Good News, Speaker Problems!

To many ads? Support ODJT and see no ads!
Aug 9, 2006
2,367
8
51
Phoenix, AZ
So I have a Rattle in my speaker? What is it? What can I do?

Speakers are Wharfedale LA15P (Active), had them for over 4 years now
(Paid 699 ea, back in the day), Lo & behold they have warranty for 5Years, Woo Hoo!!!! :sqbiggrin:

So took them to the Local 'PA Shop' (Actual Name), bought them from another guy in town (Music Express - Will never shop here again) & they are going to take care of everything for me!

Thank the Lord it's slow time!
 
I had a rattle in one of my EVs a while ago. Turns out the transducer for the high freqency driver had come loose. They're threaded so I just tightened it back up. :)
 
I have a pair of old dual 12" EV's (from the 1960's) that still rock . . .

But the big heavy driver (magnet?) on the horns does come loose . . . and I have to open them up and tighten them every once in awhile.

Haven't used these speakers in two or three years, though . . .

They are big and bulky, so don't haul them around anymore!

Sometimes other things come loose inside speaker cabinets and all it takes is five minutes with a screwdriver to fix them!
 
Teflon plumbing tape wrapped around the threads of the HF driver then screw it into the horn. Will not rattle or come loose again, yet remains easy to remove any time you need to.

Loctite on any screws that come loose.

Hot glue any excess wire to the back of the cabinet to keep that from flopping around.

Also from time to time void free plywood will have a void in it that can cause a buzzing in a cabinet. Find the location by tapping, then drill a small holes into that area and inject epoxy into the holes with a syringe, the buzz will be gone.
 
While setting up this Saturday I noticed that one of the screws on the back of my EON was about 3/4" unscrewed. I screwed it back in by hand and made sure all of the screws were in tight. They all needed a little tightening.

I wonder how long that screw has been out though. I few more twists and it would have fallen out.
 
I had a rattle in one of my EVs a while ago. Turns out the transducer for the high freqency driver had come loose. They're threaded so I just tightened it back up. :)

Same thing happened to my JRXs New Years Eve. You couldnt hear it when playing but you could hear it when moving it. Just tightened it up and away we went