with your system.
 
The pricing on that line of amps has been strange. I've got an EP-2500 (not the 1500) in my rack and got it new for 289.99 on 9/7/05 with free shipping, and now everyone's prices went up. I added the service plan for an additional 25 or whatever because it covers liquid damage (including condensation) and includes shipping both ways in the event it needs to be used. Normally I'm not the type to buy the service plans but in this case I think it was worth it.

That order was from Musicians Friend and I might have had them match a price from somewhere else, not sure on that though.

Either way I know that line has gone up quite a bit since then.
 
Maybe removing the speaker cables?
 
That sucks when some self proclaimed sound engineer messes with the gear

Im in the habit when playing locally of setting up in the afternoon for a 9Pm performance and leaving it behind. There has been many different times that I have came back to find Mixer Pots up to 10,wires changed around Etc. One night I showed up and they had the music blasting and the EQ to +12 Db straight across. Ask if I was happy about that one.

Ive been lucky Ive never had damages but I am also in the habit now of checking everything before I power up
 
All is well...

I got the new amp installed in my rack (Richie helped... damn, he's good) and rocked the house tonight. Old one will get fixed and put in the spare space in my rack as a back up...

Ben, I was going to get one from you, but I had to have it running tonight, and just made it the way it is. Next time buddy!
 
Tyrone,

You were using Crown K2 Amps, right?

The protection circuits in those amps are extensive, allow the amp time to sit and I think you will find it will still work. If it doesn't the fix is not going to be all that bad at the most a thermal breaker is going to be wasted.

You should still go ahead and get another amp perhaps two because you need them with your system.

I thought the JBLs used speakon connectors, they can't be "tripped out".

Steve's right.. and I believe that if it is blown, they are easily replaceable... but I might be wrong...
 
No worries Tyrone. It's a couple hour drive each way, and I know what being under the gun is. I'm just glad it worked out for you. Our #1 concern is what's best for our friends.

Ben

Ben, I was going to get one from you, but I had to have it running tonight, and just made it the way it is. Next time buddy!
 
One time, when I was doing a two night stint in the same bar, I left my system set up on stage over night!

I arrive the second night to find my entire system (still on the table) moved off of the stage!

The Bronco's had a playoff game that afternoon, and a couple of patrons wanted to use the big screen TV that was behind my setup to watch the game, even though the bar manager told me the night before that they would not be using that TV during the game as that room would be closed.

Needless to say, I was pi$$ed off (to put it mildly) . . .

So, I get the manager to help me move my stuff back up on stage (the six foot table with my gear on it), then when I go to put the amp back in place I noticed something about it!

Not only is the amp case all bent up and twisted . . . but the plugs from the RCA cables from the mixer are still in the inputs on the amp!

Basically, when they picked up my table to move it, they didn't bother to look under the table to see the amp under there with wires running through holes in the table to the amp.

The amp then fell about four feet off of the stage and hit the dance floor, which was that woodgrain looking formica stuff over cement!

For whatever reason, I didn't happen to have my backup amp with me that night, not to mention that I was too pi$$ed off to gig that night, anyway!

There was a snow storm going on outside that night and they just cancelled the gig and closed early!

But they did pay me as though I did the gig, plus gave me an extra $250 toward repair for the amp!

I never did get it fixed (was basically beyond repair anyway), so used the money to buy my present Peavey 1200 amp!