Inspiration for Tyrone's house next Christmas

To many ads? Support ODJT and see no ads!

jfactor1

New DJ
Aug 8, 2006
2,496
0
51
Central Michigan
I wouldn't be able to afford the electric bill that it would take to light up any of those!

Very cool !

Thanks,

Kirby
 
So... Essentially this company is selling Cat-5 based X10 stuff, huh?

Wonder if DMX relays would work better
 
That's what I was thinking...

Their big system has 128 channels. I don't see why this couldn't be done with a series of DMX dimmer packs and a DMX software program. You'd need 32 dimmer packs to accomplish the "BIG" show... Not sure if I'd want to put all those dimmer packs out on the front lawn.

OK, I've got the controller, software and two dimmer packs. I guess I could make 8 strings of lights blink... Jay, you've got me thinking. There must be a $1000 in extension cords alone, with the big show, not to mention all the strings of lights.

OK, I'll put a donation box up and see how full its gets. This stuff is for RICH people... not DJ's. I think the company equipment is a lot more cost effective ($2400 for the big package).

"Shillings for the poor"
 
Tyrone - Don't forget - we're not talking about dimmers here - simple relays.

Maybe not the 4 channel ones we have, but the 12 and 24 channel big guys.
 
Ty - go here for the lowdown on how it's done.

www.lindsaylights.com

They spell it out from A to Z.

Here's a synopsis from the Tech end of their website:

The display can draw over 38 000 watts of power at peak periods which is equivalent to 317 amps at 120 volts. This is serious power, which is why it must be supplied safely. In the summer of 2002 we upgraded our main entrance service from 100 amps to 200 (200 amps at 240V, which is 400 amps @120v). Of course, after we completed the installation, our work was inspected by the Electrical Safety Authority. Two 100 amp sub-panels have been designated for the display, and are shown later on.

The Utility Company supplies triplex cable to the house, which is what these wires connect to. The wires then connect to the meter base, and finally to the main breaker panel inside the house. There are many guidelines that govern the location, height, wire size etc. of this installation, which is why this work is normally performed by a certified electrician.
 
OK... I'll work on it...

Maybe I could use it as a tax deduction as advertising. You gotta keep me stoked on the idea this summer.