Personal Review of the Bose System

To many ads? Support ODJT and see no ads!
I'll ask the question......

QUOTE - "you certainly don't want to use it on a system with a limited frequency response curve"

How, if specs aren't available, How do you know?..or perhaps you don't mean the L1...but then again this is an L1 thread.

With all due respect, this is the type of "back-handed dig" that just gets my goat....someone's just gotta get one in.

I feel your pain Chuck.....
 
Mahalo this Steve not the other Steve... :) Not a dig at Steve just wanna keep my Steve's straight!

I was gonna let it go, but before my stats change here... I don't give a crap about specs... I don't know nothing about them and in my 21 years have NEVER bought ANY piece of gear because of specs,,,

All I care about is how it works on the job. If I buy something and it doesn't git er done,,, it goes back.

Do my BOSE git er done? For me at 90% of my gigs yeah!!

My gig at the Hrad Rock Cafe' last night proves it. I was nervouse about taking that system in there and as I was unloading my van almost took in my other set up.... but I said no, I'll never know if I don't push it and you know what? I frikkin rocked and the system rocked even harder..

Do I care about frikin specs, no. It got the job done in a way that please me more than I could have thought!

Do I care that some take shots at this system... yes.... and I'm real close to going off on some people but I'll be good.

For as much as some people like nothing better than to take a shot at anything BOSE I can be there to take a shot (edit) their system.

I'm sure that I can find something wrong with ANY piece of gear that someone posts, nothing is a perfect piece of gear, not even da BOSE...

So let it go... I'm all for fixing the site here so that anytime the words BOSE, L1, B1, Power Stand, Towers come up, it automatically gets edited...

In fact, just to be fair, I think that we should set it up so ANY name of gear automatically gets edited... yes, that's the ticket!! Let's do that!

Fred, are you reading this,,,, makes ya think doesn't it? LOL (that's an inside note between me and Fred) :)

Now sit back, grab your fave drink and chill out,,,, it's what I'm gonna do for the next few hours before I head off to my next gig where I won't be using my EDIT system I'll be using my other EDIT system that I use for my teen events....
 
...Since most D.J.s these days are working from MP-3 files...


I think that this is not a true fact.

In the real world of all DJ's combined I think you'll find that the majority are still using CD's . . . not PC's!

Will that change?

In the future . . . yes!

But today . . . the CD is still what most of us are using . . .
 
I think that this is not a true fact.

In the real world of all DJ's combined I think you'll find that the majority are still using CD's . . . not PC's!

Will that change?

In the future . . . yes!

But today . . . the CD is still what most of us are using . . .

I agree... and I use both.
 
Thanks, Chuck.

Yup... I been readin'. I don't know much about the L1 so I can't comment on it either way. :D

Anyhoo, welcome to the asylum.
 
I would be very interested in trying the L1 tops with my 18" RCF sub.
 
Chuck,

I have only purchased one system that I was unable to see the specs on.

I do most of my shopping based on specs. The specifications of a particular piece of gear tell you what it is capable of producing, how it will react in a given situation and what you can expect of it. For anyone in sound reproduction for a living the specs on a piece of gear is of the utmost importance.

The one and only time I bought a piece of gear that I had not studied the specs on I found a huge disappointment.

With the proper equipment a general frequency response can be attained for any speaker, I know that a simple shop setup won't be 100% accurate but it will at least put you in the ballpark. Until chamber tested response curves are published it will have to do.

Frankly I can tell the difference between songs ripped at 128 and those ripped at higher bit rates, my personal choice is a compromise between good sound and file size and I decided to use 256. Listen to a song ripped at 128 on your computer speakers and then on a full blown sound system with subs and tell me you can't tell the difference, then pop in a CD of the same song and again tell me you can't hear the difference! It is obvious. If you have a system unable to produce a given frequency range at the top and the bottom and then play a song which has already been chopped through and through you are going to again reduce even more of the material.

It's just logic!
 
I would be very interested in trying the L1 tops with my 18" RCF sub.

Bose and its reps do not recommend mixing their components with other manufacturers as the Bose components are matched to each other to work with their processors and amps, etc... Not to say mixing COULDNT accidentally produce a good result, but they dont recommend it.
 
I think that this is not a true fact.

In the real world of all DJ's combined I think you'll find that the majority are still using CD's . . . not PC's!

Will that change?

In the future . . . yes!

But today . . . the CD is still what most of us are using . . .

That was actually an observation from my brother, who is not in the biz, BUT in retrospect, I am seeing most of my brethren in this area going digital in some fashion. Personally, I bring my PC and discs, and am finding myself getting thru more and more gigs without touching a disc.
 
Hmmm. nice review but not much was mentioned about the appearance of the L1. I get HUGE compliments from banquet managers about the looks first, then the sound. Clients like the Bose name. They like it a lot. I'm happy to ride the coat tail of all their marketing. When I need bigger sound I still have my Mackie 1501. During a Christmas party a competing dj who was in the other room heard the L1s hooked up to the mackie with 2 B1s as well and now owns a pair...can't say I'm all that happy about that.
 
On the opinion front, I am not sure that the audible difference is clear to most, as I dj with digital files from varied sources, and I can play you some ripped at 96 that will shake the walls.
Shaking the walls is not what you need to worry about with lower bitrates. Low frequencies do not have to be sampled as frequently to be reproduced accurately, but high frequencies do. You lose a lot of harmonic, spacial, and timbre information of the music when using lower bitrates, and THAT is where your concern should be.
 
A good pair of phones is the acid test for signal quality. A one hundred dollar pair of phones is better than a match for thousands of dollars worth of speakers and amplification.

Most technicians when worried about signal quality will reach for the headphones not only to localize the problem but to also be better able to hear the problem.
 
A good pair of phones is the acid test for signal quality. A one hundred dollar pair of phones is better than a match for thousands of dollars worth of speakers and amplification.

Most technicians when worried about signal quality will reach for the headphones not only to localize the problem but to also be better able to hear the problem.

Balanced you are correct and that is why a bad signal shows up worse on a PA system because you don't have a 20 to 20K frequency response as in a studio monitor or a pair of studio headphones. Instead of 20 to 20K response you are now dealing with a 38 to 50 hertz bottom end and a 16K to 18K top end. If you lower that response even more to say 85 to 12K hertz and push a bad signal throught it, it will become even more noticeable.